Analysis of the Seismic Risk of Major-Hazard Industrial Plants and Applicability of Innovative Seismic Protection Systems

Seismic action can cause serious accidents to industrial plants as shown in several occasions. The actual worldwide situation of major-hazard plants against earthquakes should be considered as critical. For instance, in Italy about 30% of industrial plants with majoraccident hazards are located in areas with a high seismic risk. In addition, in case of a seismic event, the earthquake can induce the simultaneous damage of different apparatus, whose effects can be amplified because of the failure of safety systems or the simultaneous generation of multiple accidental chains. (a) (b)

[1]  G. Housner The dynamic behavior of water tanks , 1963 .

[2]  Salvatore Perno,et al.  Design, test and analysis of a light‐weight dissipative bracing system for seismic protection of structures , 2007 .

[3]  Halil Sezen,et al.  Dynamic analysis and seismic performance evaluation of above-ground liquid-containing tanks , 2008 .

[4]  Paul SUMMERS,et al.  DEVELOPMENT OF NEW BASE ISOLATION DEVICES FOR APPLICATION AT REFINERIES AND PETROCHEMICAL FACILITIES , 2002 .

[5]  Renato Giannini,et al.  SEISMIC VULNERABILITY OF MAJOR-HAZARD INDUSTRIAL PLANTS AND APPLICABILITY OF INNOVATIVE SEISMIC PROTECTION SYSTEMS FOR ITS REDUCTION , 2009 .

[6]  M. H. El Naggar,et al.  On the performance of SCF in seismic isolation of the interior equipment of buildings , 2007 .

[7]  V Ciampi A METHODOLOGY FOR THE DESIGN OF ENERGY DISSIPATION DEVICE FOR THE SEISMIC PROTECTION OF BRIDGES , 1998 .

[8]  Halil SEZEN,et al.  PERFORMANCE OF INDUSTRIAL FACILITIES DURING THE 1999 , KOCAELI , TURKEY EARTHQUAKE , 2002 .

[9]  Mete A. Sozen,et al.  Evaluation of Effect of August 17, 1999, Marmara Earthquake on Two Tall Reinforced Concrete Chimneys , 2003 .

[10]  Ken Hatayama,et al.  Lessons from the 2003 Tokachi-oki, Japan, earthquake for prediction of long-period strong ground motions and sloshing damage to oil storage tanks , 2008 .

[11]  Mary Fran Myers,et al.  Natural disasters as the cause of technological emergencies : a review of the decade 1980 - 1989 , 1992 .

[12]  D. Fischer,et al.  Dynamic fluid effects in liquid‐filled flexible cylindrical tanks , 1979 .

[13]  Chien Ming Wang,et al.  Effectiveness of tuned liquid column dampers for vibration control of towers , 1995 .

[14]  Anna Reggio,et al.  Feasibility of a passive isolation system with nonlinear hysteretic behaviour for the seismic protection of critical equipment , 2011 .

[15]  M. De Angelis,et al.  Optimal passive control of adjacent structures interconnected with nonlinear hysteretic devices , 2007 .

[16]  Stephen A. Mahin,et al.  EXPERIMENTAL AND ANALYTICAL STUDIES OF FIXED-BASE AND SEISMICALLY ISOLATED LIQUID STORAGE TANKS , 2009 .

[17]  Anne S. Kiremidjian,et al.  DAMAGE TO OIL REFINERIES FROM MAJOR EARTHQUAKES , 1986 .

[18]  R. Inoue,et al.  SOME CONSIDERATIONS ON SEISMIC DESIGN AND CONTROLS OF SLOSHING IN FLOATING-ROOFED OIL TANKS , 2008 .

[19]  Yu Tang,et al.  Rocking Response of Liquid Storage Tanks , 1987 .

[20]  M. De Angelis,et al.  A reduced order model for optimal design of 2-mdof adjacent structures connected by hysteretic dampers , 2007 .

[21]  Medhat A. Haroun,et al.  Earthquake Response of Deformable Liquid Storage Tanks , 1981 .

[22]  Fabrizio Paolacci,et al.  Design of yielding or friction-based dissipative bracings for seismic protection of buildings , 1995 .

[23]  Kohei Suzuki,et al.  REPORT ON DAMAGE TO INDUSTRIAL FACILITIES IN THE 1999 KOCAELI EARTHQUAKE, TURKEY , 2002 .

[24]  Salvatore Perno,et al.  Dynamic response and optimal design of structures with large mass ratio TMD , 2012 .

[25]  F. Sakai,et al.  Sloshing behavior of floating-roof oil storage tanks , 1984 .

[26]  Kohei Suzuki,et al.  Earthquake Damage to Industrial Facilities and Development of Seismic and Vibration Control Technology – Based on Experience from the 1995 Kobe (Hanshin-Awaji) Earthquake – , 2006 .

[27]  Henri P. Gavin,et al.  Reliability of base isolation for the protection of critical equipment from earthquake hazards , 2005 .

[28]  Huo Linsheng State-of-art on structural control research of market-based control , 2005 .

[29]  J. Bardet,et al.  Kocaeli, Turkey, earthquake of August 17, 1999 reconnaissance report , 2000 .

[30]  Yozo Fujino,et al.  Optimal tuned mass damper for seismic applications and practical design formulas , 2008 .

[31]  Eser Durukal,et al.  Damage to and vulnerability of industry in the 1999 Kocaeli, Turkey, earthquake , 2003 .

[32]  Fabrizio Paolacci,et al.  Study of the effectiveness of steel cable dampers for the seismic protection of electrical equipment , 2008 .

[33]  Renato Giannini,et al.  Applicability of passive control systems for seismic protection of major-hazard industrial plants , 2010 .

[34]  Robert A. Meyers,et al.  Handbook of Petroleum Refining Processes , 2003 .