论文信息 - Optical fiber current measurement

Optical fiber current measurement

Optical fiber measurement devices offer several important advantages for power system application. Amongst the parameters which may be measured conveniently with optical fiber techniques are current, voltage, temperature and strain/ pressure. Of the various optical fiber devices which have been developed for such measurements, probably the most advanced is that which seeks to measure electric current, and this chapter will review the methods which have been explored in this development.

A. J. Rogers

[1] A. J. Rogers. The electrogyration effect in crystalline quartz , 1977, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.

[2] A. J. Rogers,et al. Optical Measurement of Current and Voltage on Power Systems , 1979 .

[3] A. M. Smith,et al. Optical fibres for current measurement applications , 1980 .

[4] A Papp,et al. Magnetooptical current transformer. 3: Measurements. , 1980, Applied optics.

[5] D. Payne,et al. Miniature multi-turn fibre current sensors , 1987 .

[6] A Papp,et al. Magnetooptical current transformer. 1: Principles. , 1980, Applied optics.

[7] R. Ulrich,et al. Polarization optics of twisted single-mode fibers. , 1979, Applied optics.

[8] S. Rashleigh,et al. Bending-induced birefringence in single-mode fibers. , 1980, Optics letters.

[9] R. Jones. A New Calculus for the Treatment of Optical Systems. IV. , 1942 .

[10] R. Jones. A New Calculus for the Treatment of Optical SystemsI. Description and Discussion of the Calculus , 1941 .

[11] David N. Payne,et al. Production of single-mode fibres with negligible intrinsic birefringence and polarisation mode dispersion , 1981 .

[12] A. M. Smith. Optical Fiber Current Measurement Device At A Generating Station , 1981, Other Conferences.

[13] A. Yariv. Introduction to optical electronics , 1971 .

[14] J. N. Ross. The rotation of the polarization in low birefringence monomode optical fibres due to geometric effects , 1984 .