Sacrificial wafer bonding for planarization after very deep etching

A technique is presented that provides planarization after a very deep etching step in silicon. This offers the possibility for not only resist spinning and layer patterning but also for realization of bridges and cantilevers across deep grooves or holes. The technique contains a standard dry film lamination step to cover a wafer with a 38 mu m thick foil. Next the foil is etched back to the desired thickness of a few micrometres. This thin film facilitates resist spinning and high-resolution patterning. The planarization method is demonstrated by the fabrication of aluminium bridges across a deep groove in silicon.

[1]  R. D'agostino.  Plasma deposition, treatment, and etching of polymers , 1990 .

[2]  P. Bergveld,et al.  Polymer bonding of micro-machined silicon structures , 1992, [1992] Proceedings IEEE Micro Electro Mechanical Systems.

[3]  Michael Curt Elwenspoek,et al.  Membranes fabricated with a deep single corrugation for package stress reduction and residual stress relief , 1993 .

[4]  J. Fluitman,et al.  Low temperature sacrificial wafer bonding for planarization after very deep etching , 1994, Proceedings IEEE Micro Electro Mechanical Systems An Investigation of Micro Structures, Sensors, Actuators, Machines and Robotic Systems.

[5]  S. D. Collins,et al.  Micromachined packaging for chemical microsensors , 1988 .

[6]  J. Berenschot,et al.  Planarization and fabrication of bridges across deep grooves or holes in silicon using a dry film photoresist followed by an etch back , 1995 .

[7]  J. Fluitman,et al.  A survey on the reactive ion etching of silicon in microtechnology , 1996 .

[8]  Johannes G.E. Gardeniers,et al.  New applications of R.F.-sputtered glass films as protection and bonding layers in silicon micromachining , 1994 .

[9]  S. Kawahito,et al.  Micromachined solenoids for highly sensitive magnetic sensors , 1991, TRANSDUCERS '91: 1991 International Conference on Solid-State Sensors and Actuators. Digest of Technical Papers.

[10]  Jan H. J. Fluitman,et al.  Realization of mechanical decoupling zones for package-stress reduction , 1993 .

[11]  W. Moreau.  Semiconductor Lithography: Principles, Practices, and Materials , 1987 .

[12]  C. J. Mogab,et al.  The Loading Effect in Plasma Etching , 1977 .

[13]  J. R. Mallon,et al.  Silicon fusion bonding for pressure sensors , 1988, IEEE Technical Digest on Solid-State Sensor and Actuator Workshop.