Investigation of influences of various losses on electromagnetic torque for surface-mounted permanent magnet synchronous motors

Traditionally, vector controlled permanent magnet synchronous motor (PMSM) drives have been performed under the assumption that there is no iron loss, mechanical loss, and stray loss in motors. However, influences of these losses on the vector controlled PMSM drive are hardly evaluated so far. Thus, there is a need to investigate the influences in order to evaluate whether these losses can be neglected. This paper investigates the influences of the iron loss, mechanical loss, and stray loss on surface-mounted PMSM drives. In the first phase, a formulation of the electromagnetic torque taking the various losses into account are developed. In the second phase, the influences of the various losses on the electromagnetic torque under vector control strategy are investigated based on the developed mathematical model. These influences are confirmed by experimental results for torque control of a tested 160 W surface-mounted PMSM.

[1]  Tomonobu Senjyu,et al.  Modeling and vector control of synchronous reluctance motors including stator iron loss , 1994 .

[2]  Seung-Ki Sul,et al.  Highly dynamic torque control of synchronous reluctance motor , 1996, PESC Record. 27th Annual IEEE Power Electronics Specialists Conference.

[3]  Emil Levi,et al.  Iron loss in rotor-flux-oriented induction machines: identification, assessment of detuning, and compensation , 1996 .

[4]  Michele Pastorelli,et al.  Flux-observer-based high-performance control of synchronous reluctance motors by including cross saturation , 1999 .

[5]  L. Xu,et al.  A compensated vector control scheme of a synchronous reluctance motor including saturation and iron losses , 1991, Conference Record of the 1991 IEEE Industry Applications Society Annual Meeting.

[6]  Seung-Ki Sul,et al.  Efficiency-optimized direct torque control of synchronous reluctance motor using feedback linearization , 1999, IEEE Trans. Ind. Electron..

[7]  Tomonobu Senjyu,et al.  Vector control of synchronous permanent magnet motors including stator iron loss , 1995, Proceedings of 1995 International Conference on Power Electronics and Drive Systems. PEDS 95.

[8]  Emil Levi.  Impact of iron loss on behaviour of vector controlled induction machines , 1994 .

[9]  Kwanghee Nam,et al.  A vector control scheme for EV induction motors with a series iron loss model , 1998, IEEE Trans. Ind. Electron..

[10]  Takayuki Mizuno,et al.  Decoupling Control Method of Induction Motor Taking Stator Core Loss into Consideration , 1989 .

[11]  Shigeo Morimoto,et al.  Loss minimization control of permanent magnet synchronous motor drives , 1994, IEEE Trans. Ind. Electron..

[12]  Tomonobu Senjyu,et al.  An accurate modeling for permanent magnet synchronous motor drives , 2000, APEC 2000. Fifteenth Annual IEEE Applied Power Electronics Conference and Exposition (Cat. No.00CH37058).

[13]  X. Xu,et al.  Vector control of a synchronous reluctance motor including saturation and iron loss , 1990, Conference Record of the 1990 IEEE Industry Applications Society Annual Meeting.