Calibration of a viscoplastic cohesive zone for crazing in PMMA

Abstract In a numerical analysis of mode I fracture in amorphous polymers, Estevez et al. [Estevez R, Tijssens MGA, Van der Giessen E. Modelling of the competition between shear yielding and crazing in glassy polymers. J Mech Phys Solids 2000;48:2585–617] have shown that the material toughness is governed by the competition between the time scales related to shear yielding and crazing. The present study aims at calibrating the parameters involved in this description, for a commercial PMMA. An elastic–viscoplastic constitutive law featuring softening upon yielding and hardening at continued deformation is used for the bulk while crazing is described with a viscoplastic cohesive zone. The three steps of crazing with initiation for a critical stress state, thickening of the craze surfaces and breakdown of the craze fibrils for a critical opening are characterized separately. In particular, it is demonstrated that the use of a viscoplastic cohesive zone is necessary to capture the variation of the toughness with loading rate. For PMMA, the related energy release rate is shown to depend primarily on the craze critical opening and the craze thickening kinetics while craze initiation is of minor importance for the quasi-static loading conditions under consideration here.

[1]  W. Döll.  Optical interference measurements and fracture mechanics analysis of crack tip craze zones , 1983 .

[2]  E. Giessen,et al.  Computational aspects of localized deformations in amorphous glassy polymers , 1996 .

[3]  R. E. Robertson,et al.  The Physics of Glassy Polymers , 1973 .

[4]  S. Basu,et al.  A thermo-mechanical study of mode I, small-scale yielding crack-tip fields in glassy polymers , 2002 .

[5]  E. Giessen,et al.  On Improved Network Models for Rubber Elasticity and Their Applications to Orientation Hardening in Glassy Polymers , 1993 .

[6]  H. Ogawa,et al.  Criterion for craze nucleation in polycarbonate , 1977 .

[7]  P. B. Bowden,et al.  The Yield Behaviour of Glassy Polymers , 1973 .

[8]  Hiroshi Tada,et al.  The stress analysis of cracks handbook , 2000 .

[9]  John Lambros,et al.  Theoretical development and experimental validation of a thermally dissipative cohesive zone model for dynamic fracture of amorphous polymers , 2003 .

[10]  Mary C. Boyce,et al.  Effects of strain rate, temperature and thermomechanical coupling on the finite strain deformation of glassy polymers , 1995 .

[11]  M. Boyce,et al.  Large inelastic deformation of glassy polymers. part I: rate dependent constitutive model , 1988 .

[12]  E. Giessen,et al.  Modeling of crazing using a cohesive surface methodology , 2000 .

[13]  M. Boyce,et al.  A three-dimensional constitutive model for the large stretch behavior of rubber elastic materials , 1993 .

[14]  A. Argon.  A theory for the low-temperature plastic deformation of glassy polymers , 1973 .

[15]  A. Donald,et al.  The mechanism for craze-tip advance in glassy polymers , 1981 .

[16]  S. S. Sternstein,et al.  Inhomogeneous deformation and yielding of glasslike high polymers. , 1968 .

[17]  P. B. Bowden,et al.  A general critical-strain criterion for crazing in amorphous glassy polymers , 1973 .

[18]  S. Timoshenko,et al.  Theory of elasticity , 1975 .

[19]  A. Argon,et al.  Initiation of crazes in polystyrene , 1977 .

[20]  F. A. Myers,et al.  Yielding of glassy polymers in the second quadrant of principal stress space , 1973 .

[21]  V. Giessen,et al.  Modeling and computational analysis of fracture of glassy polymers , 2005 .

[22]  E. Kramer,et al.  Fundamental processes of craze growth and fracture , 1990 .

[23]  E. Kramer.  Microscopic and molecular fundamentals of crazing , 1983 .

[24]  Alojz Ivankovic,et al.  The prediction of dynamic fracture evolution in PMMA using a cohesive zone model , 2005 .

[25]  S. Basu,et al.  Analysis of temperature effects near mode I cracks in glassy polymers , 2005 .

[26]  J. G. Williams,et al.  Fracture of Polymers, Composites and Adhesives , 2000 .

[27]  S. S. Sternstein,et al.  Yield criteria for plastic deformation on glassy high polymers in general stress fields , 1969 .

[28]  van der Erik Giessen,et al.  Modeling of the competition between shear yielding and crazing in glassy polymers , 2000 .