Effect of serpentine flow-field designs on performance of PEMFC stacks for micro-CHP systems

Serpentine flow-fields are widely used for polymer electrolyte membrane (PEM) fuel cells due to effective water removal. In this study, the effects of serpentine flow-field designs on the performance of a commercial-scale PEM fuel cell stack for micro-CHP (Combined Heat & Power) systems, which use reformed gas as fuel, are investigated by performing both computational fluid dynamics (CFD) simulations and experimental measurements. First, we design four different serpentine flow-fields in which the total channel area (defined as open channel area in this study) of a flow-field plate is altered without changing other design parameters such as the channel cross-sectional area and the channel length. Then, CFD simulations and experimental measurements are performed to assess the performance of each flow-field design. The CFD simulation results show that the current density distributions and average current densities are very insensitive to the open channel area. Thus, the information from the simulations is not sufficient to judge whether the open channel area affects the performance of a PEM fuel cell. On the other hand, the experimental measurements indicate that the performances of four fuel cell stacks, each with one of the four flow-field designs used in the simulations, are considerably different. Increasing the open channel area of a serpentine flow-field improves the performance of the PEM fuel cell up to a certain extent.

[1]  Xavier Cordobes Adroher,et al.  Ex situ and modeling study of two-phase flow in a single channel of polymer electrolyte membrane fue , 2011 .

[2]  Bing Wu,et al.  Current density distribution in PEFC , 2005 .

[3]  Tero Hottinen,et al.  Inhomogeneous compression of PEMFC gas diffusion layer: Part I. Experimental , 2007 .

[4]  Xianguo Li,et al.  Cross-leakage flow between adjacent flow channels in PEM fuel cells , 2006 .

[5]  Xianguo Li,et al.  Review of bipolar plates in PEM fuel cells: Flow-field designs , 2005 .

[6]  Sirivatch Shimpalee,et al.  Numerical studies on rib & channel dimension of flow-field on PEMFC performance , 2007 .

[7]  Ching-Han Huang,et al.  Analyses of the fuel cell stack assembly pressure , 2005 .

[8]  Yosuke Matsukuma,et al.  Examination of optimal separator shape of polymer electrolyte fuel cell with numerical analysis including the effect of gas flow through gas diffusion layer , 2006 .

[9]  D. Wilkinson,et al.  A critical review of two-phase flow in gas flow channels of proton exchange membrane fuel cells , 2010 .

[10]  Chaoyang Wang,et al.  Two-Phase Modeling and Flooding Prediction of Polymer Electrolyte Fuel Cells , 2005 .

[11]  Won-Yong Lee,et al.  Current distribution in a single cell of PEMFC , 2003 .

[12]  Chao-Yang Wang,et al.  In Situ Current Distribution Measurements in Polymer Electrolyte Fuel Cells , 2003 .

[13]  Maher A.R. Sadiq Al-Baghdadi,et al.  A CFD study of hygro–thermal stresses distribution in PEM fuel cell during regular cell operation , 2009 .

[14]  Werner Lehnert,et al.  Investigation on the influence of channel geometries on PEMFC performance , 2006 .

[15]  Jiujun Zhang,et al.  A review of water flooding issues in the proton exchange membrane fuel cell , 2008 .

[16]  Gen Inoue,et al.  Effect of gas channel depth on current density distribution of polymer electrolyte fuel cell by numerical analysis including gas flow through gas diffusion layer , 2006 .

[17]  Hyunchul Ju,et al.  Experimental Validation of a PEM Fuel Cell Model by Current Distribution Data , 2004 .

[18]  S. Dutta,et al.  Numerical prediction of mass-exchange between cathode and anode channels in a PEM fuel cell , 2001 .

[19]  Chang-Soo Kim,et al.  Effects of channel configurations of flow field plates on the performance of a PEMFC , 2004 .

[20]  Ramin Roshandel,et al.  The effect of fuel cell operational conditions on the water content distribution in the polymer electrolyte membrane , 2011 .