MWCNT-supported phthalocyanine cobalt as air-breathing cathodic catalyst in glucose/O2 fuel cells

Abstract Simple and highly efficient glucose fuel cells using abiotic catalysts and different ion exchange membranes were designed. The glucose fuel cells are based on a multi-walled carbon nanotube (MWCNT)-supported cobalt phthalocyanine (CoPc) cathode and a carbon black/platinum (C/Pt) anode. The electrocatalytic activity of the MWCNT/CoPc electrode for oxygen reduction was investigated by cyclic and linear sweep voltammetry. The electrochemical experiments show that CoPc exhibits promising catalytic properties for oxygen reduction due to its high overpotential and efficiency at reduced metal load. The MWCNT/CoPc electrodes were applied to the oxygen reduction reaction as air-breathing cathode in a single-chambered glucose fuel cell. This cathode was associated with a C/Pt anode in fuel cell configurations using either an anion (Nafion ® ) or a cation (Tokuyama) exchange membrane. The best fuel cell configuration delivered a maximum power density of 2.3 mW cm −2 and a cell voltage of 0.8 V in 0.5 M KOH solution containing 0.5 M glucose using the Tokuyama membrane at ambient conditions. Beside the highest power density per cathodic catalyst mass (383 W g −1 ), these glucose fuel cells exhibit a high operational stability, delivering 0.3 mW cm −2 after 50 days.

[1]  H. Tamon,et al.  Direct synthesis of carbon nanotubes on stainless steel electrode for enhanced catalyst efficiency in a glucose fuel cell , 2013 .

[2]  C. Zhao,et al.  Output Current Increase in Alkaline Glucose Fuel Cells , 2011 .

[3]  T. Zhao,et al.  Alkaline direct oxidation fuel cell with non-platinum catalysts capable of converting glucose to electricity at high power output , 2011 .

[4]  R. Brodd,et al.  Electrode Materials and Catalysts for Oxygen Reduction in Isotonic Saline Solution , 1970 .

[5]  Lucy L. Deng,et al.  Alkaline direct oxidation glucose fuel cell system using silver/nickel foams as electrodes , 2012 .

[6]  Roland Zengerle,et al.  Energy harvesting by implantable abiotically catalyzed glucose fuel cells , 2008 .

[7]  S. Rowshanzamir,et al.  Review of the proton exchange membranes for fuel cell applications , 2010 .

[8]  S. Basu,et al.  A study on direct glucose and fructose alkaline fuel cell , 2010 .

[9]  M. J. Kelly,et al.  Direct Glucose Fuel Cell: Noble Metal Catalyst Anode Polymer Electrolyte Membrane Fuel Cell with Glucose Fuel , 2010 .

[10]  S. Cosnier,et al.  Electrocatalytic oxidation of glucose by rhodium porphyrin-functionalized MWCNT electrodes: application to a fully molecular catalyst-based glucose/O2 fuel cell. , 2012, Journal of the American Chemical Society.

[11]  Robert B. Moore,et al.  State of understanding of nafion. , 2004, Chemical reviews.

[12]  F. Walsh,et al.  Ionic Conductivity of an Extruded Nafion 1100 EW Series of Membranes , 2002 .

[13]  K. Yasuda,et al.  Electrochemical oxidation of sugars at moderate potentials catalyzed by Rh porphyrins. , 2010, Chemical communications.

[14]  R. Zengerle,et al.  A potentially implantable glucose fuel cell with Raney-platinum film electrodes for improved hydrolytic and oxidative stability , 2011 .

[15]  K. Yasuda,et al.  Nonenzymatic glucose fuel cells with an anion exchange membrane as an electrolyte , 2009 .

[16]  A. Shukla,et al.  Nafion and modified-Nafion membranes for polymer electrolyte fuel cells: An overview , 2009 .