The present and future of additive manufacturing in the aerospace sector: A review of important aspects

This paper reviews recent improvements in additive manufacturing technologies, focusing on those which have the potential to produce and repair metal parts for the aerospace industry. Electron beam melting, selective laser melting and other metal deposition processes, such as wire and arc additive manufacturing, are presently regarded as the best candidates to achieve this challenge. For this purpose, it is crucial that these technologies are well characterised and modelled to predict the resultant microstructure and mechanical properties of the part. This paper presents the state of the art in additive manufacturing and material modelling. While these processes present many advantages to the aerospace industry in comparison with traditional manufacturing processes, airworthiness and air transport safety must be guaranteed. The impact of this regulatory framework on the implementation of additive manufacturing for repair and production of parts for the aerospace industry is presented.

[1]  D. Rosenthal,et al.  The Theory of Moving Sources of Heat and Its Application to Metal Treatments , 1946, Journal of Fluids Engineering.

[2]  C. Gandin,et al.  A three-dimensional cellular automation-finite element model for the prediction of solidification grain structures , 1999 .

[3]  Naoyuki Suzuki,et al.  Analytical solutions for transient temperature of semi-infinite body subjected to 3-D moving heat sources , 1999 .

[4]  Amir Faghri,et al.  Melting of a subcooled mixed powder bed with constant heat flux heating , 1999 .

[5]  Zhengxiao Guo,et al.  Microstructural evolution of a Ti-6Al-4V alloy during thermomechanical processing , 2000 .

[6]  Noboru Kikuchi,et al.  Closed loop direct metal deposition : art to part , 2000 .

[7]  J. Beuth,et al.  The role of process variables in laser-based direct metal solid freeform fabrication , 2001 .

[8]  David W. Rosen,et al.  A process planning method for improving build performance in stereolithography , 2001, Comput. Aided Des..

[9]  Gideon Levy,et al.  RAPID MANUFACTURING AND RAPID TOOLING WITH LAYER MANUFACTURING (LM) TECHNOLOGIES, STATE OF THE ART AND FUTURE PERSPECTIVES , 2003 .

[10]  K. Osakada,et al.  Residual Stress within Metallic Model Made by Selective Laser Melting Process , 2004 .

[11]  Yuwen Zhang,et al.  NUMERICAL SIMULATION OF TWO-DIMENSIONAL MELTING AND RESOLIDIFICATION OF A TWO-COMPONENT METAL POWDER LAYER IN SELECTIVE LASER SINTERING PROCESS , 2004 .

[12]  J. Kruth,et al.  Residual stresses in selective laser sintering and selective laser melting , 2006 .

[13]  J S Tiley,et al.  Additive Manufacturing of Aerospace Alloys for Aircraft Structures , 2006 .

[14]  Hessel Maalderink,et al.  Design for Rapid Manufacturing functional SLS parts , 2006 .

[15]  Rafiq Noorani,et al.  Rapid prototyping : principles and applications , 2006 .

[16]  E. Lavernia,et al.  Numerical modeling of the thermal behavior during the LENS® process , 2006 .

[17]  Robert P. Mudge,et al.  Laser engineered net shaping advances additive manufacturing and repair , 2007 .

[18]  E. Toyserkani,et al.  A 3D dynamic numerical approach for temperature and thermal stress distributions in multilayer laser solid freeform fabrication process , 2007 .

[19]  I. Yadroitsev,et al.  Heat transfer modelling and stability analysis of selective laser melting , 2007 .

[20]  B. Blanpain,et al.  An introduction to phase-field modeling of microstructure evolution , 2008 .

[21]  R. Fischer,et al.  Investigations of MX and γ′/γ″ precipitates in the nickel-based superalloy 718 produced by electron beam melting , 2008 .

[22]  Numerical Simulation of Direct Metal Laser Sintering of Single-Component Powder on Top of Sintered Layers , 2008 .

[23]  J. Schoenung,et al.  Thermal Behavior and Microstructural Evolution during Laser Deposition with Laser-Engineered Net Shaping: Part I. Numerical Calculations , 2008 .

[24]  Julie M. Schoenung,et al.  Thermal Behavior and Microstructure Evolution during Laser Deposition with Laser-Engineered Net Shaping: Part II. Experimental Investigation and Discussion , 2008 .

[25]  R. Fabbro,et al.  Analytical and numerical modelling of the direct metal deposition laser process , 2008 .

[26]  L. Murr,et al.  Microstructure and mechanical behavior of Ti-6Al-4V produced by rapid-layer manufacturing, for biomedical applications. , 2009, Journal of the mechanical behavior of biomedical materials.

[27]  J. K. Chen,et al.  Numerical simulation of laser irradiation to a randomly packed bimodal powder bed , 2009 .

[28]  Luca Facchini,et al.  Microstructure and mechanical properties of Ti‐6Al‐4V produced by electron beam melting of pre‐alloyed powders , 2009 .

[29]  Ryan B. Wicker,et al.  Microstructures and mechanical properties of electron beam-rapid manufactured Ti–6Al–4V biomedical prototypes compared to wrought Ti–6Al–4V , 2009 .

[30]  Tom Craeghs,et al.  A pragmatic model for selective laser melting with evaporation , 2009 .

[31]  Tushar Ramkrishna Mahale,et al.  Electron beam melting of advanced materials and structures. , 2009 .

[32]  David W. Rosen,et al.  Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing , 2009 .

[33]  David W. Rosen,et al.  A Brief History of Additive Manufacturing and the 2009 Roadmap for Additive Manufacturing: Looking Back and Looking Ahead , 2009 .

