Development of a simulation analysis environment for ventilated slab systems

Abstract In this paper, a new simulation environment is presented to evaluate the energy performance of ventilated slab systems in multi-floor buildings. The simulation environment combines a transient two-dimensional finite difference solution of a ventilated slab system comprising slab-wall joints with thermal network model for indoor spaces and associated exterior walls. The developed simulation environment can assess the impact of thermal bridging effects on both heating and cooling building thermal loads. First, the predictions of the developed simulation environment are verified against those obtained from a detailed whole-building energy simulation tool when thermal bridging effects are neglected. Then, a series of parametric analyses are performed to determine the performance of ventilated slab systems under various design and operating conditions considering the thermal bridging effects. It is found that the energy performance of ventilated slab systems and thermal bridging impact depend on a wide range of factors including size of the slab, supply air inlet temperature, air mass flow rate, core diameter, core pitch, and depth of hollow cores. In particular, it is found that the thermal bridge affects significantly the energy performance of ventilated slab systems and can increase both heating and cooling energy consumptions by 17% and 11%, respectively.

[1]  James E. Braun,et al.  An Inverse Gray-Box Model for Transient Building Load Prediction , 2002 .

[2]  Stefano Paolo Corgnati,et al.  Thermal mass activation by hollow core slab coupled with night ventilation to reduce summer cooling loads , 2007 .

[3]  S. Patankar.  Numerical Heat Transfer and Fluid Flow , 2018, Lecture Notes in Mechanical Engineering.

[4]  M. R. Shaw,et al.  Effective use of building mass , 1994 .

[5]  F. Kreith,et al.  Principles of heat transfer , 1962 .

[6]  Shengwei Wang,et al.  Parameter estimation of internal thermal mass of building dynamic models using genetic algorithm , 2006 .

[7]  Xueyuan Peng,et al.  Experimental investigation of the discharge valve dynamics in a reciprocating compressor for trans-critical CO2 refrigeration cycle. , 2012 .

[8]  A. D. Irving,et al.  Least squares parameter estimation of a reduced order thermal model of an experimental building , 1993 .

[9]  Yunus A. Cengel,et al.  Fundamentals of thermal-fluid sciences , 2001 .

[10]  P. N. Surendran,et al.  Influence of active heat sinks on fabric thermal storage in building mass , 2001 .

[11]  Brent Griffith,et al.  Modeling Windows in Energy Plus with Simple Performance Indices , 2009 .

[12]  Young Tae Chae,et al.  Modeling ventilated slab systems using a hollow core slab: Implementation in a whole building energy simulation program , 2013 .

[13]  Frank P. Incropera,et al.  Fundamentals of Heat and Mass Transfer , 1981 .

[14]  John E. Seem.  Modeling of Heat Transfer in Buildings , 1987 .

[15]  L. Marletta,et al.  Energy and cost evaluation of thermal bridge correction in Mediterranean climate , 2011 .

[16]  Luis Pérez-Lombard,et al.  A review on buildings energy consumption information , 2008 .

[17]  Theodoros Theodosiou,et al.  The impact of thermal bridges on the energy demand of buildings with double brick wall constructions , 2008 .

[18]  Paul Fazio,et al.  Thermal performance of a hollow core concrete floor system for passive cooling , 1988 .

[19]  George N Walton,et al.  Thermal Analysis Research Program reference manual , 1983 .

[20]  Jean-Jacques Roux,et al.  Effect of 2D modelling of thermal bridges on the energy performance of buildings: Numerical application on the Matisse apartment , 2001 .