论文信息 - Incomplete Frictional Flat-Ended Punch on Half-Plane with Edge Crack

Incomplete Frictional Flat-Ended Punch on Half-Plane with Edge Crack

Flat-ended or wedge-shaped rigid punch problem is considered in this paper. The punch is with one end sliding and the other end with a sharp corner coming into a half-plane. The model of the punch is that the flat-end punch is inclined by an angle e or the wedge-shaped punch with e is pushed vertically. A crack is assumed to be initiated from the end with the corner, and Coulomb's frictional force exists on the contact region. The general solution of the problem is derived in an analytical way, and the relation among the vertical load on the punch, rotating angle of the punch, and the contact length is found. Stress intensity factors of the edge crack are calculated in different cases. The resultant moments at the origin of the coordinates are also calculated, which can be used to decide the position of the vertical force on the punch.

[1] I. Bakirtas. The contact problem of an orthotropic non-homogeneous elastic half space , 1984 .

[2] L. Keer,et al. Smooth indentation of an isotropic cantilever beam , 1986 .

[3] C. Hwu,et al. Punch Problems for an Anisotropic Elastic Half-Plane , 1996 .

[4] Norio Hasebe,et al. Bonded Bi-material Half-Planes With Semi-elliptical Notch Under Tension Along the Interface , 1992 .

[5] Iida Jiro,et al. A crack originating from a triangular notch on a rim of a semi-infinite plate , 1978 .

[6] L. Keer,et al. Smooth indentation of a transversely isotropic cantilever beam , 1986 .

[7] Norio Hasebe,et al. Frictional Punch and Crack in Plane Elasticity , 1989 .

[8] I. Bakirtas. The problem of a rigid punch on a non-homogeneous elastic half space , 1980 .

[9] N. Hasebe,et al. Stress analysis of a semi-infinite plate with an oblique edge crack , 1980 .

[10] K. Johnson. Contact Mechanics: Frontmatter , 1985 .

[11] Norio Hasebe,et al. Analysis of the Second Mixed Boundary Value Problem for a Thin Plate , 1994 .

[12] Norio Hasebe,et al. Crack due to Wedge‐Shaped Punch with Friction , 1990 .

[13] G. C. Sih,et al. Complex variable methods in elasticity , 1971 .

[14] D. Hills,et al. On the mechanics of fretting fatigue , 1988 .

[15] V. I. Fabrikant,et al. Flat punch of arbitrary shape on an elastic half-space , 1986 .

[16] Leon M Keer,et al. Contact Stress Analysis of a Layered Transversely Isotropic Half-Space , 1992 .