Non-contact atomic force microscope with a PZT cantilever used for deflection sensing, direct oscillation and feedback actuation

A non-contact atomic force microscope (NC-AFM) based on a microfabricated piezoelectric cantilever is presented. A single piezoelectric lead zirconate titanate thin film layer on the cantilever serves as deflection sensing, cantilever oscillation and feedback actuation. Since such an AFM requires neither external oscillator nor external deflection sensor, considerably simple instrumentation becomes possible even for extreme environments such as low temperature or ultra-high vacuum. Also feedback control by the integrated actuator in the cantilever makes faster scanning possible. Images of atomic steps on annealed sapphire (0001) surfaces have been observed in air atmosphere in frequency modulation mode.

[1]  F. Giessibl,et al.  Atomic Resolution of the Silicon (111)-(7x7) Surface by Atomic Force Microscopy , 1995, Science.

[2]  Toru Fujii,et al.  Effect of poling on piezoelectric properties of lead zirconate titanate thin films formed by sputtering , 1995 .

[3]  Shunji Watanabe,et al.  Micro‐fabricated piezoelectric cantilever for atomic force microscopy , 1996 .

[4]  Todd Sulchek,et al.  High-speed tapping mode imaging with active Q control for atomic force microscopy , 2000 .

[5]  Toru Fujii,et al.  Feedback positioning cantilever using lead zirconate titanate thin film for force microscopy observation of micropattern , 1996 .

[6]  T. Itoh,et al.  Development of a force sensor for atomic force microscopy using piezoelectric thin films , 1993 .

[7]  Calvin F. Quate,et al.  Atomic force microscopy for high speed imaging using cantilevers with an integrated actuator and sensor , 1996 .

[8]  Joseph L. Garbini,et al.  Optimal control of force microscope cantilevers. I. Controller design , 1996 .

[9]  Robert Barrett,et al.  Atomic force microscopy using a piezoresistive cantilever , 1991, TRANSDUCERS '91: 1991 International Conference on Solid-State Sensors and Actuators. Digest of Technical Papers.

[10]  Joseph L. Garbini,et al.  Optimal control of ultrasoft cantilevers for force microscopy , 1998 .

[11]  Tsuyoshi Ohnishi,et al.  Atomic‐scale formation of ultrasmooth surfaces on sapphire substrates for high‐quality thin‐film fabrication , 1995 .

[12]  Jerome Mertz,et al.  Regulation of a microcantilever response by force feedback , 1993 .

[13]  Self-oscillating mode for frequency modulation noncontact atomic force microscopy , 1997 .

[14]  Harald Fuchs,et al.  Analysis of the interaction mechanisms in dynamic mode SFM by means of experimental data and computer simulation , 1998 .

[15]  Toru Fujii,et al.  Application of lead zirconate titanate thin film displacement sensors for the atomic force microscope , 1995 .

[16]  Stefano Carabelli,et al.  Lead zirconate titanate cantilever for noncontact atomic force microscopy , 1999 .

[17]  N. D. Rooij,et al.  Scanning force microscopy in the dynamic mode using microfabricated capacitive sensors , 1996 .