Multivariate controls of alluvial channel geometry: model development and applications

Alluvial channel geometry has been studied quantitatively for over one hundred years and it is now recognised to be a multi-variable problem. However, as yet there is no widespread agreement on what variables are the most important, nor is there agreement on the relationships between variables or on the form of general model. This study tests the applicability to both stable canals and natural alluvial channels of an experimental flume relationship between channel shape and boundary shear distribution. It establishes a multivariate model of downstream hydraulic geometry, showing clearly that channel geometry is generally controlled by four factors: flow discharge, channel roughness, slope and bank strength. This study makes five important contributions. Firstly, it presents a physical explanation for each of the major factors controlling channel geometry. Secondly, because it has been developed from a wide range of field observations accumulated over many years and studied in combination here, it provides a high level of prediction of channel form. Thirdly, it presents a partially quantitative description of the influence of bank strength on channel form. Vegetated and highly cohesive banks result in narrower and deeper sections while the non-vegetated and noncohesive sandy banks produce wider and shallower sections. Fourthly, it demonstrates the role that sediment transport plays in influencing channel form, finding that velocity and slope are highly dependent on sediment concentration while channel cross-section is slightly dependent. A n increase in bed-material load causes marked increase in width only when the adjustment of channel slope is severely restrained. Finally, this study finds that regime theory, threshold channel condition, channel shape relations and bivariate hydraulic geometry models provide appropriate explanation only for specific conditions and do not provide a general explanation or predictive model for channel geometry.

[1]  Manning,et al.  A CONTRIBUTION TO REGIME THEORY RELATING PRINCIPALLY TO CHANNEL GEOMETRY. , 1980 .

[2]  E. Andrews.  Bed-material entrainment and hydraulic geometry of gravel-bed rivers in Colorado , 1984 .

[3]  Gregorio G. Vigilar,et al.  Hydraulic Geometry of Threshold Channels , 1992 .

[4]  G. Griffiths.  Extremal Hypotheses for River Regime: An Illusion of Progress , 1984 .

[5]  S. Ikeda,et al.  STABLE CHANNEL CROSS SECTIONS OF STRAIGHT SAND RIVERS , 1991 .

[6]  Howard H. Chang.  Minimum stream power and river channel patterns , 1979 .

[7]  J. L. Ternan,et al.  The impact of afforestation on stream bank erosion and channel form , 1983 .

[8]  John F. Kennedy,et al.  Menu of Coupled Velocity and Sediment‐Discharge Relations for Rivers , 1990 .

[9]  Daryl B. Simons,et al.  Sediment transport technology , 1977 .

[10]  S. Schumm,et al.  Experimental Study of Channel Patterns , 1971, Nature.

[11]  R. Bagnold.  An approach to the sediment transport problem from general physics , 1966 .

[12]  S. Ikeda,et al.  Width and depth of self‐formed straight gravel rivers with bank vegetation , 1990 .

[13]  D. Knighton.  Fluvial forms and processes , 1984 .

[14]  C. Inglis,et al.  MARITIME PAPER NO. 38: THE REGIMEN OF THE THAMES ESTUARY AS AFFECTED BY CURRENTS, SALINITIES, AND RIVER FLOW. , 1957 .

[15]  B. Rhoads.  A Continuously Varying Parameter Model of Downstream Hydraulic Geometry , 1991 .

[16]  Wr White,et al.  THE FRICTIONAL CHARACTERISTICS OF ALLUVIAL STREAMS: A NEW APPROACH. , 1980 .

[17]  Donald W. Knight,et al.  Boundary Shear in Smooth Rectangular Ducts , 1985 .

[18]  G. Lacey.  UNIFORM FLOW IN ALLUVIAL RIVERS AND CANALS. (INCLUDES APPENDICES). , 1934 .

[19]  M. Wolman.  The natural channel of Brandywine Creek, Pennsylvania , 1955 .

[20]  S N Ghosh,et al.  BOUNDARY SHEAR DISTRIBUTION IN OPEN CHANNEL FLOW , 1970 .

[21]  Leo C. van Rijn,et al.  Equivalent Roughness of Alluvial Bed , 1982 .

