3D printing of shape changing composites for constructing flexible paper-based photothermal bilayer actuators

Developing flexible shape changing actuators by means of 3D printing has become an exciting research area and has been widely used in our daily life and they are expected to play more important roles in soft robotics, biomedical devices and other high-tech areas. However, the development of such 3D printed shape changing actuators is limited due to the lack of 3D printing functional materials and insufficient response sensitivity of the actuators. This study demonstrates the 3D printing of photo-responsive shape changing composites based on polylactic acid (PLA) and multi-walled carbon nanotubes (MWCNTs) on paper substrates with fused deposition modeling (FDM) printing technology for the construction of flexible photothermal-responsive shape changing actuators. Introducing MWCNTs to a PLA matrix results in the enhancement of processabilities of the MWCNT–PLA composite during the FDM printing process compared to pure PLA. In the MWCNT–PLA composite filaments prepared in this work, MWCNTs are dispersed homogeneously in the PLA matrix. Furthermore, the MWCNT–PLA composite exhibits excellent photothermal effects and sensitivity under near-infrared irradiation (NIR), with the temperature of the composite increasing up to the Tg of PLA after 1 s irradiation and also being close to the Tm of PLA after irradiation for 15 s. Paper-based bilayer semicircular actuators that possess phototriggered shape changing properties are fabricated via 3D printing of the MWCNT–PLA composite on paper, which deform under near infrared irradiation and recover their original shape once the light source is switched off. This facile 3D printing strategy for flexible paper-based actuators would provide tremendous opportunities for the design and fabrication of biomimetic photothermal actuators and soft robotics.

[1]  G. Whitesides,et al.  Foldable Printed Circuit Boards on Paper Substrates , 2010 .

[2]  Michael C. McAlpine,et al.  3D Printed Stretchable Tactile Sensors , 2017, Advanced materials.

[3]  Xiaodong Chen,et al.  3D Printed Photoresponsive Devices Based on Shape Memory Composites , 2017, Advanced materials.

[4]  Philippe Dubois,et al.  Shape-memory polymers for multiple applications in the materials world , 2016 .

[5]  Dong Yan,et al.  Pattern Transformation of Heat-Shrinkable Polymer by Three-Dimensional (3D) Printing Technique , 2015, Scientific Reports.

[6]  D. Cotton,et al.  A Multifunctional Capacitive Sensor for Stretchable Electronic Skins , 2009, IEEE Sensors Journal.

[7]  Feng Zhang,et al.  3D Printing of Graphene Aerogels. , 2016, Small.

[8]  Jeong Jae Wie,et al.  Photomotility of polymers , 2016, Nature Communications.

[9]  Y. Dzenis,et al.  Role of Mechanical Factors in Applications of Stimuli-Responsive Polymer Gels - Status and Prospects. , 2016, Polymer.

[10]  Wei Wang,et al.  Electrically Controllable Actuators Based on Supramolecular Peptide Hydrogels , 2016 .

[11]  A. Priimagi,et al.  Recent twists in photoactuation and photoalignment control , 2014 .

[12]  Tao Xie,et al.  Shape memory polymer network with thermally distinct elasticity and plasticity , 2016, Science Advances.

[13]  K. Walus,et al.  Paper as a platform for sensing applications and other devices: a review. , 2015, ACS applied materials & interfaces.

[14]  Aaron D. Mazzeo,et al.  Paper‐Based, Capacitive Touch Pads , 2012, Advanced materials.

[15]  Itamar Willner,et al.  Stimuli-Responsive DNA-Based Hydrogels: From Basic Principles to Applications. , 2017, Accounts of chemical research.

[16]  Hye Rin Kwag,et al.  Self-Folding Thermo-Magnetically Responsive Soft Microgrippers , 2015, ACS applied materials & interfaces.

[17]  Andres A. Aguirre-Pablo,et al.  Recyclable Nonfunctionalized Paper‐Based Ultralow‐Cost Wearable Health Monitoring System , 2017 .

[18]  Chao Yuan,et al.  Multi-shape active composites by 3D printing of digital shape memory polymers , 2016, Scientific Reports.

[19]  Yue Zhao,et al.  Light-triggered self-healing and shape-memory polymers. , 2013, Chemical Society reviews.

[20]  Wenjing Su,et al.  Additively Manufactured Nanotechnology and Origami-Enabled Flexible Microwave Electronics , 2015, Proceedings of the IEEE.

[21]  L. Ribba,et al.  Improving PLA ductility using only 0.05% of CNTs and 0.25% of an azo-dye , 2016 .

[22]  Suiyang Khoo,et al.  Evolution of 3D printed soft actuators , 2016 .

[23]  Jing Zhang,et al.  Paper‐Based Electrodes for Flexible Energy Storage Devices , 2017, Advanced science.

