Scandate Dispenser Cathode Fabrication for A High-Aspect-Ratio High-Current-Density Sheet Beam Electron Gun

A high-current-density scandate tungsten dispenser cathode was used for the demonstration of a 25 : 1-aspect-ratio 750-A/cm2 -current-density sheet beam for the Defence Advanced Research Project Agency High-Frequency Integrated Vacuum Electronics (HiFIVE) program intended for the realization of a wideband ( ~ 30%) 220-GHz traveling wave tube. The elliptical cathode with homogeneous microstructure was made from 1-2-μm-size tungsten powder added with nanosized Scandia using the sol-gel method; it has a current density of up to 160 A/cm2 at 1050 °C. A sheet beam gun analyzer was built to test the terahertz sheet beam gun and determine the size and current density of a sheet electron beam produced by the impregnated scandate tungsten dispenser cathode. A sheet electron beam with an aspect ratio of 12.5 : 1 with a current density exceeding 375 A/cm2 has been obtained using a BVERI impregnated scandate dispenser cathode without magnetic compression; further magnetic field compression would give the final current density of 750 A/cm2.

[1]  S. Michizono,et al.  Performance of a high-power klystron using a BI cathode in the KEK electron linac , 1999 .

[2]  A. Ritz,et al.  Emission properties of top-layer scandate cathodes prepared by LAD , 1997 .

[3]  Yiman Wang,et al.  Characteristics of scandate-impregnated cathodes with sub-micron scandia-doped matrices , 2005 .

[4]  Wei Liu,et al.  Development of High Current-Density Cathodes With Scandia-Doped Tungsten Powders , 2007, IEEE Transactions on Electron Devices.

[5]  D. Wiechert,et al.  Supply and loss mechanisms of Ba dispenser cathodes , 1999 .

[6]  G. Park,et al.  Evanescent tunneling of an effective surface plasmon excited by convection electrons. , 2007, Physical review letters.

[7]  Gun-Sik Park,et al.  Superradiant terahertz Smith-Purcell radiation from surface plasmon excited by counterstreaming electron beams , 2007 .

[8]  Min Zhu,et al.  Investigation and application of impregnated scandate cathodes , 2003 .

[9]  I. Jawahir,et al.  An investigation of sustained machining performance for controlled surface quality requirements in porous tungsten , 2005, IEEE Transactions on Electron Devices.

[10]  N. C. Luhmann,et al.  High Current Density and Long-Life Nanocomposite Scandate Dispenser Cathode Fabrication , 2011, IEEE Transactions on Electron Devices.

[11]  S. Yamamoto,et al.  Investigation of Sc2O3mixed-matrix Ba—Ca aluminate-impregnated cathodes , 1984, IEEE Transactions on Electron Devices.

[12]  J. Crombeen,et al.  Properties and manufacture of top-layer scandate cathodes , 1986 .

[13]  D. Barratt,et al.  Life-limiting mechanisms in Ba-oxide, Ba-dispenser and Ba-Scandate cathodes , 2004, IVESC 2004. The 5th International Vacuum Electron Sources Conference Proceedings (IEEE Cat. No.04EX839).

[14]  R. E. Thomas,et al.  Investigation of scandate cathodes: emission, fabrication, and activation processes , 1989 .

[15]  John H. Booske,et al.  Plasma physics and related challenges of millimeter-wave-to-terahertz and high power microwave generationa) , 2008 .

[16]  Takuji Kimura,et al.  8.3: A high aspect ratio, high current density sheet beam electron gun , 2010, 2010 IEEE International Vacuum Electronics Conference (IVEC).

[17]  L.M. Earley,et al.  Technology development for a mm-wave sheet-beam traveling-wave tube , 2005, IEEE Transactions on Plasma Science.

[18]  J. Hasker,et al.  Scandium supply after ion bombardment on scandate cathodes , 1990 .

[19]  Diana Gamzina,et al.  8.4: Terahertz sheet beam gun analyzer , 2010, 2010 IEEE International Vacuum Electronics Conference (IVEC).

[20]  Yiman Wang,et al.  Preparation and characterization of scandia and Re doped tungsten matrix impregnated cathode , 2007 .

[21]  L.M. Earley,et al.  Beam Line Design, Beam Alignment Procedure, and Initial Results for the$W$-Band Gain Experiment at Los Alamos , 2006, IEEE Transactions on Plasma Science.

[22]  Yiman Wang,et al.  Recent Developments in Scandia-Doped Dispenser Cathodes , 2006, 2006 IEEE International Vacuum Electronics Conference held Jointly with 2006 IEEE International Vacuum Electron Sources.

[23]  Gun-Sik Park,et al.  Experimental investigations on miniaturized vacuum electron devices , 2004, IVESC 2004. The 5th International Vacuum Electron Sources Conference Proceedings (IEEE Cat. No.04EX839).

[24]  Ji Li,et al.  A novel nanocomposite scandia-tungsten coated dispenser cathode , 2009, 2009 IEEE International Vacuum Electronics Conference.

[25]  N. Luhmann,et al.  17.5: High current density and long life nanocomposite scandate dispenser cathode fabrication , 2009 .