Improvements in power quality and efficiency with a new AC/DC high current converter

A very flexible AC/DC converter featuring high-output current, reduced voltage ripple and highly adjustable current control is described. The whole system consists of four stages and uses a proper switching technique in conjunction with a feedback control performed by means of a PID regulator. Moreover, the built prototype exhibits high efficiency and reduced harmonic pollution. In order to evaluate the harmonic distortion on the current drawn from the supply network, an FFT (Fast Fourier Transform) analysis is performed. Finally, experimental and computation results for output currents up to 400A, which confirm the correct behavior of the proposed converter, are presented and discussed.

[1]  M.N.S. Swamy,et al.  Vector computation of the discrete Fourier transform , 1998 .

[2]  Zitao Wang,et al.  PWM AC/DC boost converter system for induction generator in variable-speed wind turbines , 2005, Canadian Conference on Electrical and Computer Engineering, 2005..

[3]  B. Lin,et al.  Single-phase neutral point clamped AC/DC converter with the function of power factor corrector and active filter , 2002 .

[4]  Markus Püschel,et al.  Cooley-Tukey FFT like algorithms for the DCT , 2003, ICASSP.

[5]  Bor-Ren Lin,et al.  Single-phase converter with flying capacitor topology , 2004, 2004 IEEE Region 10 Conference TENCON 2004..

[6]  J. Mahdavi,et al.  Conducted electromagnetic emissions in unity power factor AC/DC converters: comparison between PWM and RPWM techniques , 1999, 30th Annual IEEE Power Electronics Specialists Conference. Record. (Cat. No.99CH36321).

[7]  Douglas L. Jones,et al.  Real-valued algorithms for the FFT , 1987, ICASSP '87. IEEE International Conference on Acoustics, Speech, and Signal Processing.

[8]  C. Neumeyer,et al.  Synchronous rectifier using power-MOSFET for high current AC/DC converter system , 2002, Proceedings of the 19th IEEE/IPSS Symposium on Fusion Engineering. 19th SOFE (Cat. No.02CH37231).

[9]  Fred C. Lee,et al.  Voltage and current stress reduction in single-stage power factor correction AC/DC converters with bulk capacitor voltage feedback , 2002 .

[10]  Francesco Muzi,et al.  A real-time monitoring and diagnostic procedure for electrical distribution networks , 2007 .

[11]  Paolo Mattavelli Design aspects of harmonic filters for high-power AC/DC converters , 2000, 2000 Power Engineering Society Summer Meeting (Cat. No.00CH37134).

[12]  A.N. Segura,et al.  Experimental measurement of non-characteristic harmonic power generated by thyristor pulse-controlled AC/DC three phase converters , 1996, Proceedings of IEEE International Symposium on Industrial Electronics.

[13]  S. Wu,et al.  A study on doubly-fed induction machine with bi-directional AC/DC/AC converter , 2004, 39th International Universities Power Engineering Conference, 2004. UPEC 2004..

[14]  Hsiang-Yu Hsu,et al.  Simple Digital-Controlled AC/DC Converter with Power Factor Correction for Universal Input Applications , 2007, IECON 2007 - 33rd Annual Conference of the IEEE Industrial Electronics Society.

[15]  Francesco Muzi,et al.  A real-time prediction procedure of the state of an electrical distribution system , 2007 .

[16]  P. Sicard,et al.  Probabilistic models of harmonic currents produced by twelve-pulse AC/DC converters , 2004, IEEE Transactions on Power Delivery.

[17]  S. Saponara,et al.  Cost-effective design of AC/DC converter with programmable power amplification , 2004, 2004 IEEE International Conference on Industrial Technology, 2004. IEEE ICIT '04..

[18]  Francesco Muzi,et al.  Diagnostics of electric power components: An improvement on signal discrimination , 2005 .

[19]  M.N.S. Swamy,et al.  Vector computation of the discrete Fourier transform , 1999 .

[20]  Michael G. Egan,et al.  A new modulation strategy for a buck-boost input AC/DC converter , 2001 .

[21]  I. D. Lu,et al.  Use of mixed radix FFT in electric power system studies , 1994 .

[22]  F. Muzi A new digital power conditioner to improve quality and safety in electrical distribution systems , 2004, IEEE Power Engineering Society General Meeting, 2004..