Experimental and theoretical study of the lateral compression process on the empty and foam-filled hexagonal columns

Abstract In this article, a new analytical model of plastic deformation during the flattening process on hexagonal metal columns under the lateral loading in the quasi-static condition is presented. Based on the introduced model, some theoretical relations are derived to forecast the average and instantaneous lateral load of the hexagonal column in two different conditions: empty and polyurethane foam-filled. Then, some lateral compression tests were carried out on the empty and foam-filled metal columns and the experimental results were compared with the theoretical predictions by the present formulas that showed an admissible correlation. The theoretical relations estimate variations of the lateral load in terms of lateral displacement. The theoretical analysis shows that the lateral load on the hexagonal column during the flattening process is dependent on the column wall thickness, column length, and material properties of the column and polyurethane foam-filler. Finally, the effects of geometrical characteristics of the hexagonal columns and material properties of the columns and foams on the lateral load are investigated, experimentally.

[1]  H. Abbas,et al.  Lateral collapse of composite cylindrical tubes between flat platens , 2000 .

[3]  G. Liaghat,et al.  Theoretical and experimental study on empty and foam-filled columns with square and rectangular cross section under axial compression , 2012 .

[4]  Abbas Niknejad,et al.  Experimental and Theoretical Investigation of the First Fold Creation in Thin Walled Columns , 2010 .

[5]  Abdul-Ghani Olabi,et al.  Analysis of nested tube type energy absorbers with different indenters and exterior constraints , 2006 .

[6]  Bin Wang,et al.  Effects of defects on the in-plane dynamic crushing of metal honeycombs , 2010 .

[7]  H. Kavi,et al.  Predicting energy absorption in a foam-filled thin-walled aluminum tube based on experimentally determined strengthening coefficient , 2006 .

[8]  Abbas Niknejad,et al.  Theoretical and experimental studies of the instantaneous folding force of the polyurethane foam-filled square honeycombs , 2011 .

[9]  Michael D. Gilchrist,et al.  Optimised design of nested oblong tube energy absorbers under lateral impact loading , 2008 .

[10]  Hany El Kadi,et al.  Crushing behavior of laterally compressed composite elliptical tubes: Experiments and predictions using artificial neural networks , 2008 .

[11]  Qing Li,et al.  Optimization of foam-filled bitubal structures for crashworthiness criteria , 2012 .

[12]  Stephen R Reid,et al.  Effect of strain hardening on the lateral compression of tubes between rigid plates , 1978 .

[13]  Tadaharu Adachi,et al.  In-plane impact behavior of honeycomb structures randomly filled with rigid inclusions , 2009 .

[14]  Stelios Kyriakides,et al.  On the axisymmetric progressive crushing of circular tubes under axial compression , 2003 .

[15]  Tongxi Yu,et al.  Energy absorption in splitting square metal tubes , 2002 .

[16]  Wei Li,et al.  Crashworthiness design for foam filled thin-wall structures , 2009 .

[17]  G. Liaghat,et al.  Experimental investigation on the lateral compression in the foam-filled circular tubes , 2012 .

[18]  Daw-Kwei Leu.  Finite-element simulation of the lateral compression of aluminium tube between rigid plates , 1999 .

[19]  Yoshiaki Yasui,et al.  Dynamic axial crushing of multi-layer honeycomb panels and impact tensile behavior of the component members , 2000 .

[20]  Abdel Magid Hamouda,et al.  Energy absorption capability of composite hexagonal ring systems , 2012 .

[21]  G. S. Sekhon,et al.  Study of lateral compression of round metallic tubes , 2005 .

[22]  Mahmoud Nemat-Alla,et al.  Reproducing hoop stress–strain behavior for tubular material using lateral compression test , 2003 .

[23]  G. S. Sekhon,et al.  A study of lateral collapse of square and rectangular metallic tubes , 2001 .

[24]  T. Wierzbicki,et al.  Experimental and numerical studies of foam-filled sections , 2000 .

[25]  Abbas Niknejad,et al.  Prediction of the mean folding force during the axial compression in foam-filled grooved tubes by theoretical analysis , 2012 .

[26]  Abdel Magid Hamouda,et al.  Quasi-static axial and lateral crushing of radial corrugated composite tubes , 2008 .