Theoretical analysis of a liquid desiccant based indirect evaporative cooling system

A compact desiccant-evaporative HMX (heat and mass exchanger) has been proposed by combining the benefits of the regenerative indirect evaporative cooling and the liquid desiccant dehumidification. In this design, the compact HMX was able to cool and dehumidify the product air simultaneously in a single unit. A computational model has been developed and validated using experimental data. The model displayed good agreement with the experimental findings with maximum discrepancy of 8%. The heat and mass transfer behavior was theoretically investigated to illustrate the detailed air treatment performance of the HMX. Simulations were performed to study the effect of several key parameters on the HMX's performance. Due to the effect of pre-cooling and pre-dehumidification, the working air showed improved cooling potential in the working channel. Consequently, the temperature of the product air could be reduced below the dew-point temperature of intake air. Simulation results showed that the outlet temperature of the product air was affected by the working-to-intake air flow rate ratio and the dimensionless channel length, while the outlet humidity ratio of the product air was influenced by the length of the liquid desiccant film and the dimensionless channel length.

[1]  Chengqin Ren,et al.  Simulation and analysis of a novel liquid desiccant air-conditioning system. , 2009 .

[2]  S. Riffat,et al.  Numerical study of a novel counter-flow heat and mass exchanger for dew point evaporative cooling. , 2008 .

[3]  William M. Worek,et al.  Optimization of wet-surface heat exchangers , 1989 .

[4]  Wasim Saman,et al.  An experimental study of a cross-flow type plate heat exchanger for dehumidification/cooling , 2002 .

[5]  Chengqin Ren,et al.  Effectiveness–NTU relation for packed bed liquid desiccant–air contact systems with a double film model for heat and mass transfer , 2008 .

[6]  Shailesh Kumar,et al.  An experimental study of a novel dew point evaporative cooling system , 2010 .

[7]  Ruzhu Wang,et al.  Use of liquid desiccant cooling to improve the performance of vapor compression air conditioning , 2001 .

[8]  Borong Lin,et al.  Annual performance of liquid desiccant based independent humidity control HVAC system , 2006 .

[9]  D. Yogi Goswami,et al.  Effectiveness of Heat and Mass Transfer Processes in a Packed Bed Liquid Desiccant Dehumidifier/Regenerator , 2000 .

[10]  Hadi Pasdarshahri,et al.  Potential of a desiccant-evaporative cooling system performance in a multi-climate country , 2011 .

[11]  Jae-Weon Jeong,et al.  Energy saving potential of liquid desiccant in evaporative-cooling-assisted 100% outdoor air system , 2013 .

[12]  Jae-Weon Jeong,et al.  Impact of integrated hot water cooling and desiccant-assisted evaporative cooling systems on energy savings in a data center , 2014 .

[13]  Youxian Sun,et al.  A hybrid dehumidifier model for real-time performance monitoring, control and optimization in liquid desiccant dehumidification system , 2013 .

[14]  Kian Jon Chua,et al.  Experimental and numerical study of an evaporatively-cooled condenser of air-conditioning systems , 2015 .

[15]  Kian Jon Chua,et al.  Performance evaluation of an indirect pre-cooling evaporative heat exchanger operating in hot and humid climate , 2015 .

[16]  Kambiz Vafai,et al.  Analysis of heat and mass transfer between air and falling film in a cross flow configuration , 2004 .

[17]  H. F. Zhang,et al.  Numerical simulation and theoretical analysis of heat and mass transfer in a cross flow liquid desiccant air dehumidifier packed with honeycomb paper , 2004 .

[18]  Xiaosong Zhang,et al.  Experimental study on a new internally cooled/heated dehumidifier/regenerator of liquid desiccant systems , 2008 .

[19]  Donggen Peng,et al.  Model validation and case study on internally cooled/heated dehumidifier/regenerator of liquid desiccant systems , 2009 .

