Application of grey-based Taguchi method for simultaneous optimization of multiple quality characteristics in laser transmission welding process of thermoplastics

In the present work, Taguchi method in combination with grey relational analysis is applied for solving multi-criteria optimization problems in laser transmission welding processes. The welding parameters, namely laser power, welding speed and defocal position are optimized with respect to weld strength and weld width. Using the Taguchi quality design concept, an L16 orthogonal array table is chosen for the experiments. Grey relational analysis is applied to convert the multiple quality characteristics to a single performance characteristic called grey relational grade. Optimal welding parameters are then determined by the Taguchi method using grey relational grade as the quality index. Furthermore, analysis of variance is carried out to identify the most significant factor for the overall output feature of the laser transmission welding process. The results of the confirmation experiment show that the optimal laser transmission welding parameters can be determined effectively so as to improve multiple quality characteristics through this approach.

[1]  J. L Lin,et al.  The use of the orthogonal array with grey relational analysis to optimize the electrical discharge machining process with multiple performance characteristics , 2002 .

[2]  Chia-Ming Chang,et al.  The use of grey-based Taguchi methods to determine submerged arc welding process parameters in hardfacing , 2002 .

[3]  T.-R. Lin,et al.  Application of grey-Taguchi method to optimise drilling of aluminium alloy 6061 with multiple performance characteristics , 2004 .

[4]  C. C. Tsao,et al.  Grey–Taguchi method to optimize the milling parameters of aluminum alloy , 2009 .

[5]  Friedrich G. Bachmann,et al.  Laser welding of polymers using high-power diode lasers , 2002, SPIE LASE.

[6]  Y. S. Tarng,et al.  Optimisation of the weld bead geometry in gas tungsten arc welding by the Taguchi method , 1998 .

[7]  Dan Watt,et al.  Welding thermoplastic elastomers to polypropylene with a diode laser , 2002 .

[8]  Edmund Haberstroh,et al.  INFLUENCE OF CARBON BLACK PIGMENTATION ON THE LASER BEAM WELDING OF PLASTICS MICRO PARTS , 2001 .

[9]  D. Mark Douglass,et al.  Laser welding of polyolefin elastomers to thermoplastic polyolefin , 2003 .

[10]  U. Çaydas,et al.  Use of the grey relational analysis to determine optimum laser cutting parameters with multi-performance characteristics , 2008 .

[11]  Y. Tarng,et al.  Optimization of Plasma Arc Welding Parameters by Using the Taguchi Method with the Grey Relational Analysis , 2007 .

[12]  Deng Ju-Long,et al.  Control problems of grey systems , 1982 .

[13]  Marianna Kontopoulou,et al.  Contour Laser – Laser-Transmission Welding of Glass Reinforced Nylon 6 , 2006 .

[14]  C. Wang,et al.  Optimizing multiple quality characteristics via Taguchi method-based Grey analysis , 2007 .

[15]  H. Potente,et al.  Laser Transmission Welding of Thermoplastics: Analysis of the Heating Phase , 1999 .

[16]  Madhan Shridhar Phadke,et al.  Quality Engineering Using Robust Design , 1989 .

[17]  Elsayed A. Elsayed,et al.  Optimal levels of process parameters for products with multiple characteristics , 1993 .

[18]  R. Poprawe,et al.  Laser transmission joining in microtechnology , 2006 .

[19]  C. C. Wang,et al.  Optimising multiple qualities of Nd:YAG laser welding onto magnesium alloy via grey relational analysis , 2005 .

[20]  V. Kagan,et al.  Laser Transmission Welding of Semicrystalline Thermoplastics - Part II: Analysis of Mechanical Performance of Welded Nylon , 2004 .

[21]  Thomas K. L. Tong,et al.  Multi-criteria material selections and end-of-life product strategy: Grey relational analysis approach , 2007 .

[22]  M. Abreu,et al.  High-speed laser welding of plastic films , 2000 .