Diagnostics for plasma control – From ITER to DEMO

The plasma diagnostic and control (D&C) system for a future tokamak demonstration fusion reactor (DEMO) will have to provide reliable operation near technical and physics limits, while its fron ...

[2]  T. Franke,et al.  Conceptual studies of gamma ray diagnostics for DEMO control , 2018, Fusion Engineering and Design.

[3]  Andrea Rizzolo,et al.  R&D on ITER in-vessel magnetic sensors , 2013 .

[4]  J. Contributors,et al.  Deuterium Balmer/Stark spectroscopy and impurity profiles: First results from mirror-link divertor spectroscopy system on the JET ITER-like wall , 2013, 1307.6985.

[5]  Kiyoshi Itami,et al.  ITER diagnostics: Integration and engineering aspects , 2004 .

[6]  C Watts,et al.  Conceptual design of the tangentially viewing combined interferometer-polarimeter for ITER density measurements. , 2013, The Review of scientific instruments.

[7]  C. Kurz,et al.  Density measurements in the edge, divertor and X‐point regions of Alcator C‐Mod from Balmer series emission , 1995 .

[8]  T. Franke,et al.  Integration Concept of the Reflectometry Diagnostic for the Main Plasma in DEMO , 2018, IEEE Transactions on Plasma Science.

[9]  Alfredo Pironti,et al.  Overview of magnetic control in ITER , 2014 .

[10]  Henrik Bindslev,et al.  Chapter 7: Diagnostics , 2007 .

[11]  W. Treutterer,et al.  Divertor power load feedback with nitrogen seeding in ASDEX Upgrade , 2010 .

[12]  N. S. Barnett,et al.  Private communication , 1969 .

[13]  P. Barabaschi,et al.  Fusion electricity: a roadmap to the realization of fusion energy , 2012 .

[14]  M. Kocan,et al.  Development of Bismuth Hall sensors for ITER steady state magnetic diagnostics , 2017 .

[15]  R. Felton,et al.  Diagnostics and control for the steady state and pulsed tokamak DEMO , 2016 .

[16]  T. Fujita,et al.  Chapter 2: Plasma confinement and transport , 2007 .

[17]  F. Felici,et al.  Non-linear model-based optimization of actuator trajectories for tokamak plasma profile control , 2012 .

[18]  K. Tritz,et al.  Multi-energy SXR cameras for magnetically confined fusion plasmas (invited). , 2016, The Review of scientific instruments.

[19]  J. Boedo,et al.  A review of direct experimental measurements of detachment , 2018 .

[20]  A. E. Costley,et al.  Technological challenges of ITER diagnostics , 2005 .

[21]  Russell Feder,et al.  The ITER core imaging x-ray spectrometer , 2010 .

[22]  L. Tatar,et al.  Current status of the design of the ITER bolometer diagnostic , 2017 .

[23]  H. G. Lee,et al.  Design of the ITER VUV edge imaging spectrometer and R&D for the rotary motional vacuum feed-through , 2016 .

[24]  Y. Corre,et al.  The ITER Equatorial Visible/Infra-Red Wide Angle Viewing System: Status of design and R&D , 2015 .

[25]  E. R. Hodgson,et al.  Chapter 12: Generic Diagnostic Issues for a Burning Plasma Experiment , 2008 .

[26]  A. Donné,et al.  Poloidal polarimeter for current density measurements in ITER , 2004 .

[27]  L. Moser,et al.  Towards plasma cleaning of ITER first mirrors , 2015 .

[28]  T. Franke,et al.  Overview of the design approach and prioritization of R&D activities towards an EU DEMO , 2016 .

[29]  Tatsuo Shikama,et al.  Radiation-induced thermoelectric sensitivity (RITES) in ITER prototype magnetic sensors , 2004 .

[30]  A. Costley,et al.  Key issues in ITER diagnostics: Problems and solutions (invited) , 1999 .

[31]  P. Vincenzi,et al.  The physics and technology basis entering European system code studies for DEMO , 2016 .

[32]  Daniele Marocco,et al.  Neutron measurements in ITER using the Radial Neutron Camera , 2012 .

[33]  K. Widmann,et al.  Studies of He‐like krypton for use in determining electron and ion temperatures in very‐high‐temperature plasmas , 1995 .

[34]  Rosaria Villari,et al.  Neutronic performance issues of the breeding blanket options for the European DEMO fusion power plant , 2016 .

[35]  M. Tokar.  Assessment for erosion of and impurity deposition on first mirrors in a fusion reactor , 2018, Nuclear Fusion.

[36]  Wolfgang Biel,et al.  Design overview of the ITER core CXRS fast shutter and manufacturing implications during the detailed design work , 2015 .

[37]  Ronald Wenninger,et al.  DEMO diagnostics and burn control , 2015 .

[38]  B. Esposito,et al.  Design of gamma-ray spectrometers optimized for fast particle studies at ITER. , 2018, The Review of scientific instruments.

[39]  A. W. Morris,et al.  Diagnostics for plasma control on DEMO: challenges of implementation , 2012 .

[40]  D. Mazon,et al.  Design of soft-X-ray tomographic system in WEST using GEM detectors , 2015 .

[41]  S. Kulikov,et al.  Metal Hall sensors for the new generation fusion reactors of DEMO scale , 2017 .

[42]  M. Moszynski,et al.  Conceptual design of the radial gamma ray spectrometers system for α particle and runaway electron measurements at ITER , 2017 .

[43]  A. Donné,et al.  Diagnostic mirrors for ITER: A material choice and the impact of erosion and deposition on their performance , 2007 .

[44]  Gregory V. Brown,et al.  Precision measurement of the K-shell spectrum from highly charged xenon with an array of X-ray calorimeters. , 2009, Physical review letters.