Direct Writing Technology Advances and Developments
暂无分享,去创建一个
Ian M. Hutchings | Lin Li | K.K.B. Hon | K. Hon | I. Hutchings | Lin Li
[1] Gideon Levy,et al. RAPID MANUFACTURING AND RAPID TOOLING WITH LAYER MANUFACTURING (LM) TECHNOLOGIES, STATE OF THE ART AND FUTURE PERSPECTIVES , 2003 .
[2] Vincent Malba,et al. Laser surface modification for selective electroplating of metal: A 2.5 m/s laser direct write process , 1992 .
[3] A. N. Jette,et al. Metal deposition at 532 nm using a laser transfer technique , 1988 .
[4] Qingbin Liu,et al. High precision solder droplet printing technology and the state-of-the-art , 2001 .
[5] Osman A. Basaran,et al. Small‐scale free surface flows with breakup: Drop formation and emerging applications , 2002 .
[6] F. Foulon,et al. Argon-ion laser direct-write Al deposition from trialkylamine alane precursors , 1993 .
[7] O. Lehmann,et al. Three-dimensional laser direct writing of electrically conducting and isolating microstructures , 1994 .
[8] M. Marengo,et al. The impact of a single drop on a wetted solid surface , 1997 .
[9] Herbert Schulz,et al. High-Speed Machining , 1992 .
[10] J. Tlusty. High-Speed Machining , 1993 .
[11] Bruce Zhi Gao,et al. Dimensionless parameters for the design of optical traps and laser guidance systems. , 2004, Applied optics.
[12] R. A. McGill,et al. A novel laser transfer process for direct writing of electronic and sensor materials , 1999 .
[13] J. C. Morgan,et al. Focused ion beam mask repair , 1998 .
[14] Costas Fotakis,et al. Laser patterning of Zn for ZnO nanostructure growth: Comparison between laser induced forward transfer in air and in vacuum , 2007 .
[15] R. E. Acosta,et al. Investigation of Laser‐Enhanced Electroplating Mechanisms , 1981 .
[16] B R Ringeisen,et al. Generation of mesoscopic patterns of viable Escherichia coli by ambient laser transfer. , 2002, Biomaterials.
[17] Q Liu,et al. On precision droplet-based net-form manufacturing technology , 2001 .
[18] D. M. Tanner,et al. Electrical and chemical characterization of FIB-deposited insulators , 1997 .
[19] F. J. Adrian,et al. Metal deposition from a supported metal film using an excimer laser , 1986 .
[20] William Paul King,et al. Thermal Dip Pen Nanolithography , 2006 .
[21] Orven F. Swenson,et al. Aerosol flow through a long micro-capillary: collimated aerosol beam , 2008 .
[22] R. T. Hill,et al. Direct-write fabrication of functional protein matrixes using a low-cost Q-switched laser. , 2006, Analytical chemistry.
[23] E. Katz,et al. Nanoparticle arrays on surfaces for electronic, optical, and sensor applications. , 2000, Chemphyschem : a European journal of chemical physics and physical chemistry.
[24] Paul J. Campagnola,et al. Submicron Multiphoton Free-Form Fabrication of Proteins and Polymers: Studies of Reaction Efficiencies and Applications in Sustained Release , 2000 .
[25] D. Odde,et al. Laser-guided direct writing for applications in biotechnology. , 1999, Trends in biotechnology.
[26] Scott A. Mathews,et al. Laser direct-write and its application in low temperature Co-fired ceramic (LTCC) technology , 2003 .
[27] H. Kudo,et al. Superplastic Precision Forming of Ti-Alloy Integrated Turbine Disc , 1986 .
[28] Alberto Piqué,et al. Direct-write technologies for rapid prototyping applications : sensors, electronics and integrated power sources , 2002 .
[29] Lubomyr T. Romankiw,et al. Laser-enhanced plating and etching: mechanisms and applications , 1982 .
[30] Bo Li,et al. ROBUST DIRECT-WRITE DISPENSING TOOL AND SOLUTIONS FOR MICRO/MESO-SCALE MANUFACTURING AND PACKAGING , 2007 .
[31] R. T. Hill,et al. Microfabrication of three-dimensional bioelectronic architectures. , 2005, Journal of the American Chemical Society.
[32] Donald J. Hayes,et al. MicroJet printing of solder and polymers for multi-chip modules and chip-scale packages , 1999 .
[33] Mark A. Ratner,et al. Self-assembly of ink molecules in dip-pen nanolithography: A diffusion model , 2001 .
[34] U. Schubert,et al. Inkjet Printing of Polymers: State of the Art and Future Developments , 2004 .
[35] Alberto Piqué,et al. Rapid prototyping of micropower sources by laser direct-write , 2004 .
[36] Horacio Dante Espinosa,et al. A multi-ink linear array of nanofountain probes , 2006 .
[37] S. Schiaffino,et al. Molten droplet deposition and solidification at low Weber numbers , 1997 .
[38] Hong,et al. Multiple ink nanolithography: toward a multiple-Pen nano-plotter , 1999, Science.