[22]  Tractive-Force Distribution in Open Channels , 1966 .

[23]  Donald W. Knight,et al.  Distribution of Shear Force on Boundary of Smooth Rectangular Duct , 1994 .

[24]  Ian Proudman,et al.  Boundary Layer Theory (fourth edition). By H. SCHLICHTINO. New York: McGraw-Hill, 1960. 647 pp. £6. 8s. , 1962, Journal of Fluid Mechanics.

[25]  D. Rhodes.  The b-f-m Diagram for Downstream Hydraulic Geometry , 1978 .

[26]  C. Yang.  Incipient Motion and Sediment Transport , 1973 .

[27]  J. F. Friedkin,et al.  A laboratory study of the meandering of alluvial rivers , 1945 .

[28]  C. F. Nordin.  Aspects of flow resistance and sediment transport, Rio Grande near Bernalillo, New Mexico , 1964 .

[29]  M. Gordon Wolman,et al.  Factors controlling the size and shape of stream channels in coarse noncohesive sands , 1961 .

[30]  J Stebbings,et al.  THE SHAPES OF SELF-FORMED MODEL ALLUVIAL CHANNELS. , 1963 .

[31]  E. W. Lane.  Stable Channels in Erodible Materials , 1937 .

[32]  Chih Ted Yang,et al.  Potential Energy and Stream Morphology , 1971 .

[33]  William Robert Brownlie,et al.  Prediction of flow depth and sediment discharge in open channels , 1982 .

[34]  G Lacey,et al.  A GENERAL THEORY OF FLOW IN ALLUVIUM. , 1946 .

[35]  Howard H. Chang.  Analysis of River Meanders , 1984 .

[36]  D. Dunkerley.  CHANNEL GEOMETRY, BED MATERIAL, AND INFERRED FLOW CONDITIONS IN EPHEMERAL STREAM SYSTEMS, BARRIER RANGE, WESTERN N.S.W. AUSTRALIA , 1992 .

[37]  L. B. Leopold,et al.  River flood plains: Some observations on their formation , 1957 .

[38]  G. Parker,et al.  Stable width and depth of straight gravel rivers with heterogeneous bed materials , 1988 .

[39]  S. Schumm,et al.  The Variability of Large Alluvial Rivers , 1994 .

[40]  G. Nanson,et al.  Downstream reduction of rural channel size with contrasting urban effects in small coastal streams of southeastern Australia , 1981 .

[41]  A. David Knighton.  Variation in Width-Discharge Relation and Some Implications for Hydraulic Geometry , 1974 .

[42]  R. Millar,et al.  Effect of Bank Stability on Geometry of Gravel Rivers , 1993 .

[43]  A. J. Sutherland,et al.  Extremal hypotheses for river behavior , 1983 .

[44]  M. Church,et al.  An assessment of bed load sediment transport formulae for gravel bed rivers , 1989 .

[45]  Hsin-Kuan Liu.  Closure of "Mechanics of Sediment-Ripple Formation" , 1958 .

[46]  Thomas Blench,et al.  Closure of "Regime Theory for Self-Formed Sediment-Bearing Channels" , 1951 .

[47]  S. Schumm.  The shape of alluvial channels in relation to sediment type , 1960 .

[48]  L. B. Leopold,et al.  The hydraulic geometry of stream channels and some physiographic implications , 1953 .

[49]  K. Richards.  Channel and flow geometry , 1977 .

[50]  V. T. Chow.  Open-channel hydraulics , 1959 .

[51]  Daryl B. Simons,et al.  Morphology of Cobble Streams in Small Watersheds , 1976 .

[52]  Stanley A. Schumm,et al.  Sinuosity of Alluvial Rivers on the Great Plains , 1963 .

[53]  H. Barnes.  Roughness characteristics of natural channels , 1967 .

[54]  A. Lamberti.  Dynamic and Variational Approaches to the River Regime Relation , 1992 .

[55]  B. Rhoads.  Statistical models of fluvial systems , 1992 .

[56]  Chih Ted Yang,et al.  Sediment Transport and Unit Stream Power Function , 1982 .

