A high resolution (σ ~ 2 μm) beam telescope based on monolithic active pixel sensors (MAPS) was developed within the EUDET collaboration. The telescope consists of six sensor planes using Mimosa26 MAPS with a pixel pitch of 18.4 μm and thinned down to 50 μm. The excellent resolution, readout rate and DAQ integration capabilities made the telescope a primary test beam tool for many groups including several CERN based experiments. Within the new European detector infrastructure project AIDA the test beam telescope will be further extended in terms of cooling infrastructure, readout speed and precision. In order to provide a system optimized for the different requirements by the user community, a combination of various pixel technologies is foreseen. In this report the design of this even more flexible telescope with three different pixel technologies (TimePix, Mimosa, ATLAS FE-I4) will be presented. First test beam results with the HitOR signal provided by the FE-I4 integrated into the triggering scheme will be shown.
[1]
M. Backhaus,et al.
Implementation of a configurable FE-I4 trigger plane for the AIDA telescope
,
2014
.
[2]
Yavuz Degerli,et al.
First reticule size MAPS with digital output and integrated zero suppression for the EUDET-JRA1 beam telescope
,
2010
.
[3]
I. Rubinskiy.
An EUDET/AIDA Pixel Beam Telescope for Detector Development
,
2012
.
[4]
Michael Campbell,et al.
Charged particle tracking with the Timepix ASIC
,
2011,
1103.2739.
[5]
Rafael Ballabriga,et al.
Timepix, a 65k programmable pixel readout chip for arrival time, energy and/or photon counting measurements
,
2007
.
[6]
Heinz Pernegger,et al.
ATLAS Insertable B-Layer Technical Design Report
,
2010
.