[34]  H. Fraser,et al.  Effects of process variables and size-scale on solidification microstructure in beam-based fabrication of bulky 3D structures , 2009 .

[35]  Ryan B. Wicker,et al.  Characterization of titanium aluminide alloy components fabricated by additive manufacturing using electron beam melting , 2010 .

[36]  Ingomar Kelbassa,et al.  Laser Additive Manufacturing , 2010 .

[37]  Konrad Wissenbach,et al.  Ductility of a Ti‐6Al‐4V alloy produced by selective laser melting of prealloyed powders , 2010 .

[38]  Michael F. Zäh,et al.  Modelling and simulation of electron beam melting , 2010, Prod. Eng..

[39]  Michael Schmidt,et al.  Towards a universal numerical simulation model for laser material processing , 2010 .

[40]  Milo R. Dorr,et al.  A numerical algorithm for the solution of a phase-field model of polycrystalline materials , 2008, J. Comput. Phys..

[41]  David W. Rosen,et al.  Extrusion-Based Systems , 2010 .

[42]  J. Kruth,et al.  A study of the microstructural evolution during selective laser melting of Ti–6Al–4V , 2010 .

[43]  Manfred Walter,et al.  Rapid manufacturing in the spare parts supply chain: Alternative approaches to capacity deployment , 2010 .

[44]  J. Mazumder,et al.  Laser material processing: Fourth edition , 2010 .

[45]  C. Körner,et al.  Mesoscopic simulation of selective beam melting processes , 2011 .

[46]  Paul A. Colegrove,et al.  Thermo-mechanical analysis of Wire and Arc Additive Layer Manufacturing process on large multi-layer parts , 2011 .

[47]  Matthias Militzer,et al.  Phase field modeling of microstructure evolution in steels , 2011 .

[48]  Piotr Lacki,et al.  Numerical simulation of the electron beam welding process , 2011 .

[49]  Zhi-shui Yu,et al.  Wear behaviors of an (TiB + TiC)/Ti composite coating fabricated on Ti6Al4V by laser cladding , 2011 .

[50]  R. van Gestel,et al.  Service experience with single crystal superalloys for high pressure turbine shrouds , 2011 .

[51]  Yung C. Shin,et al.  Modeling of grain refinement in aluminum and copper subjected to cutting , 2011 .

[52]  Applications of phase field modeling , 2011 .

[53]  Igor Smurov,et al.  Surface Morphology in Selective Laser Melting of Metal Powders , 2011 .

[54]  L. Murr,et al.  Microstructural Architecture, Microstructures, and Mechanical Properties for a Nickel-Base Superalloy Fabricated by Electron Beam Melting , 2011 .

[55]  Ryan B. Wicker,et al.  Novel precipitate–microstructural architecture developed in the fabrication of solid copper components by additive manufacturing using electron beam melting , 2011 .

[56]  Radovan Kovacevic,et al.  Evaluation of titanium alloy fabricated using electron beam melting system for dental applications , 2011 .

[57]  Vicente Amigó,et al.  Laser Cladding of TiC for Better Titanium Components , 2011 .

[58]  Process control and development in wire and arc additive manufacturing , 2012 .

[59]  L. Murr,et al.  Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies , 2012 .

[60]  J. Ding,et al.  Thermo-mechanical analysis of wire and arc additive manufacturing process , 2012 .

[61]  R. Poprawe,et al.  Laser additive manufacturing of metallic components: materials, processes and mechanisms , 2012 .

[62]  Helen Lockett,et al.  Fabrication of geometrical features using wire and arc additive manufacture , 2012 .

[63]  Robert L. Mason,et al.  Fatigue Life of Titanium Alloys Fabricated by Additive Layer Manufacturing Techniques for Dental Implants , 2013, Metallurgical and Materials Transactions A.

[64]  Radovan Kovacevic,et al.  The Coupled CFD-FEM Model of Electron Beam Melting® (EBM) , 2013 .

[65]  Di Wang,et al.  Mechanical properties of a Ti6Al4V porous structure produced by selective laser melting , 2013 .

[66]  M. Boutinguiza,et al.  Processing of pure Ti by rapid prototyping based on laser cladding , 2013, Iberoamerican Meeting of Optics and the Latin American Meeting of Optics, Lasers and Their Applications.

[67]  Michael Schmidt,et al.  Simulation of Laser Beam Melting of Steel Powders using the Three-Dimensional Volume of Fluid Method , 2013 .

[68]  Ryan B. Wicker,et al.  Microstructures of Rene 142 nickel-based superalloy fabricated by electron beam melting , 2013 .

[69]  Critical Assessment of Temperature Distribution in Submerged Arc Welding Process , 2013 .

[70]  H. Brodin,et al.  Mechanical testing of a selective laser melted superalloy , 2013 .

[71]  William E. Frazier,et al.  Metal Additive Manufacturing: A Review , 2014, Journal of Materials Engineering and Performance.

[72]  P. Michaleris.  Modeling metal deposition in heat transfer analyses of additive manufacturing processes , 2014 .

[73]  Brett Lyons,et al.  Additive Manufacturing in Aerospace; Examples and Research Outlook , 2014 .

[74]  J.-P. Kruth,et al.  Microstructure and mechanical properties of a novel β titanium metallic composite by Selective Laser Melting , 2014 .

[75]  Carolin Körner,et al.  Modelling of electron beam absorption in complex geometries , 2014 .

[76]  Esther T. Akinlabi,et al.  Laser Additive Manufacturing , 2016 .