Long-term carbonation resistance of concrete under initial high-temperature curing

[1]  A. Ramezanianpour,et al.  Effect of steam curing cycles on strength and durability of SCC: A case study in precast concrete , 2013 .

[2]  S. Aleem,et al.  Physico-chemical and mechanical characteristics of pozzolanic cement pastes and mortars hydrated at different curing temperatures , 2012 .

[3]  B. B. Das,et al.  Influence of Fineness of Fly Ash on the Carbonation and Electrical Conductivity of Concrete , 2011 .

[4]  Guo Li,et al.  Studies about the Initial Curing Conditions on the Carbonation Resistance of Fly-Ash Concrete , 2011 .

[5]  Y. Peiyu.  Effect of high temperature curing on hydration degree and micro-morphology of complex binders , 2010 .

[6]  Abid Nadeem,et al.  The effect of high temperature curing on the strength and carbonation of pozzolanic structural lightweight concretes , 2009 .

[7]  Hu Shu-guang.  Carbonation of Steam-cured High Strength Concrete and the Prediction Model of Carbonation Depth , 2009 .

[8]  O. Kayali,et al.  Long-term strength and durability parameters of lightweight concrete in hot regime: importance of initial curing , 2007 .

[9]  Halit Yazıcı,et al.  The effect of curing conditions on compressive strength of ultra high strength concrete with high volume mineral admixtures , 2007 .

[10]  L. Tao.  Effect of High Temperature Curing on Compressive Strength of Concrete , 2006 .

[11]  R. D. Hooton,et al.  Chloride resistance of high-performance concretes subjected to accelerated curing , 2004 .

[12]  J. G. Cabrera,et al.  Effects of initial curing condition on the fluid transport properties in OPC and fly ash blended cement concrete , 2004 .

[13]  J. Sharp,et al.  The microstructure and mechanical properties of blended cements hydrated at various temperatures , 2001 .

[14]  R. V. Balendran,et al.  The influence of high temperature curing on the compressive, tensile and flexural strength of pulverized fuel ash concrete , 2000 .

[15]  Surendra P. Shah,et al.  Effects of curing conditions on properties of concrete using slag replacement , 2000 .

[16]  H. Toutanji,et al.  Effect of curing procedures on properties of silica fume concrete , 1999 .

[17]  J.-K. Kim,et al.  Compressive strength development of concrete with different curing time and temperature , 1998 .

[18]  Ben C. Gerwick,et al.  Cracking-Corrosion Interaction inConcrete Exposed to Marine Environment , 1982 .