Conformal dip-coating of patterned surfaces for capillary die-to-substrate self-assembly

Capillarity-driven self-assembly of small chips onto planar target substrates is a promising alternative to robotic pick-and-place assembly. It critically relies on the selective deposition of thin fluid films on patterned binding sites, which is anyway normally non-conformal. We found that the addition of a thin wetting sidewall, surrounding the entire site perimeter, enables the conformal fluid coverage of arbitrarily shaped sites through dip-coating, significantly improves the reproducibility of the coating process and strongly reduces its sensitivity to surface defects. In this paper we support the feasibility and potential of this method by demonstrating the conformal dip-coating of square and triangular sites conditioned with combinations of different hydrophobic and hydrophilic surface chemistries. We present both experimental and simulative evidence of the advantages brought by the introduction of the wetting boundary on film coverage accuracy. Application of our surface preparation method to capillary self-assembly could result in higher precision in die-to-substrate registration and larger freedom in site shape design.

[1]  Rashid Bashir,et al.  Electric-Field-Mediated Assembly of Silicon Islands Coated with Charged Molecules , 2002 .

[2]  George M. Whitesides,et al.  Beyond molecules: Self-assembly of mesoscopic and macroscopic components , 2002, Proceedings of the National Academy of Sciences of the United States of America.

[3]  Xiaorong Xiong,et al.  Towards optimal designs for self-alignment in surface tension driven micro-assembly , 2004, 17th IEEE International Conference on Micro Electro Mechanical Systems. Maastricht MEMS 2004 Technical Digest.

[4]  B. Yellen,et al.  Programmable Assembly of Heterogeneous Colloidal Particle Arrays , 2004 .

[5]  P.D. Swanson,et al.  Electric field directed assembly of an InGaAs LED onto silicon circuitry , 2000, IEEE Photonics Technology Letters.

[6]  G. Whitesides,et al.  Fabricating large arrays of microwells with arbitrary dimensions and filling them using discontinuous dewetting. , 1998, Analytical chemistry.

[7]  Self-assembly of MEMS components in air assisted by diaphragm agitation , 2005, 18th IEEE International Conference on Micro Electro Mechanical Systems, 2005. MEMS 2005..

[8]  G. Whitesides,et al.  Self-assembled monolayers of thiolates on metals as a form of nanotechnology. , 2005, Chemical reviews.

[9]  Kaiji Sato,et al.  Self-Alignment and Bonding of Microparts Using Adhesive Droplets , 2007 .

[10]  George M. Whitesides,et al.  Three-dimensional self-assembly of millimetre-scale components , 1997, Nature.

[11]  Babak A. Parviz,et al.  Self-assembled single-crystal silicon circuits on plastic , 2006, Proceedings of the National Academy of Sciences.

[12]  G. Whitesides,et al.  Using finite element analysis to calculate the shapes of geometrically confined drops of liquid on patterned, self-assembled monolayers: a new method to estimate excess interfacial free energies .gamma.sv - .gamma.sl , 1994 .

[13]  Jennifer S. Smith,et al.  Fluidic self-assembly of silicon microstructures , 1995, 1995 Proceedings. 45th Electronic Components and Technology Conference.

[14]  D. Arnold,et al.  Self-Assembly of Millimeter-Scale Components Using Integrated Micromagnets , 2008, IEEE Transactions on Magnetics.

[15]  Akira Shimokohbe,et al.  Self-alignment of microparts using liquid surface tension—behavior of micropart and alignment characteristics , 2003 .

[16]  A. Ludwig.  Modeling , Simulation , and Experimentation of a Promising New Packaging Technology : Parallel Fluidic Self-Assembly of Microdevices , 2003 .

[17]  Karl-Friedrich Böhringer,et al.  Geometric binding site design for surface-tension driven self-assembly , 2004, IEEE International Conference on Robotics and Automation, 2004. Proceedings. ICRA '04. 2004.

[18]  Lewis S. Goldmann,et al.  Geometric optimization of controlled collapse interconnections , 1969 .

[19]  Leonard S. Goodman.  Geometric optimization of controlled collapse interconnections , 1969 .

[20]  Yutaka Ohno,et al.  Direct integration of GaAs HEMTs on AlN ceramic substrates using fluidic self-assembly , 2005 .

[21]  Dominiek Reynaerts,et al.  Assembly of Microsystems , 2000 .

[22]  Glen McHale,et al.  Drop evaporation on solid surfaces: constant contact angle mode , 2002 .

[23]  George M. Whitesides,et al.  Millimeter-scale self-assembly and its applications , 2003 .

[24]  Ronald S. Fearing,et al.  Survey of sticking effects for micro parts handling , 1995, Proceedings 1995 IEEE/RSJ International Conference on Intelligent Robots and Systems. Human Robot Interaction and Cooperative Robots.