[57]  William R. Brownlie,et al.  Re-Examination of Nikuradse Roughness Data , 1981 .

[58]  Terence R. Smith.  A Derivation of the Hydraulic Geometry of Steady-State Channels from Conservation Principles and Sediment Transport Laws , 1974, The Journal of Geology.

[59]  Maurice L. Albertson,et al.  Uniform Water Conveyance Channels in Alluvial Materials , 1960 .

[60]  F. Kolberg,et al.  Active Channel Geometry and Discharge Relations of U.S. Piedmont and Midwestern Streams: The Variable Exponent Model Revisited , 1995 .

[61]  G. Parker.  Self-formed straight rivers with equilibrium banks and mobile bed. Part 1. The sand-silt river , 1978, Journal of Fluid Mechanics.

[62]  C. R. Neill,et al.  Note On Initial Movement Of Coarse Uniform Bed-Material , 1968 .

[63]  Thomas Blench,et al.  Regime behaviour of canals and rivers , 1957 .

[64]  Donald W. Knight,et al.  Boundary Shear in Smooth and Rough Channels , 1981 .

[65]  C. M. White.  The equilibrium of grains on the bed of a stream , 1940, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[66]  S. V. Chitale.  Coordination of Empirical and Rational Alluvial Canal Formulas , 1996 .

[67]  S. V. Chitale.  Comparison of Width and Friction Factor Predictors and Implications , 1995 .

[68]  C. Hupp,et al.  Riparian vegetation and fluvial geomorphic processes , 1996 .

[69]  C. Yang.  Unit Stream Power Equation for Gravel , 1984 .

[70]  B. Dischler.  Classification and Analysis of NMR Spectra , 1966 .

[71]  R. Müller,et al.  Formulas for Bed-Load transport , 1948 .

[72]  J. Thornes.  The Hydraulic Geometry of Stream Channels in the Xingu-Araguaia Headwaters , 1970 .

[73]  E. J. Hickin,et al.  Lateral Migration Rates of River Bends , 1984 .

[74]  Rolf Kellerhals,et al.  Stable Channels with Gravel-Paved Beds , 1967 .

[75]  Yafei Jia.  Minimum froude number and the equilibrium of alluvial sand rivers , 1990 .

[76]  R. Bagnold.  Bed load transport by natural rivers , 1977 .

[77]  M. Shahjahan.  FACTORS CONTROLLING THE GEOMETRY OF FLUVIAL MEANDERS , 1970 .

[78]  Xxyyzz.  Relationships Between Morphology of Small Streams and Sediment Yield , 1982 .

[79]  B. Sellwood.  Rivers: Form and process in alluvial channels: Keith Richards. Methuen, London, 1982, xi + 358 pp., £stg. 16.00 (cloth), £stg. 8.50 (paperback) , 1987 .

[80]  Siow-Yong Lim,et al.  Boundary shear stress distributions in smooth rectangular open channel flows , 1998 .

[81]  W. Marcus.  Experimental fluvial geomorphology , 1990 .

[82]  E. W. Lane.  The Importance of Fluvial Morphology in Hydraulic Engineering , 1955 .

[83]  D. Wilcock.  Investigation into the Relations between Bedload Transport and Channel Shape , 1971 .

[84]  F. Bretherton,et al.  Stability and the conservation of mass in drainage basin evolution , 1972 .

[85]  C. Thorne,et al.  Stable Channels with Mobile Gravel Beds , 1986 .

[86]  G Lacey,et al.  FLOW IN ALLUVIAL CHANNELS WITH SANDY MOBILE BEDS. , 1958 .

[87]  J. Pizzuto.  The morphology of graded gravel rivers: a network perspective , 1992 .

[88]  P. Diplas.  Characteristics of Self‐Formed Straight Channels , 1990 .

[89]  M. Gordon Wolman,et al.  Factors Influencing Erosion of a Cohesive River Bank , 1959, American Journal of Science.

[90]  W. White,et al.  Analytical Approach to River Regime , 1982 .

[91]  C. Yang,et al.  Comparisons of Selected Bed‐Material Load Formulas , 1991 .

[92]  C. Neill,et al.  Systematic Evaluation of River Regime , 1967 .

