Definition and determination of the minimum uncut chip thickness of microcutting

[1]  Vijay K. Jain,et al.  Fabrication of micro-features and micro-tools using electrochemical micromachining , 2012 .

[2]  P. Withers,et al.  Evaluation of surface integrity in micro drilling process for nickel-based superalloy , 2011 .

[3]  S. Kasman,et al.  Investigation of micro-milling process parameters for surface roughness and milling depth , 2011 .

[4]  H. H. Langen,et al.  Design of micro square endmills for hard milling applications , 2011 .

[5]  Zhanqiang Liu,et al.  Influence of cutting speed on surface integrity for powder metallurgy nickel-based superalloy FGH95 , 2011 .

[6]  S. C. Veldhuis,et al.  Investigations of White Layer Formation During Machining of Powder Metallurgical Ni-Based ME 16 Superalloy , 2010 .

[7]  Joaquim Ciurana,et al.  An experimental analysis of process parameters to manufacture metallic micro-channels by micro-milling , 2010 .

[8]  Jiwang Yan,et al.  Fabricating micro-structured surface by using single-crystalline diamond endmill , 2010 .

[9]  Zhanqiang Liu,et al.  Experimental Research in High Efficiency Milling of Powder Metallurgy Superalloy , 2010, 2010 International Conference on Measuring Technology and Mechatronics Automation.

[10]  Paul Mativenga,et al.  Size effect and tool geometry in micromilling of tool steel , 2009 .

[11]  M. Ali,et al.  Investigation of machining parameters for the multiple-response optimization of micro electrodischarge milling , 2009 .

[12]  Zhanqiang Liu,et al.  Determination of Minimum Uncut Chip Thickness in Micromachining , 2009 .

[13]  Steven Y. Liang,et al.  Predictive modeling of transition undeformed chip thickness in ductile-regime micro-machining of single crystal brittle materials , 2009 .

[14]  Hamid Reza Karimi,et al.  Mathematical model of micro turning process , 2009 .

[15]  Tuğrul Özel,et al.  Process simulations for 3D turning using uniform and variable microgeometry PCBN tools , 2008 .

[16]  Jürgen Fleischer,et al.  INVESTIGATION OF SIZE-EFFECTS IN MACHINING WITH GEOMETRICALLY DEFINED CUTTING EDGES , 2007 .

[17]  Richard E. DeVor,et al.  An Analytical Model for the Prediction of Minimum Chip Thickness in Micromachining , 2006 .

[18]  M. Elbestawi,et al.  Chip formation during microscale cutting of a medium carbon steel , 2006 .

[19]  M. Cho,et al.  Mechanical etching of micro pockets by powder blasting , 2005 .

[20]  Young-bong Bang,et al.  5-axis micro milling machine for machining micro parts , 2005 .

[21]  Junghwan Ahn,et al.  Effects of the friction coefficient on the minimum cutting thickness in micro cutting , 2005 .

[22]  Richard E. DeVor,et al.  On the Modeling and Analysis of Machining Performance in Micro-Endmilling, Part I: Surface Generation , 2004 .

[23]  Kornel Ehmann,et al.  The Mechanics of Machining at the Microscale: Assessment of the Current State of the Science , 2004 .

[24]  Chang Ju Kim,et al.  A static model of chip formation in microscale milling , 2004 .

[25]  M. A. Mannan,et al.  Surface integrity when machining age hardened Inconel 718 with coated carbide cutting tools , 2004 .

[26]  Fengzhou Fang,et al.  On minimum exit-burr in micro cutting , 2004 .

[27]  Taylan Altan,et al.  Determination of flow stress for metal cutting simulation : a progress report , 2004 .

[28]  David Dornfeld,et al.  Micro-Burr Formation and Minimization through Process Control , 2003 .

[29]  Kui Liu,et al.  Ductile cutting of tungsten carbide , 2001 .

[30]  G. Byrne,et al.  Observations on chip formation and acoustic emission in machining Ti–6Al–4V alloy , 2001 .

[31]  Richard E. DeVor,et al.  An Evaluation of Ploughing Models for Orthogonal Machining , 1999 .

[32]  Hossam A. Kishawy,et al.  Effects of process parameters on material side flow during hard turning , 1999 .

[33]  I. Choudhury,et al.  Machinability of nickel-base super alloys: a general review , 1998 .

[34]  Shuliang Dong,et al.  Effect of diamond tool sharpness on minimum cutting thickness and cutting surface integrity in ultraprecision machining , 1996 .

[35]  G. K. Lal,et al.  Transition from ploughing to cutting during machining with blunt tools , 1977 .

[36]  Yuebin Guo,et al.  A novel hybrid predictive model and validation of unique hook-shaped residual stress profiles in hard turning , 2009 .

[37]  Giuliano Bissacco,et al.  Modelling the cutting edge radius size effect for force prediction in micro milling , 2008 .

[38]  Shih-Ming Wang,et al.  Determination of Cutting Forces for Micro Milling , 2008 .

[39]  Chengfeng Li,et al.  Modelling and analysis of micro scale milling considering size effect, micro cutter edge radius and minimum chip thickness , 2008 .

[40]  Maan Aabid Tawfiq,et al.  A Finite Element Analysis of Orthogonal Machining Using Different Tool Edge Geometries , 2007, Engineering and Technology Journal.

[41]  Yuebin B. Guo,et al.  Finite element modeling of random multiphase materials for micromachining , 2007 .

[42]  Chengfeng Li,et al.  Development of Micro Milling Machine and Experimental Study on Meso Scale Milling , 2007 .

[43]  Xinyu Liu,et al.  Micromilling process planning and modeling for micromold manufacturing , 2007 .

[44]  Tuğrul Özel,et al.  AN EXPERIMENTAL AND MODELING STUDY ON MESO/MICRO END MILLING PROCESS , 2006 .

[45]  Abdul B. Sadat,et al.  The Effect of the Tool Cutting Edge Geometry on the Quality of Machined Surface in Micro Turning Operation , 2005 .

[46]  Martin B.G. Jun,et al.  Cutting Mechanisms and Their Influence on Dynamic Forces, Vibrations and Stability in Micro-Endmilling , 2004 .

[47]  J. Ni,et al.  Experimental analysis of chip formation in micro-milling , 2002 .

[48]  H. Weule,et al.  Micro-Cutting of Steel to Meet New Requirements in Miniaturization , 2001 .

[49]  Hiroaki Tanaka,et al.  Feasibility Study on Ultimate Accuracy in Microcutting Using Molecular Dynamics Simulation , 1993 .

[50]  Hiroaki Tanaka,et al.  Minimum thickness of cut in micromachining , 1992 .

[51]  M.Es.Abdel Moneim,et al.  Tool edge roundness in finish machining at high cutting speeds , 1980 .