3-D Printed Slotted Spherical Resonator Bandpass Filters With Spurious Suppression

In this paper, a third-order waveguide bandpass filter (BPF) based on slotted spherical resonators with a wide spurious-free stopband is presented. The resonator consists of a spherical cavity with slots opened at the top and bottom. Compared with a non-slotted spherical resonator, the slotted resonator suppresses the two spurious modes (TM211 and TE101) whilst maintaining the fundamental TM101 mode. The unloaded quality factor of the TM101 mode is not significantly degraded. This is achieved by interrupting surface current and radiating the unwanted spurious modes with the slots. The BPF is designed at a center frequency of 10 GHz with a fractional bandwidth of 1%. Two filter prototypes are fabricated, one using metal-based selective laser melting (SLM) and the other by polymer-based stereolithography apparatus (SLA) techniques. The slots also facilitate the copper electroplating process for the SLA-printed filter. The measured results show that the average passband insertion losses of the SLM- and SLA-printed filters are 0.33 and 0.2 dB, respectively. The corresponding passband return losses are better than 22 and 20 dB. The filters demonstrate excellent passband performance and wide spurious-free stopbands up to 16 GHz with stopband rejections of over 20 dB.

[1]  J. Fuh,et al.  Study on Shrinkage Behaviour of Direct Laser Sintering Metallic Powder , 2006 .

[2]  Keqian Zhang,et al.  Electromagnetic Theory for Microwaves and Optoelectronics , 2007 .

[3]  Wei Xu,et al.  A Compact 16-Way High-Power Combiner Implemented Via 3-D Metal Printing Technique for Advanced Radio-Frequency Electronics System Applications , 2019, IEEE Transactions on Industrial Electronics.

[4]  Roberto Mizzoni,et al.  Enhanced Topology of $E$-Plane Resonators for High-Power Satellite Applications , 2015, IEEE Transactions on Microwave Theory and Techniques.

[5]  Fan Zhang,et al.  A Lightweight 3-D Printed $X$-Band Bandpass Filter Based on Spherical Dual-Mode Resonators , 2016, IEEE Microwave and Wireless Components Letters.

[6]  Elena Valles Lluch,et al.  Realising advanced waveguide bandpass filters using additive manufacturing , 2017 .

[7]  R. Tascone,et al.  Integration of an $H$ -Plane Bend, a Twist, and a Filter in Ku/K-Band Through Additive Manufacturing , 2018, IEEE Transactions on Microwave Theory and Techniques.

[8]  Cheng Guo,et al.  $W$ -Band Waveguide Filters Fabricated by Laser Micromachining and 3-D Printing , 2016, IEEE Transactions on Microwave Theory and Techniques.

[9]  Giuseppe Virone,et al.  Additive Manufacturing of Ka-Band Dual-Polarization Waveguide Components , 2018, IEEE Transactions on Microwave Theory and Techniques.

[10]  S. Amari,et al.  Application of Representation Theory to Dual-Mode Microwave Bandpass Filters , 2009, IEEE Transactions on Microwave Theory and Techniques.

[11]  Roberto Sorrentino,et al.  3-D-Printed Quasi-Elliptical Evanescent Mode Filter Using Mixed Electromagnetic Coupling , 2018, IEEE Microwave and Wireless Components Letters.

[12]  Oscar Antonio Peverini,et al.  Additive manufacturing of Ku/K-band waveguide filters: a comparative analysis among selective-laser melting and stereo-lithography , 2017 .

[13]  Cheng Guo,et al.  Ceramic filled resin based 3D printed X-band dual-mode bandpass filter with enhanced thermal handling capability , 2016 .

[14]  Paul Booth,et al.  Enhancing the Performance of Waveguide Filters Using Additive Manufacturing , 2017, Proceedings of the IEEE.

[15]  Guan-Long Huang,et al.  Monolithically 3-D Printed Hemispherical Resonator Waveguide Filters With Improved Out-of-Band Rejections , 2018, IEEE Access.

[16]  Jia-Sheng Hong,et al.  Microstrip filters for RF/microwave applications , 2001 .

[17]  Tomislav Debogovic,et al.  Polymer-Based Additive Manufacturing of High-Performance Waveguide and Antenna Components , 2017, Proceedings of the IEEE.

[18]  Chow-Yen-Desmond Sim,et al.  Lightweight Perforated Waveguide Structure Realized by 3-D Printing for RF Applications , 2017, IEEE Transactions on Antennas and Propagation.

[19]  J. Rhodes,et al.  Asymmetric Realisations for Dual-Mode Bandpass Filters , 1980, 1980 IEEE MTT-S International Microwave symposium Digest.

[20]  C. M. Cheah,et al.  Influence of process parameters on stereolithography part shrinkage , 1996 .

[21]  G. Craven,et al.  The Design of Evanescent Mode Waveguide Bandpass Filters for a Prescribed Insertion Loss Characteristic , 1971 .

[22]  Jun Xu,et al.  A 3-D Printed Lightweight X-Band Waveguide Filter Based on Spherical Resonators , 2015, IEEE Microwave and Wireless Components Letters.