Actual defect observation results of an extreme-ultraviolet blank mask by coherent diffraction imaging

Extreme-ultraviolet (EUV) lithography poses a number of challenges, one of which is the production of a defect-free mask. To observe the defects on an EUV mask in a quantitative phase image, we have developed a microcoherent EUV scatterometry microscope. The intensity and phase images of the defects are reconstructed using ptychography. We observe four actual defects on an EUV blank mask using the microscope. The reconstructed shapes of the actual defects correspond well to those measured by atomic force microscopy (AFM). Our microscope should therefore function as an essential review tool in characterizing defects.

[1]  J. Miao,et al.  Extending the methodology of X-ray crystallography to allow imaging of micrometre-sized non-crystalline specimens , 1999, Nature.

[2]  J. Rodenburg,et al.  A phase retrieval algorithm for shifting illumination , 2004 .

[3]  Takeshi Yamane,et al.  Actinic EUVL mask blank inspection and phase defect characterization , 2009, Photomask Japan.

[4]  Toshihiko Tanaka,et al.  Actinic Mask Blank Inspection and Signal Analysis for Detecting Phase Defects Down to 1.5 nm in Height , 2009 .

[5]  Chang-Moon Lim,et al.  Evaluation of shadowing and flare effect for EUV tool , 2009, Advanced Lithography.

[6]  K. Goldberg,et al.  Wavelength-specific reflections: A decade of extreme ultraviolet actinic mask inspection research , 2010 .

[7]  Toshihiko Tanaka,et al.  Actinic Phase Defect Detection for Extreme Ultraviolet Lithography Mask with Absorber Patterns , 2010 .

[8]  I. Mochi,et al.  Actinic imaging of native and programmed defects on a full-field mask , 2010, Advanced Lithography.

[9]  K. Goldberg,et al.  Actinic imaging and evaluation of phase structures on extreme ultraviolet lithography masks , 2010 .

[10]  Kenneth A. Goldberg,et al.  Quantitative evaluation of mask phase defects from through-focus EUV aerial images , 2011, Advanced Lithography.

[11]  James P. Shiely,et al.  Shadowing effect modeling and compensation for EUV lithography , 2011, Advanced Lithography.

[12]  Kenneth A. Goldberg,et al.  Printability of native blank defects and programmed defects and their stack structures , 2011, Photomask Technology.

[13]  Takeo Watanabe,et al.  Defect Characterization of an Extreme-Ultraviolet Mask Using a Coherent Extreme-Ultraviolet Scatterometry Microscope , 2012 .

[14]  J. Rodenburg,et al.  Ptychographic electron microscopy using high-angle dark-field scattering for sub-nanometre resolution imaging , 2012, Nature Communications.

[15]  Takeo Watanabe,et al.  Phase imaging of EUV masks using a lensless EUV microscope , 2013, Photomask and Next Generation Lithography Mask Technology.

[16]  Takeo Watanabe,et al.  Phase defect characterization on an extreme-ultraviolet blank mask using microcoherent extreme-ultraviolet scatterometry microscope , 2013 .

[17]  Takeo Watanabe,et al.  Phase Imaging of Extreme-Ultraviolet Mask Using Coherent Extreme-Ultraviolet Scatterometry Microscope , 2013 .

[18]  Hidehiro Watanabe,et al.  EUV actinic blank inspection: from prototype to production , 2013, Advanced Lithography.

[19]  Katsumi Midorikawa,et al.  Development of coherent EUV scatterometry microscope with high-order harmonic for EUV mask inspection , 2013, Optics & Photonics - Optical Engineering + Applications.

[20]  Anthony Garetto,et al.  Scanner arc illumination and impact on EUV photomasks and scanner imaging , 2014, European Mask and Lithography Conference.

[21]  T. Amano,et al.  Variation in phase defect size on extreme ultraviolet mask before and after reflective multilayer coating , 2015 .

[22]  Hidehiro Watanabe,et al.  Detection capability of Actinic Blank Inspection tool , 2015, Other Conferences.

[23]  Hidehiro Watanabe,et al.  Phase defect detection signal analysis: dependence of defect size variation , 2015 .