Review of the effects of low-velocity impact events on advanced fiber-reinforced polymer composite structures

[1]  G. Anbuchezhiyan,et al.  Dynamic characteristic studies of novel flexible flip-type Savonius hydrokinetic turbine , 2023, Materials Today: Proceedings.

[2]  N. M. Mubarak,et al.  A synergistic effect on enriching the Mg–Al–Zn alloy-based hybrid composite properties , 2022, Scientific Reports.

[3]  R. Pugazhenthi,et al.  Influence of Coated Electrode in Nanopowder Mixed EDM of Al–Zn–Mg–Si3N4 Composite , 2022, Advances in Materials Science and Engineering.

[4]  S. Kathiresan,et al.  A study on in-vitro behaviour of stainless steel 316L subjected to rotational magnetorheological abrasive flow finishing process , 2022, Surface Topography: Metrology and Properties.

[5]  G. Anbuchezhiyan,et al.  Comparative investigation of impact strength and water absorption characteristics of novel grass powder blended GFRP and jute fibre blended GFRP with plain GFRP , 2022, Materials Today: Proceedings.

[6]  Rajesh Kumar,et al.  Comparative investigation of tensile strength and hardness of coir powder blended GFRP and aluminium oxide powder blended GFRP against GFRP – A novel approach , 2022, Materials Today: Proceedings.

[7]  B. Mohan,et al.  Enhancing the Microstructure and Mechanical properties of Si3N4- BN strengthened Al-Zn-Mg Alloy Hybrid Nano Composites using vacuum assisted stir casting method , 2022, Journal of Materials Research and Technology.

[8]  G. Anbuchezhiyan,et al.  Comparative study of flexural strength and fire resistance of novel eggshell powder blended GFRP and jute fibre blended GFRP with GFRP , 2022, Materials Today: Proceedings.

[9]  R. Pugazhenthi,et al.  Experimental analysis on Feed force reduction performance by nano fluid of nano- alumina particles enriched waste coconut oil in wet machining of SAE 1045 steel shaft , 2022, Materials Today: Proceedings.

[10]  R. Pugazhenthi,et al.  Experimentally investigating cutting force reduction performance by nano-alumina particles enriched waste coconut oil Nano fluid in electric motor shaft manufacturing , 2022, Materials Today: Proceedings.

[11]  G. Anbuchezhiyan,et al.  Optimizing WEDM Parameters on Nano-SiC-Gr Reinforced Aluminum Composites Using RSM , 2022, Advances in Materials Science and Engineering.

[12]  C. Dhanasekaran,et al.  Parametric analysis on drilling of aluminium alloy hybrid composites reinforced with SIC/WC , 2022, Engineering Research Express.

[13]  R. Pugazhenthi,et al.  Experimentally exploring nano-fluid of alumina nano-particles enriched waste coconut oil effects in cutting zone temperature reduction in motor shaft manufacturing process , 2022, Materials Today: Proceedings.

[14]  R. Pugazhenthi,et al.  Experimental investigation on tool wear reduction by nano- alumina particles enriched waste coconut oil nano-fluid for machining SAE 1045 shaft , 2022, Materials Today: Proceedings.

[15]  K. Veeranjaneyulu,et al.  An investigation of the effects of hot rolling on the microstructure and mechanical behavior of nano-sized SiC particulates reinforced Al6063 alloy composites , 2022, Materials Today: Proceedings.

[16]  R. Pugazhenthi,et al.  Experimental investigations on synthesis and characterization of tamarind seed powder reinforced Bio- composites , 2022, Materials Today: Proceedings.

[17]  M. Chandrasekaran,et al.  Effect of preheating on machinability of titanium alloy , 2022, Materials Today: Proceedings.

[18]  R. Pugazhenthi,et al.  Reconnoitering the influence of nanofluid of Nano- alumina particles enriched waste coconut oil in Machining SAE 1045 shaft on modification Surface finish , 2022, Materials Today: Proceedings.

[19]  Analyzing the Surface Roughness of WC Particulate Hardened MMCs with Al-Mg-Cr alloys , 2022, Journal of Pharmaceutical Negative Results.

[20]  Interrelating the Breaking Strength of Novel Nano Tungsten Carbide Reinforced Aluminium Alloy Composites with Al-Mg-Cr Alloy , 2022, Journal of Pharmaceutical Negative Results.

[21]  A. Chanda,et al.  Impact Response and Damage Tolerance of Hybrid Glass/Kevlar-Fibre Epoxy Structural Composites , 2021, Polymers.

[22]  M. V. Kini,et al.  A review on low velocity impact study of hybrid polymer composites , 2021 .

[23]  R. Pugazhenthi,et al.  An investigation on wear properties of SiC/WC strengthened aluminium alloy hybrid composites , 2021 .

[24]  K. Khan,et al.  Temperature-Frequency–Dependent Viscoelastic Properties of Neat Epoxy and Fiber Reinforced Polymer Composites: Experimental Characterization and Theoretical Predictions , 2020, Polymers.

[25]  S. S.,et al.  Experimental investigation of basalt/s-glass/epoxy/PVC H-130 hybrid sandwich composite , 2020 .

[26]  R. Velmurugan,et al.  Experimental and analytical investigation of thermo-mechanical responses of pure epoxy and carbon/Kevlar/S-glass/E-glass/epoxy interply hybrid laminated composites for aerospace applications , 2018, International Journal of Polymer Analysis and Characterization.

[27]  T. Muthuramalingam,et al.  Effect of process parameters on mechanical properties of hollow glass microsphere reinforced magnesium alloy syntactic foams under vacuum die casting , 2018, Archives of Civil and Mechanical Engineering.

[28]  Memduh Kara,et al.  Impact behavior of carbon fiber/epoxy composite tubes reinforced with multi-walled carbon nanotubes at cryogenic environment , 2018 .

[29]  Bruce L. Tai,et al.  Low-velocity impact response of 3D-printed lattice structure with foam reinforcement , 2018 .

[30]  R. Velmurugan,et al.  Advanced 3D and 2D damage assessment of low velocity impact response of glass and Kevlar fiber reinforced epoxy hybrid composites , 2018 .

[31]  N. Bhatnagar,et al.  An experimental and numerical investigation on the low velocity impact response of thermoplastic hybrid composites , 2018 .

[32]  G. Fang,et al.  Influence of temperature on the impact behavior of woven-ply carbon fiber reinforced thermoplastic composites , 2018 .

[33]  J. Leng,et al.  Impact response of hybrid carbon/glass fibre reinforced polymer composites designed for engineering applications , 2018 .

[34]  R. Othman,et al.  Low-velocity impact of woven CFRE composites under different temperature levels , 2017 .

[35]  T. Muthuramalingam,et al.  Synthesis and characterization of hollow glass microspheres reinforced magnesium alloy matrix syntactic foam , 2017 .

[36]  E. Mohan,et al.  Wear Behavior of Brass Based Composite Reinforced with SiC and Produced by Stir Casting Process , 2023, Materials Research.

[37]  K. Shanmuganandam,et al.  Comparative Investigation on Drilling Characteristics (Material Removal Rate) of Novel Kitchen Waste Blended GFRP and Bagasse Blended GFRP With Plain GFRP , 2022 .

[38]  S. Kathiresan,et al.  Influence of microstructure and mechanical properties of TiC reinforced magnesium nano composites , 2020, Materials Today: Proceedings.