Final Report: Compliant Thermo- Mechanical MEMS Actuators LDRD #52553

Thermal actuators have proven to be a robust actuation method in surface-micromachined MEMS processes. Their higher output force and lower input voltage make them an attractive alternative to more traditional electrostatic actuation methods. A predictive model of thermal actuator behavior has been developed and validated that can be used as a design tool to customize the performance of an actuator to a specific application. This tool has also been used to better understand thermal actuator reliability by comparing the maximum actuator temperature to the measured lifetime. Modeling thermal actuator behavior requires the use of two sequentially coupled models, the first to predict the temperature increase of the actuator due to the applied current and the second to model the mechanical response of the structure due to the increase in temperature. These two models have been developed using Matlab for the thermal response and ANSYS for the structural response. Both models have been shown to agree well with experimental data. In a parallel effort, the reliability and failure mechanisms of thermal actuators have been studied. Their response to electrical overstress and electrostatic discharge has been measured and a study has been performed to determine actuator lifetime at various temperatures and operatingmore » conditions. The results from this study have been used to determine a maximum reliable operating temperature that, when used in conjunction with the predictive model, enables us to design in reliability and customize the performance of an actuator at the design stage.« less

[1]  Victor M. Bright,et al.  Applications for surface-micromachined polysilicon thermal actuators and arrays , 1997 .

[2]  L. L. Chu,et al.  Bent-beam electrothermal actuators-Part II: Linear and rotary microengines , 2001 .

[3]  S. Huet,et al.  Crystal size and temperature measurements in nanostructured silicon using Raman spectroscopy , 2001 .

[4]  Brian D. Jensen,et al.  Interferometry of actuated microcantilevers to determine material properties and test structure nonidealities in MEMS , 2001 .

[5]  Danelle M. Tanner,et al.  Development of characterization tools for reliability testing of micro-electro-mechanical system actuators , 1999, Photonics West - Micro and Nano Fabricated Electromechanical and Optical Components.

[6]  Y. Gianchandani,et al.  Pulse and DC operation lifetimes of bent-beam electrothermal actuators , 2001, Technical Digest. MEMS 2001. 14th IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.01CH37090).

[7]  Y. Gianchandani,et al.  Bent-beam electrothermal actuators-Part I: Single beam and cascaded devices , 2001 .

[8]  A. S. Grove,et al.  General Relationship for the Thermal Oxidation of Silicon , 1965 .

[9]  Danelle M. Tanner,et al.  First reliability test of a surface-micromachined microengine using SHiMMeR , 1997, Photonics West - Micro and Nano Fabricated Electromechanical and Optical Components.

[10]  References , 1971 .

[11]  Y. Gianchandani,et al.  Bent-beam electro-thermal actuators for high force applications , 1999, Technical Digest. IEEE International MEMS 99 Conference. Twelfth IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.99CH36291).

[12]  Hal G. Moore,et al.  A first course in linear algebra with applications , 1998 .

[13]  Yasumasa Okada,et al.  Precise determination of lattice parameter and thermal expansion coefficient of silicon between 300 and 1500 K , 1984 .

[14]  Mu Chiao,et al.  Electrothermal responses of lineshape microstructures , 1996 .

[15]  Neville K. S. Lee,et al.  Analysis and design of polysilicon thermal flexure actuator , 1999 .

[16]  Ronald Paul Manginell.  Polycrystalline-silicon microbridge combustible gas sensor , 1997 .

[17]  Y. Gianchandani,et al.  Reliability studies of bent-beam electro-thermal actuators , 2000, 2000 IEEE International Reliability Physics Symposium Proceedings. 38th Annual (Cat. No.00CH37059).

[18]  Victor M. Bright,et al.  Average power control and positioning of polysilicon thermal actuators , 1999 .

[19]  W. R. Thurber,et al.  Bridge and van der Pauw Sheet Resistors for Characterizing the Line Width of Conducting Layers , 1978 .

[20]  L. Ley,et al.  The one phonon Raman spectrum in microcrystalline silicon , 1981 .

[21]  Timothy W. McLain,et al.  Modeling the thermal behavior of a surface-micromachined linear-displacement thermomechanical microactuator , 2002 .

[22]  L. L. Chu,et al.  Performance enhancement of polysilicon electrothermal microactuators by localized self-annealing , 2003, The Sixteenth Annual International Conference on Micro Electro Mechanical Systems, 2003. MEMS-03 Kyoto. IEEE.

[23]  Larry L. Howell,et al.  Surface micromachined force gauges: uncertainty and reliability , 2002 .

[24]  M. A. Michalicek,et al.  Characterization of electrothermal actuators and arrays fabricated in a four-level, planarized surface-micromachined polycrystalline silicon process , 1997, Proceedings of International Solid State Sensors and Actuators Conference (Transducers '97).

[25]  T. R. Hart,et al.  Temperature Dependence of Raman Scattering in Silicon , 1970 .

[26]  John H. Comtois,et al.  Electrothermal actuators fabricated in four-level planarized surface micromachined polycrystalline silicon , 1997 .