Shape optimization of the ERCOFTAC centrifugal pump impeller using open-source software

This paper investigates a surrogate-based optimization technique with a genetic algorithm for fast and robust improvement of centrifugal pump performance. The optimization strategy is based only on open-source software, i.e. Scilab for the geometric parametrization, OpenFOAM for the CFD simulations and DAKOTA for the optimization. This choice aims to achieve widespread diffusion of the proposed methodology. A fully three-dimensional geometry parametrization based on Bézier surfaces is presented, allowing both the impeller and the vaned diffuser to be parametrized. Moreover, we present a comparison of different surrogate models (Kriging and artificial neural network), investigating their performance in pump optimization. We validate the proposed methodology using the ERCOFTAC centrifugal pump, because of the availability of experimental and numerical data. The results of this study demonstrate the potential of surrogate-based optimization techniques to improve the performance of centrifugal pumps.

[1]  Abdus Samad,et al.  Optimization of a Centrifugal Pump Impeller by Controlling Blade Profile Parameters , 2016 .

[2]  Raphael T. Haftka,et al.  Improving the hydrodynamic performance of diffuser vanes via shape optimization , 2007 .

[3]  Giacomo Bruno Azzurro Persico,et al.  Adjoint Method for Shape Optimization in Real-Gas Flow Applications , 2015 .

[4]  Hrvoje Jasak,et al.  OpenFOAM Turbo Tools: From General Purpose CFD to Turbomachinery Simulations , 2011 .

[5]  Antonio Ghidoni,et al.  Shape Optimization of an Organic Rankine Cycle Radial Turbine Nozzle , 2013 .

[6]  B. Chon,et al.  Application of computational fluid dynamics and surrogate-coupled evolutionary computing to enhance centrifugal-pump performance , 2016 .

[7]  Farid Bakir,et al.  Inverse Design Method for Centrifugal Impellers and Comparison with Numerical Simulation Tools , 2004 .

[8]  Zhao An,et al.  Multi-objective optimization of a low specific speed centrifugal pump using an evolutionary algorithm , 2016 .

[9]  Zhenping Feng,et al.  Multi-Objective Aerodynamic Optimization Design and Data Mining of a High Pressure Ratio Centrifugal Impeller , 2015 .

[10]  Ashkan Ojaghi,et al.  Numerical shape optimization of a centrifugal pump impeller using artificial bee colony algorithm , 2013 .

[11]  Hrvoje Jasak,et al.  Development of a Generalized Grid Mesh Interface for Turbomachinery simulations with OpenFOAM , 2008 .

[12]  Tom Verstraete,et al.  Multidisciplinary Optimization of a Radial Compressor for Microgas Turbine Applications , 2010 .

[13]  Antonio Ghidoni,et al.  Three-dimensional turbulent optimization of vaned diffusers for centrifugal compressors based on metamodel-assisted genetic algorithms , 2014 .

[14]  Motohiko Nohmi,et al.  Hydrodynamic Design System for Pumps Based on 3-D CAD, CFD, and Inverse Design Method , 2002 .

[15]  Håkan Nilsson,et al.  Numerical Investigations of Unsteady Flow in a Centrifugal Pump with a Vaned Diffuser , 2013 .

[16]  Les A. Piegl,et al.  The NURBS Book , 1995, Monographs in Visual Communication.

[17]  Andrea Cattanei,et al.  An experimental investigation of stator induced unsteadiness on centrifugal impeller outflow , 1996 .

[18]  F. Menter.  Two-equation eddy-viscosity turbulence models for engineering applications , 1994 .

[19]  Mark Richards,et al.  The surfpack software library for surrogate modeling of sparse irregularly spaced multidimensional data. , 2006 .

[20]  Ji Pei,et al.  Multi-point optimization on meridional shape of a centrifugal pump impeller for performance improvement , 2016 .

[21]  Ji Pei,et al.  Application of different surrogate models on the optimization of centrifugal pump , 2016 .

[22]  Young-Seok Choi,et al.  Design techniques to improve the performance of a centrifugal pump using CFD , 2015 .