Body-Worn Antennas Making a Splash: Lifejacket-Integrated Antennas for Global Search and Rescue Satellite System

The Cospas (Cosmicheskaya Sistyema Poiska Avariynich Sudov)-Sarsat Search-and-Rescue (SAR) satellite system provides distress alert and location data to assist rescue operations at sea, in the air, or on land. This paper summarizes the design, development, and verification for a body-worn antenna system interfaced with commercial Cospas-Sarsat personal locator beacons (PLBs), where the implemented system is integrated within an inflatable live vest. The modular approach adopted in the work allows different antenna configurations for different platforms. The electrical and mechanical requirements for antenna materials and antennas were derived from the Cospas-Sarsat system requirements, possible antenna platforms, and the maritime operational environments. The antennas were used in field tests organized in cooperation with the local Cospas-Sarsat search-and-rescue authorities. The field tests were a success. In both cases, low-earth orbit search-and-rescue (LEOSAR) satellites detected the distress signal within minutes, and accurately resolved the location. An additional detection by Geostationary Orbit Search and Rescue (GEOSAR) satellite confirmed the successful operation of the body-worn antenna system.

[1]  B. Nauwelaers,et al.  Accurate transmission line characterisation on high and low-resistivity substrates , 2001 .

[2]  Heli Jantunen,et al.  Application of Wide-Band Material Characterization Methods to Printable Electronics , 2010, IEEE Transactions on Electronics Packaging Manufacturing.

[3]  Aaas News,et al.  Book Reviews , 1893, Buffalo Medical and Surgical Journal.

[4]  Pauliina Mansikkamaki,et al.  Application of wide-band material parameter extraction techniques to printable electronics characterization , 2009, 2009 59th Electronic Components and Technology Conference.

[5]  A. Mangan,et al.  De-embedding transmission line measurements for accurate modeling of IC designs , 2006, IEEE Transactions on Electron Devices.

[6]  G. Jabbour,et al.  Inkjet Printing—Process and Its Applications , 2010, Advanced materials.

[7]  Matti Mäntysalo,et al.  Environmental protection of inkjet-printed Ag conductors , 2011 .

[8]  Hendrik Rogier,et al.  Influence of Relative Humidity on Textile Antenna Performance , 2010 .

[9]  Lauri Sydänheimo,et al.  A small planar inverted-F antenna for wearable applications , 1999, Digest of Papers. Third International Symposium on Wearable Computers.

[10]  Tiiti Kellomäki Effects of the Human Body on Single-Layer Wearable Antennas , 2012 .

[11]  A.J. Walton,et al.  Sheet resistance measurement of non-standard cleanroom materials using suspended Greek cross test structures , 2006, IEEE Transactions on Semiconductor Manufacturing.

[12]  H. Saito,et al.  Evaluation of Inkjet Technology for Electronic Packaging and System Integration , 2007, 2007 Proceedings 57th Electronic Components and Technology Conference.

[13]  P. de Maagt,et al.  Design and Manufacturing of Robust Textile Antennas for Harsh Environments , 2012, IEEE Transactions on Antennas and Propagation.

[14]  D.F. Williams,et al.  Accurate transmission line characterization , 1993, IEEE Microwave and Guided Wave Letters.

[15]  Juha Lilja,et al.  Exposing textile antennas for harsh environment , 2010, 2010 - MILCOM 2010 MILITARY COMMUNICATIONS CONFERENCE.