An Accurate Spatial Discretization and Substructural Method With Application to Moving Elevator Cable-Car Systems: Part II—Application

This paper uses the methodology developed in Part I of this work to study the longitudinal, transverse, and their coupled vibrations of moving elevator cable-car systems. A suspension cable is a one-dimensional length-variant distributed-parameter component. When there is only one suspension cable connected to the car, the car is modeled as a point mass. When there are multiple suspension cables, the car is modeled as a rigid body, and the rotation of the car is also included. There are complicated matching conditions between the cable and the car, which cannot be satisfied in the classical assumed modes method, but can be satisfied in the current method. Hence not only the longitudinal and transverse displacements, but also the internal forces/moment, such as the axial force, the bending moment, and the shear force, which are related to the spatial derivatives of the longitudinal and transverse displacements, are accurately calculated. The results from different choices of boundary motions and trial functions are essentially the same, and the convergence is much faster than that of the assumed modes method. The longitudinal-transverse coupled vibrations of a moving cable-car system are also studied using the current method, and the results are compared with those from the linear models. While the result from the linear model for the transverse vibration agrees well with that from the nonlinear coupled model, the axial force from the linear model can significantly differ from that from the nonlinear model when the car approaches the top of the hoistway.Copyright © 2011 by ASME

[1]  D. McIver,et al.  Hamilton's principle for systems of changing mass , 1973 .

[2]  Masatsugu Yoshizawa,et al.  Nonstationary Vibrations of a String with Time-Varying Length and a Mass-Spring Attached at the Lower End , 1997 .

[3]  W. E. Schmitendorf,et al.  Analytical dynamics of discrete systems , 1977 .

[4]  Weidong Zhu,et al.  Vibration of elevator cables with small bending stiffness , 2003 .

[5]  R. Roberts.  Control of high-rise/high-speed elevators , 1998, Proceedings of the 1998 American Control Conference. ACC (IEEE Cat. No.98CH36207).

[6]  Weidong Zhu,et al.  Energetics and Stability of Translating Media with an Arbitrarily Varying Length , 2000 .

[7]  L. Vu-Quoc,et al.  Dynamics of sliding geometrically-exact beams: large angle maneuver and parametric resonance , 1995 .

[8]  H. T. Shu,et al.  Longitudinal vibration of a hoist rope coupled with the vertical vibration of an elevator car , 1991 .

[9]  Masayoshi Kato,et al.  Vibrations of a String with Time-Variable Length , 1978 .

[10]  Weidong Zhu,et al.  Theoretical and Experimental Investigation of Elevator Cable Dynamics and Control , 2006 .

[11]  C. D. Mote.  On the Nonlinear Oscillation of an Axially Moving String , 1966 .

[12]  J. W. Humberston.  Classical mechanics , 1980, Nature.

[13]  Weidong Zhu,et al.  Forced response of translating media with variable length and tension: Application to high-speed elevators , 2005 .

[14]  Max Irvine.  Local Bending Stresses In Cables , 1993 .

[15]  C. W. Gear,et al.  Automatic integration of Euler-Lagrange equations with constraints , 1985 .