A method for calibrating three-dimensional positron emission tomography without scatter correction

Calibration for three-dimensional positron emission tomography (3D PET) using a uniform cylinder and cross-calibration with aliquots requires correction for scatter and attenuation. Thus the accuracy of thecalibration is dependent on the scatter correction method, and on the applicability of the scatter correction for different regions of the body. A method has been developed which provides a calibration which does not require correction for scatter or attenuation, making it generally applicable and independent of the scatter correction. The method has been previously described for measurement of the absolute sensitivity of tomography devices. This approach has been extended to give a calibration of the PET camera “in air” in units of kBq/pixel. The reconstructed images are multiplied by this factor to, give accurate activity concentrations, after attenuation and scatter correction. The method has been used with a fully 3D filtered back-projection (reprojection) algorithm and iterative convolution-subtraction scatter correction on data from an ECAT 953B. Using this method 3D PET images have been calibrated te, within ±5% accuracy, but this is highly dependent on the accuracy of the scatter correction. The method described here is practical and provides a means of calibrating a 3D PET system without the need for correction for scatter or attenuation of the calibration data.

[1]  C. Bohm,et al.  Correction for Scattered Radiation in a Ring Detector Positron Camera by Integral Transformation of the Projections , 1983, Journal of computer assisted tomography.

[2]  Dale L. Bailey,et al.  A method for measuring the absolute sensitivity of positron emission tomographic scanners , 1991, European Journal of Nuclear Medicine.

[3]  S R Meikle,et al.  A convolution-subtraction scatter correction method for 3D PET. , 1994, Physics in medicine and biology.

[4]  Lingxiong Shao,et al.  Cross Plane Scattering Correction - Point Source Deconvolution In PET , 1990, 1990 IEEE Nuclear Science Symposium Conference Record.

[5]  D. Townsend,et al.  An investigation of practical scatter correction techniques for 3D PET , 1994 .

[6]  E. Hoffman,et al.  Correction and characterization of scattered events in three-dimensional PET using scanners with retractable septa. , 1993, Journal of nuclear medicine : official publication, Society of Nuclear Medicine.

[7]  Martin J. Lercher,et al.  Scatter correction in 3-D PET , 1994, IEEE Trans. Medical Imaging.

[8]  R. K. Wu,et al.  Absolute quantitation of radioactivity using the buildup factor. , 1984, Medical physics.

[9]  Christopher J. Thompson,et al.  The effect of collimation on scatter fraction in multi-slice PET , 1988 .

[10]  J. H. Hubbell.  A power-series buildup factor formulation. Application to rectangular and off-axis disk source problems , 1963 .

[11]  J. H. Hubbell,et al.  Photon cross sections, attenuation coefficients, and energy absorption coefficients from 10 keV to 100 GeV , 1969 .

[12]  Paul Kinahan,et al.  Analytic 3D image reconstruction using all detected events , 1989 .

[13]  Joel S. Karp,et al.  Triple energy window scatter correction technique in PET , 1994, IEEE Trans. Medical Imaging.

[14]  Felicia Zito,et al.  Performance comparison of a state-of-the-art neuro-SPET scanner and a dedicated neuro-PET scanner , 1994, European Journal of Nuclear Medicine.

[15]  C. S. Higgins,et al.  Determination of radionuclide concentrations with positron CT scanning (PETT): concise communication. , 1977, Journal of Nuclear Medicine.