[24]  Dirk J. Broer,et al.  Accordion‐like Actuators of Multiple 3D Patterned Liquid Crystal Polymer Films , 2014 .

[25]  Leonid Ionov,et al.  Unusual and Superfast Temperature‐Triggered Actuators , 2015, Advanced materials.

[26]  L. Nyholm,et al.  Toward Flexible Polymer and Paper‐Based Energy Storage Devices , 2011, Advanced materials.

[27]  A. Steckl,et al.  Electrowetting on paper for electronic paper display. , 2010, ACS applied materials & interfaces.

[28]  Donghua Xu,et al.  Role of multi-wall carbon nanotube network in composites to crystallization of isotactic polypropylene matrix , 2008 .

[29]  Yen Wei,et al.  Regional Shape Control of Strategically Assembled Multishape Memory Vitrimers , 2016, Advanced materials.

[30]  Amir Hosein Sakhaei,et al.  Highly Stretchable and UV Curable Elastomers for Digital Light Processing Based 3D Printing , 2017, Advanced materials.

[31]  Tomaso Zambelli,et al.  Template‐Free 3D Microprinting of Metals Using a Force‐Controlled Nanopipette for Layer‐by‐Layer Electrodeposition , 2016, Advanced materials.

[32]  S. Sen,et al.  Stimuli-Responsive Macromolecular Composites: Enhanced Stress Modulation in Polypyrrole with Redox-Active Dopants , 2016 .

[33]  H. Kodama Automatic method for fabricating a three‐dimensional plastic model with photo‐hardening polymer , 1981 .

[34]  Li Yang,et al.  Conductive Inkjet-Printed Antennas on Flexible Low-Cost Paper-Based Substrates for RFID and WSN Applications , 2009, IEEE Antennas and Propagation Magazine.

[35]  Mark R. Cutkosky,et al.  A robotic device using gecko-inspired adhesives can grasp and manipulate large objects in microgravity , 2017, Science Robotics.

[36]  Chao Yuan,et al.  3D Printed Reversible Shape Changing Components with Stimuli Responsive Materials , 2016, Scientific Reports.

[37]  Tao Wang,et al.  Infrared-driving actuation based on bilayer graphene oxide-poly(N-isopropylacrylamide) nanocomposite hydrogels , 2014 .

[38]  Xiaodong Chen,et al.  Self‐Protection of Electrochemical Storage Devices via a Thermal Reversible Sol–Gel Transition , 2015, Advanced materials.

[39]  Florian D Jochum,et al.  Temperature- and light-responsive smart polymer materials. , 2013, Chemical Society reviews.

[40]  Manfred Hofmann,et al.  3D Printing Gets a Boost and Opportunities with Polymer Materials. , 2014, ACS macro letters.

[41]  Yong Liu,et al.  3D printing of smart materials: A review on recent progresses in 4D printing , 2015 .

[42]  M. Toivakka,et al.  Light‐Emitting Paper , 2015 .

[43]  V. Lakafosis,et al.  Paper-Based RFID-Enabled Wireless Platforms for Sensing Applications , 2009, IEEE Transactions on Microwave Theory and Techniques.

[44]  Wei Gao,et al.  Application of 3D Printing for Smart Objects with Embedded Electronic Sensors and Systems , 2016 .

[45]  Martin L. Dunn,et al.  Sequential Self-Folding Structures by 3D Printed Digital Shape Memory Polymers , 2015, Scientific Reports.

[46]  Yen Wei,et al.  Enabling the sunlight driven response of thermally induced shape memory polymers by rewritable CH3NH3PbI3 perovskite coating , 2017 .

[47]  Hisaaki Tobushi,et al.  Shape recovery and irrecoverable strain control in polyurethane shape-memory polymer , 2008, Science and technology of advanced materials.

[48]  Kwanwoo Shin,et al.  Paper-Based Bimodal Sensor for Electronic Skin Applications. , 2017, ACS applied materials & interfaces.

[49]  Dowan Kim,et al.  Photothermally driven fast responding photo-actuators fabricated with comb-type hydrogels and magnetite nanoparticles , 2015, Scientific Reports.

[50]  Yu-Zhong Wang,et al.  Design of Poly(L-lactide)-Poly(ethylene glycol) Copolymer with Light-Induced Shape-Memory Effect Triggered by Pendant Anthracene Groups. , 2016, ACS applied materials & interfaces.

[51]  Weili Yu,et al.  Monolithic polyaniline/polyvinyl alcohol nanocomposite actuators with tunable stimuli-responsive properties , 2010 .

[52]  Danish Iqbal,et al.  Photo-Responsive Shape-Memory and Shape-Changing Liquid-Crystal Polymer Networks , 2013, Materials.

[53]  Chen Chen,et al.  Reduced Graphene Oxide-Containing Smart Hydrogels with Excellent Electro-Response and Mechanical Properties for Soft Actuators. , 2017, ACS applied materials & interfaces.