Discrete crack growth analysis methodology for through cracks in pressurized fuselage structures

A methodology for simulating the growth of long through cracks in the skin of pressurized aircraft fuselage structures is described. Crack trajectories are allowed to be arbitrary and are computed as part of the simulation. The interaction between the mechanical loads acting on the superstructure and the local structural response near the crack tips is accounted for by employing a hierarchical modelling strategy. The structural response for each cracked configuration is obtained using a geometrically non-linear shell finite element analysis procedure. Four stress intensity factors, two for membrane behaviour and two for bending using Kirchhoff plate theory, are computed using an extension of the modified crack closure integral method. Crack trajectories are determined by applying the maximum tangential stress criterion. Crack growth results in localized mesh deletion, and the deletion regions are remeshed automatically using a newly developed all-quadrilateral meshing algorithm. The effectiveness of the methodology, and its applicability to performing practical analyses of realistic structures, is demonstrated by simulating curvilinear crack growth in a fuselage panel that is representative of a typical narrow-body aircraft. The predicted crack trajectory and fatigue life compare well with measurements of these same quantities from a full-scale pressurized panel test.

[1]  Leonard J. Gray,et al.  Simulation of 3D non-planar fatigue crack growth in a turbine blade root , 1992 .

[2]  E. S. Folias.  A finite line crack in a pressurized spherical shell , 1965 .

[3]  F. Erdogan,et al.  On the Crack Extension in Plates Under Plane Loading and Transverse Shear , 1963 .

[4]  Satya N. Atluri,et al.  Computational Schemes for Integrity Analyses of Fuselage Panels in Aging Airplanes , 1991 .

[5]  Jean Lemaitre,et al.  Fracture mechanics analysis of pressurized cracked shallow shells , 1977 .

[6]  F. A. Brogan,et al.  Some computational tools for the analysis of through cracks in stiffened fuselage shells , 1993 .

[7]  G. Sih.  Strain-energy-density factor applied to mixed mode crack problems , 1974 .

[8]  James R. Maclin.  Performance of fuselage pressure structure , 1992 .

[9]  Alan T. Zehnder,et al.  Fatigue fracture of thin plates under tensile and transverse shear stresses , 1995 .

[10]  Hussain,et al.  Strain Energy Release Rate for a Crack Under Combined Mode I and Mode II , 1974 .

[11]  James H. Starnes,et al.  Damaged stiffened shell research at NASA. Langley Research Center , 1992 .

[12]  Albert S. Kobayashi,et al.  Tear Straps in Airplane Fuselage , 1992 .

[13]  F. Erdogan,et al.  Cylindrical and spherical shells with cracks , 1969 .

[14]  C. Hui,et al.  A theory for the fracture of thin plates subjected to bending and twisting moments , 1993 .

[15]  Paul A. Wawrzynek,et al.  An algorithm to generate quadrilateral or triangular element surface meshes in arbitrary domains with applications to crack propagation , 1995 .

[16]  Thierry Coupez,et al.  FORGING OF A CONNECTING ROD: 3D FINITE ELEMENT CALCULATIONS , 1992 .

[17]  Leonard J. Gray,et al.  CRACK PROPAGATION MODELING , 1994 .

[18]  J. Sethna,et al.  Derivation of a general three-dimensional crack-propagation law: A generalization of the principle of local symmetry. , 1993, Physical review. B, Condensed matter.

[19]  J. Schijve,et al.  Bulging of fatigue cracks in a pressurized aircraft fuselage , 1991 .

[20]  J. L. Sanders,et al.  A longitudinal crack in a cylindrical shell under internal pressure , 1969 .