Zirconia brackets: an evaluation of morphology and coefficients of friction.

The frictional characteristics of two types of zirconia (Harmony, Hudson Ltd., Sheffield, U.K., and Toray, Yamaura Corp., Tokyo, Japan) brackets were compared with those of polycrystalline alumina (Transcend 2000, Unitek Corp., Monrovia, Calif.) brackets in both dry and wet states. To compare the couples, four arch wire alloys were studied: stainless steel, cobalt-chromium, nickel titanium, and beta-titanium. Under dry conditions, the highest frictional coefficients were seen with the Harmony/beta-titanium couple (uk = 0.64); the lowest values were seen with both Transcend 2000/stainless steel (uk = 0.13) and Toray/cobalt-chromium couples (uk = 0.13). Beta-titanium arch wires produced the highest coefficients of friction against each type of ceramic bracket, except against Toray arch wires in the wet state. The presence of human saliva produced only slight changes in the frictional behavior of zirconia brackets. We conclude that currently available zirconia brackets offer no significant improvement over alumina brackets with regard to their frictional characteristics.

[1]  R DeLong,et al.  Development of an Artificial Oral Environment for the Testing of Dental Restoratives: Bi-axial Force and Movement Control , 1983, Journal of dental research.

[2]  D. Hensler,et al.  Light scattering from fused polycrystalline aluminum oxide surfaces. , 1972, Applied optics.

[3]  M Heller,et al.  Mechanical properties and short-term in-vivo evaluation of yttrium-oxide-partially-stabilized zirconia. , 1989, Journal of biomedical materials research.

[4]  R. Kusy,et al.  Frictional coefficients of ion-implanted alumina against ion-implanted beta-titanium in the low load, low velocity, single pass regime. , 1992, Dental materials : official publication of the Academy of Dental Materials.

[5]  R. Kusy,et al.  Effect of salivary viscosity on frictional coefficients of orthodontic archwire/bracket couples , 1995 .

[6]  R. Kusy,et al.  Surface topography and frictional characteristics of ceramic brackets. , 1994, American journal of orthodontics and dentofacial orthopedics : official publication of the American Association of Orthodontists, its constituent societies, and the American Board of Orthodontics.

[7]  S. Kapila,et al.  Evaluation of friction between ceramic brackets and orthodontic wires of four alloys. , 1990, American journal of orthodontics and dentofacial orthopedics : official publication of the American Association of Orthodontists, its constituent societies, and the American Board of Orthodontics.

[8]  R. Kusy,et al.  Coefficient of Friction Characterization of Surface-Modified Polycrystalline Alumina , 1993 .

[9]  L. Winchester.  Bond strengths of five different ceramic brackets: an in vitro study. , 1991, European journal of orthodontics.

[10]  S. Springate,et al.  An Evaluation of Zirconium Oxide Brackets: A Preliminary Laboratory and Clinical Report , 1991, British journal of orthodontics.

[11]  K. Tanne,et al.  Wire friction from ceramic brackets during simulated canine retraction. , 2009, The Angle orthodontist.

[12]  J. B. Douglass,et al.  Enamel wear caused by ceramic brackets. , 1989, American journal of orthodontics and dentofacial orthopedics : official publication of the American Association of Orthodontists, its constituent societies, and the American Board of Orthodontics.

[13]  R P Kusy,et al.  Comparison of the frictional coefficients for selected archwire-bracket slot combinations in the dry and wet states. , 2009, The Angle orthodontist.

[14]  R. Rawlings,et al.  Mechanical behaviour of zirconia and zirconia-toughened alumina in a simulated body environment. , 1990, Biomaterials.

[15]  R P Kusy,et al.  Effects of surface roughness on the coefficients of friction in model orthodontic systems. , 1990, Journal of biomechanics.

[16]  J C Gunsolley,et al.  Frictional resistance of ceramic and stainless steel orthodontic brackets. , 1990, American journal of orthodontics and dentofacial orthopedics : official publication of the American Association of Orthodontists, its constituent societies, and the American Board of Orthodontics.

[17]  J. Powers,et al.  Bond strength of orthodontic direct-bonding cement-bracket systems as studied in vitro. , 1982, American journal of orthodontics.

[18]  R P Kusy,et al.  Coefficients of friction for arch wires in stainless steel and polycrystalline alumina bracket slots. I. The dry state. , 1990, American journal of orthodontics and dentofacial orthopedics : official publication of the American Association of Orthodontists, its constituent societies, and the American Board of Orthodontics.