A dynamic approach for faster performance measurements on hydraulic turbomachinery model testing

During the design and optimization of hydraulic turbomachines, the experimental evaluation of hydraulic performances beyond the best efficiency point and for off-design conditions remains essential to validate the simulation process and to finalize the development. In this context, an alternative faster method to measure the efficiency of hydraulic turbomachines using a dynamic approach has been investigated. The so-called “sliding-gate” dynamic measurement method has been adapted and implemented on the hydraulic test rig of the HES-SO Valais//Wallis, Sion, Switzerland. This alternative approach, particularly gainful for small-hydro for which the investment devoted to development is limited, has been successfully assessed on two cases for drinking water networks energy recovery. A 2.65 kW double-regulated laboratory prototype of a tubular axial micro-turbine with two independent variable speed counter-rotating runners and a 11 kW multi-stage centrifugal pump-as-turbine (PAT) with variable speed have been selected. The hydraulic efficiency results obtained by dynamic measurements are compared to the ones obtained by the classical steady point-by-point method. This dynamic method, suitable not only for hydraulic machinery, allows: (i) reducing significantly (up to 10×) the time necessary to draw the complete efficiency characteristics of a hydraulic machine; (ii) rapidly detecting the hydrodynamic instabilities within the operating range of the machine.

[1]  Charles W. Almquist,et al.  The Sliding Gate Method for Hydroturbine Efficiency Testing , 1995 .

[2]  Vlad Hasmatuchi,et al.  Hydrodynamics of a Pump-Turbine Operating at Off-Design Conditions in Generating Mode: Experimental Investigation , 2011 .

[3]  Cécile Münch-Alligné,et al.  Exploitation du potentiel de la petite hydraulique , 2013 .

[4]  François Avellan,et al.  Numerical Simulations of a Counter-Rotating Micro-Turbine , 2014 .

[5]  Charles W. Almquist,et al.  The sliding gate method: A better way of turbine efficiency testing? , 1997 .

[6]  Thomas Staubli,et al.  INDEX TESTS OF A FRANCIS UNIT USING THE SLIDING GATE METHOD , 2008 .

[7]  Keith Alexander,et al.  Axial-flow turbines for low head microhydro systems. , 2009 .

[8]  D. Biner,et al.  Design & performance of a hydraulic micro-turbine with counter-rotating runners , 2015, 2015 5th International Youth Conference on Energy (IYCE).

[9]  D. Melly,et al.  Development of a PM-generator for a counter-rotating micro-hydro turbine , 2014, 2014 International Conference on Electrical Machines (ICEM).

[10]  Fernando Casanova,et al.  Failure analysis of the draft tube connecting bolts of a Francis-type hydroelectric power plant , 2009 .

[11]  Shahram Derakhshan,et al.  Experimental study of characteristic curves of centrifugal pumps working as turbines in different specific speeds , 2008 .

[12]  Helena M. Ramos,et al.  Pumps as turbines: an unconventional solution to energy production , 1999 .

[13]  Toru Shigemitsu,et al.  Study on Contra-Rotating Small-Sized Axial Flow Hydro Turbine , 2012 .

[14]  Alin Bosioc,et al.  On the Dynamic Measurements of Hydraulic Characteristics , 2016 .

[15]  Thierry Jacob,et al.  Francis Turbine Surge: Discussion and Data Base , 1996 .

[16]  Bryan Orchard,et al.  Pumps as turbines for water industry , 2009 .

[17]  François Avellan,et al.  Engineering & Performance of DuoTurbo: Microturbine with Counter-Rotating Runners , 2016 .

[18]  A. A. Williams.  Pumps as turbines for low cost micro hydro power , 1996 .

[19]  V. Hasmatuchi,et al.  Experimental Assessment of a New Kinetic Turbine Performance for Artificial Channels , 2018 .

[20]  François Avellan,et al.  Hydraulic performance evaluation of a micro-turbine with counter rotating runners by experimental investigation and numerical simulation , 2018, Renewable Energy.

[21]  Ruprecht.  Parallel Computation of Stator-Rotor Interaction in an Axial Turbine , 2000 .

[22]  Anton Schleiss,et al.  Experimental characterization of a five blade tubular propeller turbine for pipe inline installation , 2016 .

[23]  Sanjay V. Jain,et al.  Cost Analysis of Pump as Turbine for Pico Hydropower Plants – A Case Study☆ , 2013 .