On the Burst Strength Capacity of an Aging Subsea Gas Pipeline

Precise evaluation of the performance of aging structures is particularly essential in the oil and gas industry, where inaccurate predictions of structural performance may lead to significantly hazardous consequences. It is also important to accurately predict the corrosion behavior of pipeline structures used in the production of gas in subsea areas. The effects of pipeline failure due to a significant reduction in burst strength make it hard for pipeline operators to maintain pipeline serviceability. Therefore, the serviceability of ongoing subsea gas pipelines should be assessed according to their burst strength capacities, which should not exceed the maximum allowable operating pressure (MAOP). In this study, the critical part of the corrosion along a 2.4 km pipeline was evaluated using two approaches: an empirical design codes formula and Ansys numerical analysis. The future integrity of the aging pipeline was then assessed to predict its remaining years of service. The results and outcomes of this study will be useful in evaluating pipeline integrity and predicting the remaining service life of aging pipeline structures.

[1]  Shan Huang,et al.  Wave loading fatigue reliability and uncertainty analyses for geotechnical pipeline models , 2014 .

[2]  M. Ahammed,et al.  Probabilistic estimation of remaining life of a pipeline in the presence of active corrosion defects , 1998 .

[3]  Robert E. Melchers,et al.  Statistical Characterization of Pitting Corrosion—Part 1: Data Analysis , 2005 .

[4]  Jong-Hyun Baek,et al.  Ductile failure analysis of API X65 pipes with notch-type defects using a local fracture criterion , 2007 .

[5]  Robert E. Melchers,et al.  Mathematical modelling of the diffusion controlled phase in marine immersion corrosion of mild steel , 2003 .

[6]  Segen F. Estefen,et al.  The effect of corrosion defects on the burst pressure of pipelines , 2005 .

[7]  Claudio Ruggieri,et al.  Failure assessments of corroded pipelines with axial defects using stress-based criteria: Numerical studies and verification analyses , 2009 .

[8]  Tarek A. Elsayed,et al.  Reliability of subsea pipelines against lateral instability , 2012 .

[9]  Francisco Caleyo,et al.  A study on the reliability assessment methodology for pipelines with active corrosion defects , 2002 .

[10]  Mahesh D. Pandey,et al.  Probabilistic models for condition assessment of oil and gas pipelines , 1998 .

[11]  M. Langseth,et al.  The behaviour of an offshore steel pipeline material subjected to bending and stretching , 2012 .

[12]  Robert E. Melchers,et al.  Reliability estimation of pressurised pipelines subject to localised corrosion defects , 1996 .

[13]  Chen Guo-hua,et al.  Study on the reliability assessment methodology for pressure vessels containing defects , 1996 .

[14]  Robert E. Melchers,et al.  Probabilistic analysis of pipelines subjected to pitting corrosion leaks , 1995 .

[15]  Jeom Kee Paik,et al.  A time-variant corrosion wastage model for subsea gas pipelines , 2014 .

[16]  Robert G. Sexsmith,et al.  Probability-based safety analysis — value and drawbacks , 1999 .

[17]  R. Melchers.  The effect of corrosion on the structural reliability of steel offshore structures , 2005 .

[18]  F. J. Klever,et al.  New developments in burst strength predictions for locally corroded pipelines , 1995 .

[19]  C. Guedes Soares,et al.  Reliability of pipelines with corrosion defects , 2008 .

[20]  Robert E. Melchers,et al.  Statistical Characterization of Pitting Corrosion—Part 2: Probabilistic Modeling for Maximum Pit Depth , 2005 .

[21]  Jian-Hua Li,et al.  Predicting corrosion remaining life of underground pipelines with a mechanically-based probabilistic model , 2009 .

[22]  Yong Bai,et al.  Asymmetric collapse of offshore pipelines under external pressure , 2013 .

[23]  Robert E. Melchers,et al.  Probabilistic analysis of underground pipelines subject to combined stresses and corrosion , 1997 .

[24]  Krzysztof Kołowrocki.  On applications of asymptotic reliability functions to the reliability and risk evaluation of pipelines , 1998 .

[25]  Z. R. Yang,et al.  Damage assessment in pipeline structures using modal parameter , 2006 .