Design of tapered leaky-wave antennas in hybrid waveguide-planar technology for millimeter waveband applications

Different types of waveguide leaky-wave antennas, asymmetrically perturbed with printed-circuits, are studied in this paper. The capability to modify the leakage constant of the excited leaky-wave mode, while maintaining unchanged its phase constant, is studied in detail for each design. Several slot and strip configurations are proposed, in which the width and the position of the planar printed circuit perturbation is modified along the length of the antenna to obtain different tapering topologies. All of them are mechanically flexible to realize, thus simplifying the manufacturing process for millimeter wavelengths applications. The two-dimensional method used for the analysis is accurate for any geometry of the planar perturbation, and also allows for the computation of the whole spectrum of modes in these open waveguides. This makes possible to predict the appearance of unwanted channel-guide modes, and also allows for the study of the coupling effect between the desired leaky-wave mode and them. A tapered design is performed and compared with full-wave three-dimension simulations to validate the proposed technology.

[1]  F. K. Schwering,et al.  Millimeter wave antennas , 1992, Proc. IEEE.

[2]  Alessandro Galli,et al.  Stepped leaky-wave antennas for microwave and millimeter wave applications , 1997, Ann. des Télécommunications.

[3]  Alejandro Álvarez Melcón,et al.  Radiation analysis in the space domain of laterally shielded planar transmission lines: 2. Applications , 2004 .

[4]  Paolo Baccarelli,et al.  Full‐wave analysis of printed leaky‐wave phased arrays , 2002 .

[5]  Alejandro Álvarez Melcón,et al.  Radiation analysis in the space domain of laterally shielded planar transmission lines , 2003, IEEE Antennas and Propagation Society International Symposium. Digest. Held in conjunction with: USNC/CNC/URSI North American Radio Sci. Meeting (Cat. No.03CH37450).

[6]  Alejandro Álvarez Melcón,et al.  Non-orthogonality relations between complex-hybrid-modes: an application for the leaky-wave analysis , 2003, IMS 2003.

[7]  A. A. Oliner,et al.  A Novel Phased Array of Printed-Circuit Leaky-Wave Line Sources , 1987, 1987 17th European Microwave Conference.

[8]  Carlton H. Walter,et al.  Traveling Wave Antennas , 1970, Antenna and EM Modeling with MATLAB® Antenna Toolbox.

[9]  Ching-Kuang C. Tzuang,et al.  An integrated quasi-planar leaky-wave antenna , 1996 .

[10]  Alejandro Álvarez Melcón,et al.  Radiation analysis in the space domain of laterally shielded planar transmission lines: 1. Theory , 2003 .

[11]  E. Yamashita,et al.  Leakage characteristics of groove guide having a conductor strip , 1994 .

[12]  Jyh-Wen Sheen,et al.  Analysis and design of feeding structures for microstrip leaky wave antenna , 1995, IMS 1995.

[13]  A. Oliner,et al.  Microstrip leaky wave strip antennas , 1986, 1986 Antennas and Propagation Society International Symposium.

[14]  Radiation characteristics of one-dimensional periodic leaky-wave antennas , 1997, IEEE Antennas and Propagation Society International Symposium 1997. Digest.

[15]  E. Yamashita,et al.  Space wave leakage from higher order modes on various planar transmission line structures , 1994, 1994 IEEE MTT-S International Microwave Symposium Digest (Cat. No.94CH3389-4).

[16]  A. A. Oliner,et al.  Slot-mode propagation in rectangular waveguide , 1966 .

[17]  J. Stén,et al.  Reconstruction of electromagnetic minimum energy sources in a prolate spheroid , 2004 .

[18]  K. Gupta,et al.  Suppression of slot mode in slotted waveguide antennas , 1975 .

[19]  Fabrizio Frezza,et al.  The transition region between bound-wave and leaky-wave ranges for a partially dielectric-loaded open guiding structure , 1990 .

[20]  Mikio Tsuji,et al.  Coupling between different leaky-mode types in stub-loaded leaky waveguides , 1994 .

[21]  Arthur A. Oliner.  Scannable Millimeter Wave Arrays. Volume 2 , 1989 .