[39] A Ahluwalia,et al. Microsyringe-based deposition of two-dimensional and three-dimensional polymer scaffolds with a well-defined geometry for application to tissue engineering. , 2002, Tissue engineering.
[40] Robert Puers,et al. A review of focused ion beam applications in microsystem technology , 2001 .
[41] S. D. Allen,et al. Laser Enhanced Electroless Plating of Micron‐Scale Copper Wires , 2000 .
[42] Jooho Moon,et al. Control of colloidal particle deposit patterns within picoliter droplets ejected by ink-jet printing. , 2006, Langmuir : the ACS journal of surfaces and colloids.
[43] Alberto Piqué,et al. Li-ion microbatteries generated by a laser direct-write method , 2004 .
[44] Chad A Mirkin,et al. Massively parallel dip-pen nanolithography with 55 000-pen two-dimensional arrays. , 2006, Angewandte Chemie.
[45] Karsten Haupt,et al. Direct writing of molecularly imprinted microstructures using a nanofountain pen , 2007 .
[46] J. Bridgwater,et al. The extrusion mechanics of pastes—the influence of paste formulation on extrusion parameters , 1987 .
[47] R. A. McGill,et al. Laser transfer of biomaterials: Matrix-assisted pulsed laser evaporation (MAPLE) and MAPLE Direct Write , 2003 .
[48] Jesper Serbin,et al. Three-dimensional nanostructuring of hybrid materials by two-photon polymerization , 2003, SPIE Optics + Photonics.
[49] R. A. McGill,et al. Laser deposition of polymer and biomaterial films. , 2003, Chemical reviews.
[50] Bahaa E. A. Saleh,et al. Acrylic-based resin with favorable properties for three-dimensional two-photon polymerization , 2004 .
[51] Takuji Ogawa,et al. Electronic conductive characteristics of devices fabricated with 1,10-decanedithiol and gold nanoparticles between 1-μm electrode gaps , 2001 .
[52] R. A. McGill,et al. The deposition, structure, pattern deposition, and activity of biomaterial thin-films by matrix-assisted pulsed-laser evaporation (MAPLE) and MAPLE direct write , 2001 .
[53] Thomas A. Baer,et al. Hierarchically Structured Functional Porous Silica and Composite Produced by Evaporation-Induced Self-Assembly , 2001 .
[54] Robert Lee Melcher,et al. Laser enhanced electroplating and maskless pattern generation , 1979 .
[55] Sawyer B. Fuller,et al. Ink-jet printed nanoparticle microelectromechanical systems , 2002 .
[56] R. Hagedorn,et al. Laser-direct-write creation of three-dimensional OREST microcages for contact-free trapping, handling and transfer of small polarizable neutral objects in solution , 2005 .
[57] Thomas M Truskett,et al. Is random close packing of spheres well defined? , 2000, Physical review letters.
[58] H. D. Wu,et al. Direct writing of conformal mesoscopic electronic devices by MAPLE DW , 2000 .
[59] Eric Fogarassy,et al. Laser‐induced forward transfer of high‐Tc YBaCuO and BiSrCaCuO superconducting thin films , 1989 .
[60] Marco Marengo,et al. Time evolution of liquid drop impact onto solid, dry surfaces , 2002 .
[61] Tarasankar Pal,et al. Molecular Photonic Switches Employing Ions and Nanoparticles of Coinage and Platinum Metals , 2000 .
[62] I. Hutchings,et al. Inkjet printing - the physics of manipulating liquid jets and drops , 2008 .
[63] Robert E. Newnham,et al. Particle size dependent high frequency dielectric properties of barium titanate , 1996, ISAF '96. Proceedings of the Tenth IEEE International Symposium on Applications of Ferroelectrics.
[64] G. Schatz,et al. Anomalous surface diffusion in nanoscale direct deposition processes. , 2003, Physical review letters.
[65] Alberto Piqué,et al. Time-resolved optical microscopy of a laser-based forward transfer process , 2001 .
[66] John D. Perkins,et al. Direct-write inkjet printing for fabrication of barium strontium titanate-based tunable circuits , 2007 .
[67] Horacio D Espinosa,et al. A nanofountain probe with Sub-100 nm molecular writing resolution. , 2005, Small.
[68] K. Yoshino,et al. Absorption cross-section measurements of water vapor in the wavelength region 181 199 nm , 2003 .
[69] A. Yarin. Drop Impact Dynamics: Splashing, Spreading, Receding, Bouncing ... , 2006 .
[70] P. Calvert. Inkjet Printing for Materials and Devices , 2001 .
[71] M. Wanke,et al. Laser Rapid Prototyping of Photonic Band-Gap Microstructures , 1997, Science.
[72] Olivier Pouliquen,et al. Crystallization of non-Brownian Spheres under Horizontal Shaking , 1997 .
[73] Marc Schmidt,et al. Growth of patterned thin metal oxide films on glass substrates from metallic bulk sources using a Q-switched YAG laser , 2005 .
