论文信息 - Effects of segmented shield wires on switching transient overvoltage study

Effects of segmented shield wires on switching transient overvoltage study

Shield wire segmentation is an effective method for reducing transmission line power losses. This paper presents a comparison of simulation results of a switching transient overvoltage study on transmission lines with segmented shield wires versus traditional continuous shield wires for a typical 500-kV transmission line. The difference in overvoltage is analyzed by the high frequency characteristic of the transient overvoltage.

G. A. Franklin | Shanshan Yang

[1] J. A. Brandão Faria. Broadband resonance effects in power lines with sectionalized shield wires , 1990, IEEE Proceedings on Southeastcon.

[2] A. J. F. Keri,et al. The Open Loop Scheme: An Effective Method of Ground Wire Loss Reduction , 1984, IEEE Transactions on Power Apparatus and Systems.

[3] Gregory A. Franklin,et al. Modeling of overhead transmission lines with segmented shield wires for signal attenuation calculation in power line carrier systems , 2011, 2011 Proceedings of IEEE Southeastcon.

[4] A. M. Gole,et al. Modeling Guidelines for Switching Transients Report Prepared by the Switching Transients Task Force of the IEEE Modeling and Analysis of System Transients Working Group , 1998 .