Influence of fragmentation on the capacity of aluminum alloy plates subjected to ballistic impact

Abstract In this paper, the perforation resistance of 20 mm thick aluminum plates subjected to moderate velocity impacts is examined experimentally and numerically. Plates made of four different tempers of aluminum alloy AA6070 were struck by ogive-nosed and blunt-nosed cylindrical projectiles with a diameter of 20 mm. We show that for this alloy material strength is not the decisive factor for the plates' resistance against perforation, but that a combination of ductility and strength, which inhibits fragmentation of the target plate, might be more important. Interpreting the results with previously obtained experimental data in mind sheds new light upon the role fragmentation plays for the capacity of metal plates undergoing impact loading. Increasing the material strength increases the probability of fragment ejection, which is unfavorable for the capacity. A novel 3D node-splitting technique which is available in the finite element code IMPETUS Afea Solver was employed to describe possible fragmentation and debris ejection in the numerical simulations. By using the node-splitting approach instead of element erosion, an improvement in the qualitative description of fracture for the least ductile tempers can be obtained without compromising the predicted component behavior for the more ductile tempers.

[1]  Odd Sture Hopperstad,et al.  Quasi-brittle fracture during structural impact of AA7075-T651 aluminium plates , 2010 .

[2]  E. P. Chen,et al.  Finite element simulation of perforation and penetration of aluminum targets by conical-nosed steel rods☆ , 1990 .

[3]  A. Hanssen,et al.  Modeling fragmentation with new high order finite element technology and node splitting , 2015 .

[4]  R. L. Woodward,et al.  The interrelation of failure modes observed in the penetration of metallic targets , 1984 .

[5]  J. Hutchinson,et al.  Modification of the Gurson Model for shear failure , 2008 .

[6]  M. J. Forrestal,et al.  Perforation of aluminum armor plates with conical-nose projectiles , 1990 .

[7]  A. C. Mackenzie,et al.  On the influence of state of stress on ductile failure initiation in high strength steels , 1977 .

[8]  Ramón Zaera,et al.  Experimental and numerical study on the perforation process of mild steel sheets subjected to perpendicular impact by hemispherical projectiles , 2009 .

[9]  Werner Goldsmith,et al.  The mechanics of penetration of projectiles into targets , 1978 .

[10]  T. Børvik,et al.  On the plastic anisotropy of an aluminium alloy and its influence on constrained multiaxial flow , 2011 .

[11]  M. Ortiz,et al.  Computational modelling of impact damage in brittle materials , 1996 .

[12]  G. R. Johnson,et al.  Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures , 1985 .

[13]  Kazutake Komori,et al.  Simulation of shearing by node separation method , 2001 .

[14]  S. R. Bodner,et al.  Dynamic perforation of viscoplastic plates by rigid projectiles , 1983 .

[15]  Yi-long Bai,et al.  Introduction To Adiabatic Shear Localization , 2014 .

[16]  T. L. Warren,et al.  Perforation of 7075-T651 Aluminum Armor Plates with 7.62 mm APM2 Bullets , 2010 .

[17]  G. Testa,et al.  High strain rate fracture behaviour of fused silica , 2014 .

[18]  D. Agard,et al.  Microtubule nucleation by γ-tubulin complexes , 2011, Nature Reviews Molecular Cell Biology.

[19]  M. Rodríguez-Millán,et al.  Experimental Study on the Perforation Process of 5754-H111 and 6082-T6 Aluminium Plates Subjected to Normal Impact by Conical, Hemispherical and Blunt Projectiles , 2014 .

[20]  Magnus Langseth,et al.  Stress–strain behaviour of aluminium alloys at a wide range of strain rates , 2009 .

[21]  T. L. Warren,et al.  Perforation of 5083-H116 Aluminum Armor Plates with Ogive-Nose Rods and 7.62 mm APM2 Bullets , 2010 .

[22]  T. W. Ipson,et al.  Ballistic Perforation Dynamics , 1963 .

[23]  Tore Børvik,et al.  Effects of heat treatment on the ballistic properties of AA6070 aluminium alloy , 2013 .

[24]  T. Børvik,et al.  Behaviour of Al-Mg-Si alloys at a wide range of temperatures and strain rates , 2015 .

[25]  Tore Børvik,et al.  Perforation of 12 mm thick steel plates by 20 mm diameter projectiles with flat, hemispherical and c , 2002 .

[26]  Xiaopeng Xu,et al.  Numerical simulations of fast crack growth in brittle solids , 1994 .

[27]  M. Langseth,et al.  Ballistic penetration of steel plates , 1999 .

[28]  Wing Kam Liu,et al.  Nonlinear Finite Elements for Continua and Structures , 2000 .

[29]  G. S. Sekhon,et al.  Effect of projectile nose shape, impact velocity and target thickness on deformation behavior of aluminum plates , 2007 .

[30]  Jonas A. Zukas,et al.  High velocity impact dynamics , 1990 .

[31]  A. Gurson.  Continuum Theory of Ductile Rupture by Void Nucleation and Growth: Part I—Yield Criteria and Flow Rules for Porous Ductile Media , 1977 .

[32]  T. Børvik,et al.  Perforation resistance of five different high-strength steel plates subjected to small-arms projectiles , 2009 .

[33]  T. Børvik,et al.  A computational model of viscoplasticity and ductile damage for impact and penetration , 2001 .

[34]  John F. Moxnes,et al.  Experimental and numerical study of the fragmentation of expanding warhead casings by using different numerical codes and solution techniques , 2014 .