Analysis of Current Predictive Control Algorithm for Permanent Magnet Synchronous Motor Based on Three-Level Inverters

In some high-precision control applications, such as defense industry and computerized numerical control machine tools, fast and stable electromagnetic torque response is required to ensure the high dynamic performance of the system, while traditional PI control often cannot meet its requirements. For this purpose, a predictive control algorithm based on the deadbeat control algorithm is proposed in order to improve the performance of the motor current loop. In order to solve the problem that the conventional deadbeat control algorithm has a large dependence on system parameters and low robustness, this paper proposes an improved deadbeat control scheme for the permanent magnet synchronous motor based on the three-level inverters. The scheme is based on the second theorem of Lyapunov stability. The improved deadbeat control algorithm can achieve a good output waveform when the switching frequency is not high and the response speed is fast. The robustness of the system is improved, and there are good characteristics in reduced torque ripple. Compared to the traditional PI regulators, the improved deadbeat control can quickly track the current commands without overshoot and oscillation and suppress torque ripple. The simulation and experimental results show that the improved deadbeat control proposed in this paper has good dynamic and static performance.

[1]  Ming Yang,et al.  Improved deadbeat predictive current control strategy for permanent magnet motor drives , 2011, 2011 6th IEEE Conference on Industrial Electronics and Applications.

[2]  Bruno Allard,et al.  A Comparative Study of Predictive Current Control Schemes for a Permanent-Magnet Synchronous Machine Drive , 2009, IEEE Transactions on Industrial Electronics.

[3]  Alexandros D. Alexandrou,et al.  Development of a Constant Switching Frequency Deadbeat Predictive Control Technique for Field-Oriented Synchronous Permanent-Magnet Motor Drive , 2016, IEEE Transactions on Industrial Electronics.

[4]  Bruno Allard,et al.  Implementation of Hybrid Control for Motor Drives , 2007, IEEE Transactions on Industrial Electronics.

[5]  Enrico Santi,et al.  Autotuning of Digital Deadbeat Current Controllers for Grid-Tie Inverters Using Wide Bandwidth Impedance Identification , 2014, IEEE Transactions on Industry Applications.

[6]  Qing-Chang Zhong,et al.  Nonlinear Control of Single-Phase PWM Rectifiers With Inherent Current-Limiting Capability , 2016, IEEE Access.

[7]  T. Ching,et al.  A New Double-Winding Vernier Permanent Magnet Wind Power Generator for Hybrid AC/DC Microgrid Application , 2018, IEEE Transactions on Magnetics.

[8]  Hongwen Li,et al.  Speed Ripple Minimization of Permanent Magnet Synchronous Motor Based on Model Predictive and Iterative Learning Controls , 2019, IEEE Access.

[9]  Imed Jlassi,et al.  Current sensor fault detection and isolation method for PMSM drives, using average normalised currents , 2016 .

[10]  Zhang,et al.  The improved deadbeat predictive current control method for single-phase PWM rectifiers , 2015 .

[11]  Poh Chiang Loh,et al.  An improved robust predictive current regulation algorithm , 2005, IEEE Transactions on Industry Applications.

[12]  Bo Chen,et al.  Deadbeat Predictive Current Control for Permanent Magnet Synchronous Motor , 2019, 2019 22nd International Conference on Electrical Machines and Systems (ICEMS).

[13]  Ming Yang,et al.  Predictive current control for Permanent Magnet Synchronous Motor based on deadbeat control , 2012, ICIEA 2012.

[14]  Dianguo Xu,et al.  Fault Diagnosis Method of Current Sensor for Permanent Magnet Synchronous Motor Drives , 2018, 2018 International Power Electronics Conference (IPEC-Niigata 2018 -ECCE Asia).

[15]  Yingqiang Li,et al.  A novel direct predictive speed and current controller for PMSM drive , 2016, 2016 IEEE 8th International Power Electronics and Motion Control Conference (IPEMC-ECCE Asia).

[16]  Saad Mekhilef,et al.  Modified Model Predictive Control of a Bidirectional AC–DC Converter Based on Lyapunov Function for Energy Storage Systems , 2016, IEEE Transactions on Industrial Electronics.

[17]  G. Moschopoulos,et al.  A Nonlinear Controller Based on a Discrete Energy Function for an AC/DC Boost PFC Converter , 2013, IEEE Transactions on Power Electronics.

[18]  Turker Turker,et al.  A Robust Predictive Current Controller for PMSM Drives , 2016, IEEE Transactions on Industrial Electronics.

[19]  Chen Yin,et al.  Initial rotor position estimation of PMSM based on high frequency signal injection , 2014, 2014 IEEE Conference and Expo Transportation Electrification Asia-Pacific (ITEC Asia-Pacific).

[20]  Liyan Zhang,et al.  An improved deadbeat plus plug-in repetitive controller for three-phase four-leg inverters , 2017, IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society.

[21]  Pericle Zanchetta,et al.  FPGA Implementation of a Novel Oversampling Deadbeat Controller for PMSM Drives , 2019, IEEE Transactions on Industrial Electronics.

[22]  Ming Yang,et al.  An adaptive dead-time compensation method based on Predictive Current Control , 2016, 2016 IEEE 8th International Power Electronics and Motion Control Conference (IPEMC-ECCE Asia).

[23]  Dianguo Xu,et al.  Sensorless robust predictive current control for induction motor using a speed adaptive full-order observer , 2015, 2015 9th International Conference on Power Electronics and ECCE Asia (ICPE-ECCE Asia).

[24]  Sen Zhang,et al.  A Dynamic Model and Modified One-Cycle Control of Three-Level Front-End Rectifier for Neutral Point Voltage Balance , 2017, IEEE Access.

[25]  Xu Dianguo,et al.  Static error elimination algorithm for PMSM predictive current control , 2014, Proceedings of the 33rd Chinese Control Conference.