NetScatter: Enabling Large-Scale Backscatter Networks

We present the first wireless protocol that scales to hundreds of concurrent transmissions from backscatter devices. Our key innovation is a distributed coding mechanism that works below the noise floor, operates on backscatter devices and can decode all the concurrent transmissions at the receiver using a single FFT operation. Our design addresses practical issues such as timing and frequency synchronization as well as the near-far problem. We deploy our design using a testbed of backscatter hardware and show that our protocol scales to concurrent transmissions from 256 devices using a bandwidth of only 500 kHz. Our results show throughput and latency improvements of 14--62x and 15--67x over existing approaches and 1--2 orders of magnitude higher transmission concurrency.

[1]  Joshua R. Smith,et al.  Inter-Technology Backscatter: Towards Internet Connectivity for Implanted Devices , 2016, SIGCOMM.

[2]  Mo Li,et al.  Come and Be Served: Parallel Decoding for COTS RFID Tags , 2015, MobiCom.

[3]  W. Gregg,et al.  On the Utility of Chirp Modulation for Digital Signaling , 1973, IEEE Trans. Commun..

[4]  W. Jin,et al.  Multiplexing of fiber Bragg grating sensors using a FMCW technique , 1999, IEEE Photonics Technology Letters.

[5]  Pan Hu,et al.  Leveraging interleaved signal edges for concurrent backscatter , 2014, MOCO.

[6]  Xin Meng,et al.  FlipTracer: Practical Parallel Decoding for Backscatter Communication , 2017, IEEE/ACM Transactions on Networking.

[7]  Sachin Katti,et al.  Localizing Low-power Backscatter Tags Using Commodity WiFi , 2017, CoNEXT.

[8]  Arseny Vasilyev,et al.  The Optoelectronic Swept-Frequency Laser and Its Applications in Ranging, Three-Dimensional Imaging, and Coherent Beam Combining of Chirped-Seed Amplifiers , 2013 .

[9]  Thiemo Voigt,et al.  LoRea: A Backscatter Architecture that Achieves a Long Communication Range , 2017, SenSys.

[10]  Mohammad Rostami,et al.  Enabling Practical Backscatter Communication for On-body Sensors , 2016, SIGCOMM.

[11]  D.M.J. Devasirvatham.  Time delay spread measurements of wideband radio signals within a building , 1984 .

[12]  Swarun Kumar,et al.  Empowering Low-Power Wide Area Networks in Urban Settings , 2017, SIGCOMM.

[13]  Joshua R. Smith,et al.  PASSIVE WI-FI: Bringing Low Power to Wi-Fi Transmissions , 2016, GETMBL.

[14]  Pan Hu,et al.  Laissez-Faire: Fully Asymmetric Backscatter Communication , 2015, SIGCOMM.

[15]  David Tse,et al.  Fundamentals of Wireless Communication , 2005 .

[16]  Xiaojiang Chen,et al.  PLoRa: a passive long-range data network from ambient LoRa transmissions , 2018, SIGCOMM.

[17]  A.A.M. Saleh,et al.  A Statistical Model for Indoor Multipath Propagation , 1987, IEEE J. Sel. Areas Commun..

[18]  David Wetherall,et al.  Ambient backscatter: wireless communication out of thin air , 2013, SIGCOMM.

[19]  Joshua R. Smith,et al.  Towards Battery-Free HD Video Streaming , 2018, NSDI.

[20]  Joshua R. Smith,et al.  Wi-fi backscatter , 2014, SIGCOMM 2015.

[21]  Piotr Indyk,et al.  Efficient and reliable low-power backscatter networks , 2012, CCRV.

[22]  Joshua R. Smith,et al.  LoRa Backscatter , 2017, Proc. ACM Interact. Mob. Wearable Ubiquitous Technol..