Quench Analysis of High-Current-Density Nb3Sn Conductors in Racetrack Coil Configuration

The luminosity upgrade of the large hadron collider (HL-LHC) requires the development of new type of superconducting cables based on advanced Nb3Sn strands. In the framework of the FP7 European project EUCARD, the cables foreseen for the HL-LHC project have been tested recently in a simplified racetrack coil configuration, the so-called Short Model Coil (SMC). In 2013-2014, two SMCs wound with 40-strand (RRP 108/127) cables, with different heat treatment processes, reached during training at 1.9 K a current and peak magnetic field of 15.9 kA, 13.9 T, and 14.3 kA, 12.7 T, respectively. Using the measured signals from the voltage taps, the behavior of the quenches is analyzed in terms of transverse and longitudinal propagation velocity and hot-spot temperature. These measurements are compared with both analytical and numerical calculations from adiabatic models. The coherence of the results from the presented independent methods helps in estimating the relevance of the material properties and the adiabatic assumption for impregnated Nb3Sn conductor modeling.

[1]  G. Sabbi,et al.  Thermal, Electrical and Mechanical Response to a Quench in Nb3SnSuperconducting Coils , 2003 .

[2]  B. Bordini,et al.  Performance of the Short Model Coils Wound With the CERN 11-T Nb3Sn Conductor , 2015, IEEE Transactions on Applied Superconductivity.

[3]  G. Sabbi,et al.  Thermal, electrical and mechanical response in Nb/sub 3/Sn superconducting coils , 2004, IEEE Transactions on Applied Superconductivity.

[4]  L. Bottura,et al.  Quench Modeling in High-field Nb3Sn Accelerator Magnets , 2015 .

[5]  L. Rossi,et al.  Self-Field Effects in Magneto-Thermal Instabilities for Nb-Sn Strands , 2008, IEEE Transactions on Applied Superconductivity.

[6]  A. Milanese,et al.  The Short Model Coil (SMC) Dipole: An R&D Program Towards ${\rm Nb}_{3}{\rm Sn}$ Accelerator Magnets , 2012, IEEE Transactions on Applied Superconductivity.

[7]  G. Apollinari,et al.  Design of 11 T Twin-Aperture ${\rm Nb}_{3}{\rm Sn}$ Dipole Demonstrator Magnet for LHC Upgrades , 2012, IEEE Transactions on Applied Superconductivity.

[8]  S. Caspi,et al.  Correlation between strand stability and magnet performance , 2005, IEEE Transactions on Applied Superconductivity.

[9]  A. Ghosh.  Effect of Copper Resistivity and Filament Size on the Self-Field Instability of High- $J_{\rm c}$ $\hbox{Nb}_{3} \hbox{Sn}$ Strands , 2013, IEEE Transactions on Applied Superconductivity.

[11]  E. Todesco.  Quench limits in the next generation of magnets , 2014 .

[12]  A. Milanese,et al.  Status of the Activities on the $\hbox{Nb}_{3} \hbox{Sn}$ Dipole SMC and of the Design of the RMC , 2013, IEEE Transactions on Applied Superconductivity.