[93]  Peter Ackers,et al.  Sediment Transport: New Approach and Analysis , 1973 .

[94]  Hunter Rouse,et al.  Advanced mechanics of fluids , 1965 .

[95]  T. K. Miller.  A SYSTEM MODEL OF STREAM-CHANNEL SHAPE AND SIZE , 1984 .

[96]  D I H Barr,et al.  A SIMILITUDE FRAMEWORK OF REGIME THEORY. , 1968 .

[97]  Hans J. Leutheusser,et al.  DISTRIBUTION OF TRACTIVE FORCE IN OPEN CHANNELS , 1970 .

[98]  G Lacey,et al.  STABLE CHANNELS IN ALLUVIUM (INCLUDES APPENDICES). , 1930 .

[99]  H. Einstein,et al.  The Bed-Load Function for Sediment Transportation in Open Channel Flows , 1950 .

[100]  E. J. Hickin,et al.  VEGETATION AND RIVER CHANNEL DYNAMICS , 1984 .

[101]  M. Selim Yalin,et al.  Mechanics of sediment transport , 1972 .

[102]  R. Hey.  DETERMINATE HYDRAULIC GEOMETRY OF RIVER CHANNELS , 1978 .

[103]  H. A. Einstein,et al.  Formulas for the Transportation of Bed Load , 1942 .

[104]  Chris C. Park.  World-wide variations in hydraulic geometry exponents of stream channels: An analysis and some observations , 1977 .

[105]  Derald G. Smith,et al.  Effect of vegetation on lateral migration of anastomosed channels of a glacier meltwater river , 1976 .

[106]  R. Bagnold.  An empirical correlation of bedload transport rates in flumes and natural rivers , 1980, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.

[107]  P. Ackers,et al.  SEDIMENT TRANSPORT THEORIES. , 1975 .

[108]  E. W. Lane.  Design of Stable Channels , 1955 .

[109]  F. Henderson.  Stability of Alluvial Channels , 1961 .

[110]  C. Hupp,et al.  Bank accretion and the development of vegetated depositional surfaces along modified alluvial channels , 1991 .

[111]  Chih Ted Yang,et al.  Formation of Riffles and Pools , 1971 .

[112]  G. Nanson,et al.  The West Dapto flood of February 1984: rainfall characteristics and channel changes , 1985 .

[113]  P. Ackers,et al.  1992 GERALD LACEY MEMORIAL LECTURE. CANAL AND RIVER REGIME IN THEORY AND PRACTICE: 1929-92. , 1992 .

[114]  Nicholas J. Clifford,et al.  Classics in physical geography revisited , 1996 .

[115]  Mike Barbetti,et al.  River stabilisation due to changing climate and vegetation during the late Quaternary in western Tasmania, Australia , 1995 .

[116]  S. Riley.  The channel shape—grain size relation in eastern Australia and some paleohydrologic implications , 1975 .

[117]  A. A. Kalinske,et al.  Movement of sediment as bed load in rivers , 1947 .

[118]  M. Wolman,et al.  Magnitude and Frequency of Forces in Geomorphic Processes , 1960, The Journal of Geology.

[119]  D. Pianese,et al.  Are Extremal Hypotheses Not Consistent with Regime Alluvial Channels , 1992 .

[120]  Donald W. Knight,et al.  River Flow Simulation: Research and Developments , 1990 .

[121]  Luna Bergere Leopold,et al.  The concept of entropy in landscape evolution , 1962 .

[122]  M. A. Carson,et al.  Closure of "Influence of Channel Width on Bed Load Transport Capacity" , 1987 .

[123]  Donald W. Knight,et al.  Boundary Shear in Smooth Rectangular Channels , 1984 .

[124]  Howard H. Chang.  River Channel Changes: Adjustments of Equilibrium , 1986 .

[125]  Thomas Blench,et al.  Regime Theory Design of Canals with Sand Beds , 1970 .

[126]  L. Brush.  Drainage basins, channels, and flow characteristics of selected streams in central Pennsylvania , 1961 .

[127]  George A. Griffiths,et al.  Flow Resistance in Coarse Gravel Bed Rivers , 1981 .