Multi-physical modelling of reverse electrodialysis

Abstract Reverse electrodialysis (RED) is an electrochemical membrane process that directly converts the energy associated with the concentration difference between two salt solutions into electrical energy by means of a selective controlled mixing. The physics of RED involves the interaction of several phenomena of different nature and space-time scales. Therefore, mathematical modelling and numerical simulation tools are crucial for performance prediction. In this work, a multi-physical modelling approach for the simulation of RED units was developed. A periodic portion of a single cell pair was simulated in two dimensions. Fluid dynamics was simulated by the Navier-Stokes and continuity equations, and ion transfer by the Nernst–Planck approach along with the local electroneutrality condition. The Donnan exclusion theory was implemented in order to simulate interfacial phenomena. A sensitivity analysis of the process performance was carried out. Different membrane/channel geometrical configurations were investigated, including flat membranes, either with or without non-conductive spacers, and profiled membranes. The influence of feeds concentration/velocity was also evaluated. Results confirmed that, with respect to the ideal case of plane (empty) channels and planar membranes, non-conductive spacers always reduce the power produced, while profiled membranes may or may not perform better, depending on stack features and operating conditions.

[1]  Matthias Wessling,et al.  Practical potential of reverse electrodialysis as process for sustainable energy generation. , 2009, Environmental science & technology.

[2]  Giorgio Micale,et al.  A simulation tool for analysis and design of reverse electrodialysis using concentrated brines , 2015 .

[3]  Michele Ciofalo,et al.  Flow and mass transfer in spacer-filled channels for reverse electrodialysis: a CFD parametrical study , 2016 .

[4]  Michele Ciofalo,et al.  Coupling CFD with a one-dimensional model to predict the performance of reverse electrodialysis stacks , 2017 .

[5]  Sujay Chattopadhyay,et al.  Corrugated membrane surfaces for effective ion transport in electrodialysis , 2016 .

[6]  Michele Ciofalo,et al.  CFD modelling of profiled-membrane channels for reverse electrodialysis , 2015 .

[7]  Ralf Cord-Ruwisch,et al.  Detection of low concentration of assimilable organic carbon in seawater prior to reverse osmosis membrane using microbial electrolysis cell biosensor , 2014 .

[8]  Michele Ciofalo,et al.  Pressure drop at low Reynolds numbers in woven-spacer-filled channels for membrane processes: CFD prediction and experimental validation , 2017 .

[9]  Michele Ciofalo,et al.  CFD simulation of channels for direct and reverse electrodialysis , 2012 .

[10]  G Jan Harmsen,et al.  Electrical power from sea and river water by reverse electrodialysis: a first step from the laboratory to a real power plant. , 2010, Environmental science & technology.

[11]  D. Brogioli.  Extracting renewable energy from a salinity difference using a capacitor. , 2009, Physical review letters.

[12]  Kitty Nijmeijer,et al.  Doubled power density from salinity gradients at reduced intermembrane distance. , 2011, Environmental science & technology.

[13]  Dc Kitty Nijmeijer,et al.  Power generation using profiled membranes in reverse electrodialysis , 2011 .

[14]  Adam Michael Weiner,et al.  Increasing the power density and reducing the levelized cost of electricity of a reverse electrodialysis stack through blending , 2015 .

[15]  Dc Kitty Nijmeijer,et al.  Experimentally obtainable energy from mixing river water, seawater or brines with reverse electrodialysis , 2014 .

[16]  K. S. Kim,et al.  Simulation of enhanced power generation by reverse electrodialysis stack module in serial configuration , 2013 .

[17]  João G. Crespo,et al.  Pressure drop in reverse electrodialysis: Experimental and modeling studies for stacks with variable number of cell pairs , 2014 .

[18]  A. A. Moya.  A numerical comparison of optimal load and internal resistances in ion-exchange membrane systems under reverse electrodialysis conditions , 2016 .

[19]  Norollah Kasiri,et al.  Mass transfer modeling of desalination through an electrodialysis cell , 2015 .

[20]  Andrea Cipollina,et al.  CFD analysis of the fluid flow behavior in a reverse electrodialysis stack , 2012 .

[21]  E. Brauns,et al.  Salinity gradient power by reverse electrodialysis: effect of model parameters on electrical power output , 2009 .

[22]  W. Shane Walker,et al.  Junction potentials in thermolytic reverse electrodialysis , 2015 .

[23]  M. Reali,et al.  Closed cycle osmotic power plants for electric power production , 1980 .

[24]  R. E. Pattle.  Production of Electric Power by mixing Fresh and Salt Water in the Hydroelectric Pile , 1954, Nature.

[25]  Lasse Murtomäki,et al.  Ionic transport processes , 2008 .

[26]  Dorothea C. Nijmeijer,et al.  Theoretical power density from salinity gradients using reverse electrodialysis , 2012 .

[27]  J. Veerman,et al.  Reverse electrodialysis: A validated process model for design and optimization , 2011 .

[28]  João G. Crespo,et al.  Mass transfer in reverse electrodialysis: Flow entrance effects and diffusion boundary layer thickness , 2014 .

[29]  Marian Turek,et al.  Renewable energy by reverse electrodialysis , 2007 .

[30]  J. Post,et al.  Energy recovery from controlled mixing salt and fresh water with a reverse electrodialysis system. , 2008, Environmental science & technology.

[31]  V. Vasil'eva,et al.  Local Mass Transfer during Electrodialysis with Ion-Exchange Membranes and Spacers , 2001 .

[32]  G. J. Harmsen,et al.  Reverse electrodialysis : Performance of a stack with 50 cells on the mixing of sea and river water , 2009 .

[33]  Dong-Kwon Kim,et al.  Numerical analysis of transport phenomena in reverse electrodialysis for system design and optimization , 2014 .

[34]  Rosli Mohd Yunus,et al.  A CFD study on the effect of spacer orientation on temperature polarization in membrane distillation modules , 2012 .

[35]  Andrea Cipollina,et al.  Sustainable Energy from Salinity Gradients , 2016 .

[36]  João G. Crespo,et al.  Improved fluid mixing and power density in reverse electrodialysis stacks with chevron-profiled membranes , 2017 .

[37]  Dc Kitty Nijmeijer,et al.  Enhanced mixing in the diffusive boundary layer for energy generation in reverse electrodialysis , 2014 .

[38]  Matthias Wessling,et al.  On the resistances of membrane, diffusion boundary layer and double layer in ion exchange membrane transport , 2010 .

[39]  J. W. Post,et al.  Validity of the Boltzmann equation to describe Donnan equilibrium at the membrane–solution interface , 2013 .

[40]  Andrea Achilli,et al.  Pressure retarded osmosis: From the vision of Sidney Loeb to the first prototype installation — Review , 2010 .

[41]  Michele Ciofalo,et al.  CFD prediction of concentration polarization phenomena in spacer-filled channels for reverse electrodialysis , 2014 .

[42]  João G. Crespo,et al.  Computational fluid dynamics (CFD) assisted analysis of profiled membranes performance in reverse electrodialysis , 2016 .

[43]  Michele Tedesco,et al.  Nernst-Planck transport theory for (reverse) electrodialysis: I. Effect of co-ion transport through the membranes , 2016 .