[25]  J. Israelachvili,et al.  Recent progress in understanding hydrophobic interactions , 2006 .

[26]  L. Landau,et al.  Dragging of a Liquid by a Moving Plate , 1988 .

[27]  George M. Whitesides,et al.  Self-Organization of Organic Liquids on Patterned Self-Assembled Monolayers of Alkanethiolates on Gold , 1994 .

[28]  Qasem Ramadan,et al.  Large scale microcomponents assembly using an external magnetic array , 2007 .

[29]  H. Yeh,et al.  Fluidic self-assembly for the integration of GaAs light-emitting diodes on Si substrates , 1994, IEEE Photonics Technology Letters.

[30]  Rashid Bashir,et al.  Dielectrophoresis and electrohydrodynamics-mediated fluidic assembly of silicon resistors , 2003 .

[31]  K. L. Scott,et al.  High-performance inductors using capillary based fluidic self-assembly , 2004, Journal of Microelectromechanical Systems.

[32]  J. S. Smith.  High density, low parasitic direct integration by fluidic self assembly (FSA) , 2000, International Electron Devices Meeting 2000. Technical Digest. IEDM (Cat. No.00CH37138).

[33]  Tien,et al.  Forming electrical networks in three dimensions by self-assembly , 2000, Science.

[34]  J. S. Smith,et al.  Fluidic self-assembly of microstructures and its application to the integration of GaAs on Si , 1994, Proceedings IEEE Micro Electro Mechanical Systems An Investigation of Micro Structures, Sensors, Actuators, Machines and Robotic Systems.

[35]  R. Howe,et al.  Fluidic self-assembly of micromirrors onto microactuators using capillary forces , 2002 .

[36]  J. M. Noworolski,et al.  Microassembly technologies for MEMS , 1998, Photonics West - Micro and Nano Fabricated Electromechanical and Optical Components.

[37]  R. Howe,et al.  Microstructure to substrate self-assembly using capillary forces , 2001 .

[38]  G. Whitesides,et al.  Self-Assembly at All Scales , 2002, Science.

[39]  Roya Maboudian,et al.  Stability of ammonium fluoride‐treated Si(100) , 1995 .

[40]  T. Fukuda,et al.  Adhesion forces reduction for micro manipulation based on micro physics , 1996, Proceedings of Ninth International Workshop on Micro Electromechanical Systems.

[41]  J. Tu,et al.  Fluidic self-assembly of InGaAs vertical cavity surface emitting lasers onto silicon , 1995 .

[42]  Lenz,et al.  Liquid morphologies on structured surfaces: from microchannels to microchips , 1999, Science.

[43]  Sang Woo Lee,et al.  Dielectrophoresis and Chemically Mediated Directed Self‐Assembly of Micrometer‐Scale Three‐Terminal Metal Oxide Semiconductor Field‐Effect Transistors , 2005 .

[44]  Jaehoon Chung,et al.  Programmable reconfigurable self-assembly: parallel heterogeneous integration of chip-scale components on planar and nonplanar surfaces , 2006, Journal of Microelectromechanical Systems.

[45]  Sigurd Wagner,et al.  Selective dip-coating of chemically micropatterned surfaces , 2000 .

[46]  Jan G. Korvink,et al.  Capillary Forces in Micro-Fluidic Self-Assembly , 2002 .

[47]  G. Whitesides,et al.  Fabrication of a Cylindrical Display by Patterned Assembly , 2002, Science.

[48]  S. Esener,et al.  Optimization and theoretical modeling of polymer microlens arrays fabricated with the hydrophobic effect. , 2001, Applied optics.

[49]  C. Brinker,et al.  Free-Meniscus Coating Processes , 1997 .

[50]  Kenneth A. Brakke,et al.  The Surface Evolver , 1992, Exp. Math..

[51]  R. Howe,et al.  Modeling of capillary forces and binding sites for fluidic self-assembly , 2001, Technical Digest. MEMS 2001. 14th IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.01CH37090).

[52]  Alan O'Riordan,et al.  Field Configured Assembly: Programmed Manipulation and Self-assembly at the Mesoscale , 2004 .

[53]  Wei Zheng,et al.  Fluidic heterogeneous microsystems assembly and packaging , 2006, Journal of Microelectromechanical Systems.

[54]  Jan G. Korvink,et al.  Modeling, Simulation, and Experimentation of a Promising New Packaging Technology: Parallel Fluidic Self-Assembly of Microdevices , 2003 .

[55]  Jiandong Fang,et al.  Controlled multibatch self-assembly of microdevices , 2003 .

[56]  Jiandong Fang,et al.  Self-assembly of PZT actuators for micropumps with high process repeatability , 2006, Journal of Microelectromechanical Systems.