[20]  Philip Davies,et al.  Modelling and experimental verification of a solar-powered liquid desiccant cooling system for greenhouse food production in hot climates , 2012 .

[21]  Hongxing Yang,et al.  Development of simplified prediction model for internally cooled/heated liquid desiccant dehumidification system , 2013 .

[22]  Xiaosong Zhang,et al.  Recent advancements in liquid desiccant dehumidification technology , 2014 .

[23]  Fang Yuan,et al.  A global optimization method for evaporative cooling systems based on the entransy theory , 2012 .

[24]  Ala Hasan,et al.  Indirect evaporative cooling : Past, present and future potentials , 2012 .

[25]  Jun Bi,et al.  More efforts, more benefits: Air pollutant control of coal-fired power plants in China , 2015 .

[26]  Sabah A. Abdul-Wahab,et al.  Predictions of moisture removal rate and dehumidification effectiveness for structured liquid desiccant air dehumidifier , 2004 .

[27]  S. Jain,et al.  Experimental performance of a liquid desiccant dehumidification system under tropical climates , 2011 .

[28]  Eric Kozubal,et al.  A desiccant-enhanced evaporative air conditioner: Numerical model and experiments , 2013 .

[29]  Ala Hasan.  Going below the wet-bulb temperature by indirect evaporative cooling: Analysis using a modified ε-NTU method , 2012 .

[30]  Eric Kozubal,et al.  Desiccant Enhanced Evaporative Air-Conditioning (DEVap): Evaluation of a New Concept in Ultra Efficient Air Conditioning , 2011 .

[31]  Tao Zhang,et al.  Experimental analysis of an internally-cooled liquid desiccant dehumidifier , 2013 .

[32]  Wenming Yang,et al.  Fundamental formulation of a modified LMTD method to study indirect evaporative heat exchangers , 2014 .

[33]  Hongxing Yang,et al.  A review of the mathematical models for predicting the heat and mass transfer process in the liquid desiccant dehumidifier , 2014 .

[34]  A. Hepbasli,et al.  Thermodynamic performance assessment of a novel air cooling cycle: Maisotsenko cycle , 2011 .

[35]  Changhong Zhan,et al.  Comparative study of the performance of the M-cycle counter-flow and cross-flow heat exchangers for indirect evaporative cooling – Paving the path toward sustainable cooling of buildings , 2011 .

[36]  L. Mei,et al.  A technical review on use of liquid-desiccant dehumidification for air-conditioning application , 2008 .

[37]  Siaw Kiang Chou,et al.  Achieving better energy-efficient air conditioning - A review of technologies and strategies , 2013 .

[38]  Wenming Yang,et al.  Numerical simulation of a novel energy-efficient dew-point evaporative air cooler , 2014 .

[39]  Ruzhu Wang,et al.  Performance of two-stage rotary desiccant cooling system with different regeneration temperatures , 2015 .

[40]  Sergey Anisimov,et al.  Performance investigation of a M (Maisotsenko)-cycle cross-flow heat exchanger used for indirect evaporative cooling , 2014 .

[41]  Andrea Gasparella,et al.  Experimental analysis on desiccant regeneration in a packed column with structured and random packing , 2009 .

[42]  Manuel R. Conde,et al.  Properties of aqueous solutions of lithium and calcium chlorides: formulations for use in air conditioning equipment design , 2004 .

[43]  Refrigerating.  ASHRAE handbook of fundamentals , 1967 .

[44]  Li-Zhi Zhang,et al.  A heat pump driven and hollow fiber membrane-based liquid desiccant air dehumidification system: Modeling and experimental validation , 2014 .

[45]  L. C. S. Mesquita,et al.  Modeling of heat and mass transfer in parallel plate liquid-desiccant dehumidifiers , 2006 .

[46]  K. Y. Qu,et al.  Heat and mass transfer model of cross flow liquid desiccant air dehumidifier/regenerator , 2007 .