[74] M. E. Gross,et al. A chemical and mechanistic view of reaction profiles in laser direct‐write metallization in metallo‐organic films. Gold. , 1986 .
[75] Alberto Piqué,et al. Laser printing of nanocomposite solid-state electrolyte membranes for Li micro-batteries , 2006 .
[76] A. Doraiswamy,et al. Laser microfabrication of hydroxyapatite-osteoblast-like cell composites. , 2007, Journal of biomedical materials research. Part A.
[77] J. Lewis,et al. Direct writing in three dimensions , 2004 .
[78] Klaus Edinger,et al. Study of precursor gases for focused ion beam insulator deposition , 1998 .
[79] Stewart Xu Cheng,et al. Producing molten metal droplets with a pneumatic droplet-on-demand generator , 2005 .
[80] Y. Nahmias,et al. Laser-guided direct writing for three-dimensional tissue engineering. , 2005, Biotechnology and bioengineering.
[81] K. A. Padmanabhan,et al. Superplasticity: A review , 1970 .
[82] Jang Sub Kim,et al. Direct writing of copper conductive patterns by ink-jet printing , 2007 .
[83] Xu,et al. "Dip-Pen" nanolithography , 1999, Science.
[84] J. M. Fernández-Pradas,et al. Laser-induced forward transfer of liquids: Study of the droplet ejection process , 2006 .
[85] M. Mickle,et al. Formulation and processing of novel conductive solution inks in continuous inkjet printing of 3-D electric circuits , 2005, IEEE Transactions on Electronics Packaging Manufacturing.
[86] B. Meinders,et al. Selective metallization of alumina by laser , 1991 .
[87] Fred Mitlitsky,et al. Wafer‐scale laser pantography: Fabrication of n‐metal‐oxide‐semiconductor transistors and small‐scale integrated circuits by direct‐write laser‐induced pyrolytic reactions , 1983 .
[88] M. Boman,et al. Freeform fabrication of functional microsolenoids, electromagnets and helical springs using high-pressure laser chemical vapor deposition , 1999, Technical Digest. IEEE International MEMS 99 Conference. Twelfth IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.99CH36291).
[89] Costas Fotakis,et al. ZnO nanorod micropatterning via laser-induced forward transfer , 2007 .
[90] Thomas W. Kenny,et al. Atomic force microscope cantilevers for combined thermomechanical data writing and reading , 2001 .
[91] Brian Derby,et al. Ink‐Jet Printing and Sintering of PZT , 2005 .
[92] J. M. Fernández-Pradas,et al. Laser direct writing of biomolecule microarrays , 2004 .
[93] Richard J. Young,et al. Focused ion beam insulator deposition , 1995 .
[94] J. M. Fernández-Pradas,et al. Laser-induced forward transfer of biomolecules , 2004 .
[95] Ekkard Brinksmeier,et al. Assessment of Grinding Fluid Effectiveness in Continuous-Dress Creep Feed Grinding , 2002 .
[96] P. K. Gallagher,et al. Laser direct‐write metallization in thin palladium acetate films , 1987 .
[97] Chaim N. Sukenik,et al. Fountain pen nanochemistry: Atomic force control of chrome etching , 1999 .
[98] A. Ashkin. Forces of a single-beam gradient laser trap on a dielectric sphere in the ray optics regime. , 1992, Methods in cell biology.
[99] H. Le,et al. Progress and Trends in Ink-jet Printing Technology , 1998, Journal of Imaging Science and Technology.
[100] Kyoil Hwang,et al. Analysis of Line width with Nano Fountain Pen Using Active Membrane Pumping , 2007, 2007 2nd IEEE International Conference on Nano/Micro Engineered and Molecular Systems.
[101] M. Colina,et al. DNA deposition through laser induced forward transfer. , 2005, Biosensors & bioelectronics.
[102] Lee Mein Wee,et al. Multiple-layer laser direct writing metal deposition in electrolyte solution , 2005 .
[103] Bo Li,et al. A Robust True Direct-Print Technology for Tissue Engineering , 2007 .
[104] Satoshi Kawata,et al. Finer features for functional microdevices , 2001, Nature.
[105] L. Tanner,et al. The spreading of silicone oil drops on horizontal surfaces , 1979 .
[106] D. Odde,et al. Laser-guided direct writing of living cells. , 2000, Biotechnology and bioengineering.
[107] Susan D. Allen,et al. High deposition rate laser direct writing of Al on Si , 1991 .
[108] Alberto Piqué,et al. Laser-printed thick-film electrodes for solid-state rechargeable Li-ion microbatteries , 2007 .
[109] Brian Derby,et al. Freeform fabrication by controlled droplet deposition of powder filled melts , 2002 .
[110] J A Barron,et al. Biological Laser Printing: A Novel Technique for Creating Heterogeneous 3-dimensional Cell Patterns , 2004, Biomedical microdevices.
[111] Brent A. Nelson,et al. Nanoscale deposition of solid inks via thermal dip pen nanolithography , 2004 .