Software for design of experiments and response modelling of cake filtration applications

[1]  Pia Lappalainen,et al.  Socially Competent Leadership - predictors, impacts and skilling in engineering , 2012 .

[2]  Hermann Nirschl,et al.  Optimization of the wash liquor flow rate to improve washing of pre-deliquored filter cakes , 2007 .

[3]  Nina Salmela,et al.  Washing and Dewatering of Different Starches in Pressure Filters , 2006 .

[4]  Bernhard Hoffner,et al.  Washing Processes for Disperse Particulate Systems – Process Spectrum and Aspects for the Process Choice , 2004 .

[5]  R. Wakeman,et al.  Transport processes during electrowashing of filter cakes , 2004 .

[6]  Matti Karvonen,et al.  Convergence in Industry Evolution , 2011 .

[7]  A New Experimental Technique for Determining Local Dispersion Coefficient in Displacement Washing , 2007 .

[8]  Petra Pekkanen.  Delay reduction in courts of justice – possibilities and challenges of process improvement in professional public organizations , 2011 .

[9]  Richard J. Wakeman,et al.  Solid/Liquid Separation: Scale-up of Industrial Equipment , 2006 .

[10]  Mika Sillanpää,et al.  Application of electrokinetic Fenton process for the remediation of soil contaminated with HCB , 2012 .

[11]  Vesa Ruuskanen,et al.  Design Aspects of Megawatt-Range Direct-Driven Permanent MagnetWind Generators , 2011 .

[12]  G. Box,et al.  On the Experimental Attainment of Optimum Conditions , 1951 .

[13]  Heidi Olander,et al.  Formal and informal mechanisms for knowledge protection and sharing , 2011 .

[14]  Antero Putkiranta,et al.  Possibilities and challenges of longitudinal studies in operations management , 2011 .

[15]  Derek B. Purchas,et al.  Solid-liquid Separation Equipment Scale-up , 1977 .

[16]  Sami Jantunen,et al.  Making Sense of Software Product Requirements , 2012 .

[17]  Tatiana Minav,et al.  Electric-drive-based control and electric energy regeneration in a hydraulic system , 2011 .

[18]  Anssi Jääskeläinen,et al.  Integrating user experience into early phases of software development , 2011 .

[19]  Christer Albano,et al.  Empirical modelling of a dewatering process using multivariate data analysis , 1992 .

[20]  Satu Alaoutinen,et al.  Enabling constructive alignment in programming instruction , 2011 .

[21]  Kari Myöhänen,et al.  Modelling of combustion and sorbent reactions in three-dimensional flow environment of a circulating fluidized bed furnace , 2011 .

[22]  J. Edelmann,et al.  EXPERIENCES IN USING A STRUCTURED METHOD IN FINDING AND DEFINING NEW INNOVATIONS: THE STRATEGIC OPTIONS APPROACH , 2011 .

[23]  Maija Hujala,et al.  Structural dynamics in the global pulp and paper industry , 2011 .

[24]  Ari Happonen,et al.  Muuttuvaan kysyntään sopeutuva varastonohjausmalli , 2011 .

[25]  Irina Savitskaya,et al.  Environmental inFluences on the Adoption of Open Innovation: Analysis of Structural, Institutional and Cultural Impacts , 2011 .

[26]  M. Immonen.  Public-Private Partnerships: Managing organizational change for acquiring value creative capabilities , 2011 .

[27]  Paritosh R. Vasava,et al.  Application of Computational Fluid Dynamics in Modeling Blood Flow in Human Thoracic Aorta , 2011 .

[28]  Liisa Puro,et al.  Identification of extractives and polysaccharides as foulants in membrane filtration of pulp and paper mill effluents , 2011 .

[29]  J. C. Liu,et al.  Washing characteristics of copper-containing clay sludge cake , 1999 .

[30]  Y. Ikebe,et al.  Construction of three-level supersaturated design , 1999 .

[31]  F. Rhodes.  Washing in Filtration , 1934 .

[32]  Modelling of displacement washing of packed bed of fibers , 2009 .

[33]  L. Svarovsky,et al.  Solid-Liquid Separation , 2001 .

[34]  Katja Hynynen,et al.  Broadband excitation in the system identification of active magnetic bearing rotor systems , 2011 .

[35]  E. Repo,et al.  EDTA- and DTPA-functionalized silica gel and chitosan adsorbents for the removal of heavy metals from aqueous solutions , 2011 .

[36]  Susan J. Winter,et al.  Network effects: Scale development and implications for new product performance , 2011 .

[37]  Vesa Tanskanen.  CFD Modelling of Direct Contact Condensation in Suppression Pools by Applying Condensation Models of Separated Flow , 2012 .

[38]  P. Tervola.  Fourier series solution for multistage countercurrent cake washing and segregated wash effluent circulation , 2006 .

[39]  Paul Kah,et al.  Usability of laser–arc hybrid welding processes in industrial applications , 2011 .

[40]  Antti Solonen,et al.  Bayesian methods for estimation, optimization and experimental design , 2011 .

[41]  Fatemeh Ebrahimi,et al.  Synthesis of percarboxylic acids in microreactor , 2012 .

[42]  N. Salmela,et al.  Monitoring and modelling of starch cake washing , 2006 .

[43]  Shelly Arora,et al.  Simulation of washing of packed bed of porous particles by orthogonal collocation on finite elements , 2006, Comput. Chem. Eng..

[44]  W. G. Hunter,et al.  Minimum Aberration 2 k–p Designs , 1980 .

[45]  Teemu Kinnunen,et al.  Bag-of-Features Approach to Unsupervised Visual Object Categorisation , 2011 .

[46]  Developing an empirical model for dewatering — And its application to peat , 1989 .

[47]  Mika Sillanpää,et al.  Sewage sludge electro-dewatering , 2011 .

[48]  Matteson,et al.  Filtration: Principles and practices , 1977 .

[49]  J. Vilko.  Approaches to Supply Chain Risk Management: Identification, Analysis and Control , 2012 .

[50]  Jussi Kasurinen,et al.  Software Test Process Development , 2011 .

[51]  Richard D. Braatz,et al.  Experimental design and inferential modeling in pharmaceutical crystallization , 2001 .

[52]  Displacement washing of lime mud: tailing effects , 1996 .

[53]  Jouni Pakarinen,et al.  Recovery and refining of manganese as by-product from hydrometallurgical processes , 2011 .

[54]  Tommi Kääriäinen,et al.  Polymer surface modification by atomic layer deposition , 2011 .

[55]  J. Heinimö.  Developing markets of energy biomass – local and global perspectives , 2011 .

[56]  M. Laatikainen,et al.  Modeling of electrolyte sorption – from phase equilibria to dynamic separation systems , 2011 .

[57]  Per Moldrup,et al.  Filtration and expression of compressible cakes , 1996 .

[58]  Matti Lahti,et al.  Atomic level phenomena on transition metal surfaces , 2011 .

[59]  Richard J. Wakeman,et al.  Filtration : equipment selection, modelling and process simulation , 1999 .

[60]  A. Kochura,et al.  Growth, magnetic and transport properties of InSb and II-IV-As2 semiconductors doped with manganese , 2011 .

[61]  Richard J. Wakeman.  Filtration post-treatment processes , 1975 .

[62]  Rafael Åman,et al.  Methods and Models for Accelerating Dynamic Simulation of Fluid Power Circuits , 2011 .