Production of large-area polymer solar cells by industrial silk screen printing, lifetime considerations and lamination with polyethyleneterephthalate

Abstract The possibility of making large area (100 cm 2 ) polymer solar cells based on the conjugated polymer poly 1,4-(2-methoxy-5-ethylhexyloxy)phenylenevinylene (MEH-PPV) was demonstrated. Devices were prepared by etching an electrode pattern on ITO covered polyethyleneterephthalate (PET) substrates. A pattern of conducting silver epoxy allowing for electrical contacts to the device was silk screen printed and hardened. Subsequently a pattern of MEH-PPV was silk screen printed in registry with the ITO electrode pattern on top of the substrate. Final evaporation of an aluminum electrode or sublimation of a Buckminsterfullerene (C 60 ) layer followed by an aluminum electrode completed the device. The typical efficiency of the prototype devices consisting of three solar cells in series were 0.0046% (under AM1.5 conditions) with open-circuit voltages ( V oc ) of 0.73 V and short-circuit currents ( I sc ) of 20 μA cm −2 . The half-life based on I sc in air for the devices were 63 h. The cells were laminated in a 125 μm PET encasement. Lamination had a negative effect on the lifetime.We demonstrate the feasibility of industrial production of large area solar cells (1 m 2 ) by silk screen printing and envisage the possibility of production volumes 10000 m 2  h −1 at a cost that is on the order of 100 times lower than that of the established monocrystalline silicon solar cells in terms of materials cost.

[1]  Alan J. Heeger,et al.  Semiconducting polymers (as donors) and buckminsterfullerene (as acceptor): photoinduced electron transfer and heterojunction devices , 1993 .

[2]  R. Friend,et al.  Dye-based donor/acceptor solar cells , 2000 .

[3]  B. Hsieh,et al.  Surface modification and patterning of conjugated polymers with near‐field optical microscopy , 1996 .

[4]  C. Weder,et al.  Patterning of Oriented Photofunctional Polymer Systems Through Selective Photobleaching , 2001 .

[5]  Peter M. Martin,et al.  A new method for fabricating transparent barrier layers , 1996 .

[6]  R. Friend,et al.  Crystal network formation in organic solar cells , 2000 .

[7]  Niyazi Serdar Sariciftci,et al.  Effects of Postproduction Treatment on Plastic Solar Cells , 2003 .

[8]  R. Friend,et al.  Self-organized discotic liquid crystals for high-efficiency organic photovoltaics. , 2001, Science.

[9]  A. Alivisatos,et al.  Hybrid Nanorod-Polymer Solar Cells , 2002, Science.

[10]  Nasser N Peyghambarian,et al.  Fabrication of bulk heterojunction plastic solar cells by screen printing , 2001 .

[11]  A. Mau,et al.  Photochemical generation of conducting patterns in polybutadiene films , 1996 .

[12]  Mats Andersson,et al.  Laminated fabrication of polymeric photovoltaic diodes , 1998, Nature.

[13]  G. Hadziioannou,et al.  Organic co-evaporated films of a PPV-pentamer and C60: model systems for donor/acceptor polymer blends , 2002 .

[14]  David Braun,et al.  Semiconducting polymer‐buckminsterfullerene heterojunctions: Diodes, photodiodes, and photovoltaic cells , 1993 .

[15]  K. Müllen,et al.  Photostructuring and Consecutive Doping of an Anthracene‐Containing Polymer: A New Approach Towards Conductive Patterns , 2000 .

[16]  C. Tang.  Two‐layer organic photovoltaic cell , 1986 .

[17]  F. Krebs,et al.  High power spectrometer for the characterization of photovoltaic cells in a controlled atmosphere or vacuum , 2003 .

[18]  C. Brabec,et al.  Plastic Solar Cells , 2001 .

[19]  Alan J. Heeger,et al.  DUAL-FUNCTION SEMICONDUCTING POLYMER DEVICES : LIGHT-EMITTING AND PHOTODETECTING DIODES , 1994 .

[20]  O. Levi,et al.  A photo-oxidation mechanism for patterning and hologram formation in conjugated polymer/glass composites , 2000 .

[21]  C. Brabec,et al.  2.5% efficient organic plastic solar cells , 2001 .