Design of a Normal Conducting Cavity for Arrival Time Stabilization at FLASH
暂无分享,去创建一个
It has been shown, that beam-based feedback loops stabilize the bunch arrival time in the femtoseconds range. However, further minimizing the bunch arrival time jitter requires a faster actuator that is a normal conducting cavity with higher bandwidth compared to narrow-band superconducting cavities. We present the design of a 4-cell normal conducting cavity that is going to be used in a fast beam-based feedback at free-electron laser FLASH at Hamburg. The input power will be injected to the cavity via a loop coupler from the side of the first cell. The operating frequency of the designed cavity is about 3 GHzwith an adjustable bandwidth. The long range longitudinal wakefield calculation results are reported to investigate the cavity performance for multibeam operation up to 3 MHz bunch repetition rate. The results declare that the influence of the long range wakefield on the arrival time jitter is less than 1 fs.
[1] M. Conte,et al. RF Linear Accelerators , 1991 .
[2] H. Schlarb,et al. FAST FEEDBACK STRATEGIES FOR LONGITUDINAL BEAM STABILIZATION , 2016 .
[3] Alexander W. Chao,et al. Physics Of Collective Beam Instabilities In High Energy Accelerators , 1993 .