Instability of Contact Resistance in MEMS and NEMS DC Switches under Low Force: the Role of Alien Films on the Contact Surface

The metal contact is one of the most crucial parts in ohmic-contact microelectromechanical (MEMS) switches, as it determines the device performance and reliability. It has been observed that there is contact instability when the contact force is below a threshold value (minimum contact force). However, there has been very limited knowledge so far about the unstable electrical contact behavior under low contact force. In this work, the instability of Au-Au micro/nano-contact behavior during the initial stage of contact formation is comprehensively investigated for the first time. It has been found that the alien film on the contact surface plays a critical role in determining the contact behavior at the initial contact stage under low contact force. A strong correlation between contact resistance fluctuation at the initial contact stage and the presence of a hydrocarbon alien film on the contact surface is revealed. The enhancement of contact instability due to the alien film can be explained within a framework of trap-assisted tunneling.

[1]  R. Holm.  Electric contacts; theory and application , 1967 .

[2]  I. Lundström,et al.  Tunneling to traps in insulators , 1972 .

[3]  Tennyson Smith,et al.  The hydrophilic nature of a clean gold surface , 1980 .

[4]  Harry B. Gray,et al.  Electron Tunneling in Proteins: Coupling Through a β Strand , 1995 .

[5]  H. Gray,et al.  Electron tunneling in proteins: coupling through a beta strand. , 1995, Science.

[6]  Daniel Moses,et al.  Subpicosecond photoinduced electron transfer from conjugated polymers to functionalized fullerenes , 1996 .

[7]  S. Majumder,et al.  Study of contacts in an electrostatically actuated microswitch , 1998, Electrical Contacts - 1998. Proceedings of the Forty-Fourth IEEE Holm Conference on Electrical Contacts (Cat. No.98CB36238).

[8]  M. Mehregany,et al.  Contact physics of gold microcontacts for MEMS switches , 1998, Electrical Contacts - 1998. Proceedings of the Forty-Fourth IEEE Holm Conference on Electrical Contacts (Cat. No.98CB36238).

[9]  M. Sakata,et al.  Micromachined relay which utilizes single crystal silicon electrostatic actuator , 1999, Technical Digest. IEEE International MEMS 99 Conference. Twelfth IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.99CH36291).

[10]  K. C. Kao,et al.  High-field electrical conduction in polyimide films , 1999 .

[11]  Vladimir N. Prigodin,et al.  Nature of insulator–metal transition and novel mechanism of charge transport in the metallic state of highly doped electronic polymers , 2001 .

[12]  Gabriel M. Rebeiz,et al.  RF MEMS switches and switch circuits , 2001 .

[13]  Gabriel M. Rebeiz.  RF MEMS: Theory, Design and Technology , 2003 .

[14]  J. Houston,et al.  A single asperity study of Au/Au electrical contacts , 2003 .

[15]  Kyriakos Komvopoulos,et al.  Electromechanically induced transition from nonohmic to ohmic behavior at contact interfaces , 2004 .

[16]  S. T. Patton,et al.  Fundamental studies of Au contacts in MEMS RF switches , 2005 .

[17]  J. R. Reid,et al.  Microswitches with sputtered Au, AuPd,Au-on-AuPt, and AuPtCu alloy electric contacts , 2006, IEEE Transactions on Components and Packaging Technologies.

[18]  Steven T. Patton,et al.  Effects of dielectric charging on fundamental forces and reliability in capacitive microelectromechanical systems radio frequency switch contacts , 2006 .

[19]  M. Dugger,et al.  Electrical Contact Resistance Degradation of a Hot-Switched Simulated Metal MEMS Contact , 2005, IEEE Transactions on Components and Packaging Technologies.

[20]  N. McGruer,et al.  Contact resistance study of noble metals and alloy films using a scanning probe microscope test station , 2007 .

[21]  Stephan Menzel,et al.  A new test facility for efficient evaluation of MEMS contact materials , 2007 .

[22]  Jong-Uk Bu,et al.  Contact materials and reliability for high power RF-MEMS switches , 2007, 2007 IEEE 20th International Conference on Micro Electro Mechanical Systems (MEMS).

[23]  Young-Chang Joo,et al.  Investigation of the electrical contact behaviors in Au-to-Au thin-film contacts for RF MEMS switches , 2008 .

[24]  Steven L. Wolfley,et al.  A nanomechanical switch for integration with CMOS logic , 2008 .

[25]  Walied A. Moussa,et al.  A Coupled Field Multiphysics Modeling Approach to Investigate RF MEMS Switch Failure Modes under Various Operational Conditions , 2009, Sensors.

[26]  A. Crunteanu,et al.  Charging in Dielectricless Capacitive RF-MEMS Switches , 2009, IEEE Transactions on Microwave Theory and Techniques.

[27]  Norikazu Fuse,et al.  Band gap energies and localized states in several insulating polymers estimated by optical measurements , 2010, 2010 Annual Report Conference on Electrical Insulation and Dielectic Phenomena.

[28]  Yuh-Chung Hu,et al.  Review on the Modeling of Electrostatic MEMS , 2010, Sensors.

[29]  V. Pott,et al.  Design and Scalability of a Memory Array Utilizing Anchor-Free Nanoelectromechanical Nonvolatile Memory Device , 2012, IEEE Electron Device Letters.