Evaluation of pavement mixture incorporating waste oil

Road construction necessitates a high amount of bitumen, which is a non-renewable material. The usage of reclaimed asphalt pavement (RAP) can be seen as a sustainable option, which offers economic benefits and conservation of natural resources. However, the high stiffness offered by RAP which leads to cracking has impelled the application of rejuvenator. The exploration of waste oil as the rejuvenator has gained the interest but they still lack of the information. This paper aims to highlight previous research works conducted on the waste oil application in the pavement materials. Large amount of waste product from the automotive industry and by-product of frying can impose adverse impact if not disposed properly. The properties of two types of waste oil namely waste engine oil (WEO) and waste cooking oil (WCO) were reviewed. Additionally, method incorporating waste oil in pavement materials, effects to the binder and mixture performance also included. It was observed that the effects of WEO and WCO are commonly produced both of the adverse and good effects to the pavement. The temperature, amount of waste oil and RAP are notable to give significant influence on the performance properties.

[1]  Jim Brownbridge.  The role of an asphalt rejuvenator in pavement preservation use and need for asphalt rejuvenation , 2010 .

[2]  John C Ssempebwa,et al.  The generation, use and disposal of waste crankcase oil in developing countries: a case for Kampala district, Uganda. , 2009, Journal of hazardous materials.

[3]  M. Karim,et al.  Investigation on physical properties of waste cooking oil – Rejuvenated bitumen binder , 2012 .

[4]  Khanji Harijan,et al.  A Comparative Study of Recycling of Used Engine Oil Using Extraction by Composite Solvent, Single Solvent, and Acid Treatment Methods , 2013 .

[5]  Qunwei Wang,et al.  Waste cooking oil as an energy resource: Review of Chinese policies , 2012 .

[6]  Martin van de Ven,et al.  Properties of capsules containing rejuvenators for their use in asphalt concrete , 2011 .

[7]  Nam H Tran,et al.  Effect of Rejuvenator on Performance Properties of HMA Mixtures with High RAP and RAS Contents , 2012 .

[8]  Subhash Bhatia,et al.  Feasibility of edible oil vs. non-edible oil vs. waste edible oil as biodiesel feedstock , 2008 .

[9]  I Widyatmoko.  Mechanistic-empirical mixture design for hot mix asphalt pavement recycling , 2008 .

[10]  M. Al‐Ghouti,et al.  Virgin and recycled engine oil differentiation: a spectroscopic study. , 2009, Journal of environmental management.

[11]  R. N. Hunter,et al.  The Shell bitumen handbook , 2015 .

[12]  R Vazquez-Duhalt,et al.  Environmental impact of used motor oil. , 1989, The Science of the total environment.

[13]  Kemas Ahmad Zamhari,et al.  A study on the technical viability of utilizing used lubricating oil as rejuvenating agent in relaimed asphalt pavement , 2011 .

[14]  Muhamad Nazri Borhan,et al.  Used Cylinder Oil Modified Cold-Mix Asphalt Concrete , 2007 .

[15]  Naveed Anwar,et al.  Recycling of Automotive Lubricating Waste Oil and Its Quality Assessment for Environment-Friendly Use , 2012 .

[16]  Shu Wei Goh,et al.  Evaluation of Low-Temperature Binder Properties of Warm-Mix Asphalt, Extracted and Recovered RAP and RAS, and Bioasphalt , 2011 .

[17]  Ludo Zanzotto,et al.  Asphalt modification with used lubricating oil , 2008 .

[18]  S. Abdullah,et al.  Utilization of palm empty fruit bunch for the production of biodiesel from Jatropha curcas oil. , 2012, Bioresource technology.

[19]  Majid Zargar,et al.  Investigation of the possibility of using waste cooking oil as a rejuvenating agent for aged bitumen. , 2012, Journal of hazardous materials.

[20]  O. A. Bamiro,et al.  PILOT STUDY OF USED OILS IN NIGERIA , 2004 .

[21]  M. G. Kulkarni,et al.  WASTE COOKING OIL – AN ECONOMICAL SOURCE FOR BIODIESEL: A REVIEW , 2006 .

[22]  Boming Tang,et al.  Effects of rejuvenator on performance-based properties of rejuvenated asphalt binder and mixtures , 2007 .

[23]  M. El-Fadel,et al.  Strategies for vehicle waste-oil management: a case study , 2001 .

[24]  Mohd Rosli Hainin,et al.  Fundamental and rheological properties of oil palm fruit ash modified bitumen , 2013 .

[25]  Mohamed Rehan Karim,et al.  A review on fatigue and rutting performance of asphalt mixes , 2011 .

[26]  Junan Shen,et al.  Determining Rejuvenator Content for Recycling Reclaimed Asphalt Pavement by SHRP Binder Specifications , 2002 .

[27]  M. E. Muñoz,et al.  Rheological aspects of the rejuvenation of aged bitumen , 2006 .

[28]  M. R. Hainin,et al.  Modelling the rheological properties of bituminous binders using the 2S2P1D Model , 2013 .

[29]  M. R. Hainin,et al.  Rutting Evaluation of Aged Binder Containing Waste Engine Oil , 2014 .

[30]  Muhamad Nazri Borhan,et al.  The effects of used cylinder oil on asphalt mixes , 2009 .

[31]  Ali Jamshidi,et al.  Selection of reclaimed asphalt pavement sources and contents for asphalt mix production based on asphalt binder rheological properties, fuel requirements and greenhouse gas emissions , 2012 .

[32]  Christopher Daniel DeDene,et al.  Investigation of using waste engine oil blended with reclaimed asphalt materials to improve pavement recyclability , 2011 .

[33]  Zhanping You,et al.  Properties of Recovered Asphalt Binder Blended with Waste Engine Oil: A Preliminary Study , 2011 .

[34]  Bilal S. Hamad,et al.  Effect of used engine oil on properties of fresh and hardened concrete , 2003 .

[35]  Mohd Ezree Abdullah,et al.  Rheological Properties of Asphalt Binder Modified with Chemical Warm Asphalt Additive , 2013 .

[36]  Mohd Rosli Hainin,et al.  Modelling the rheological properties of bituminous binders using mathematical equations , 2013 .