CFD simulation of hydrodynamics on the dense zone on a 65 t/h oil shale-fired high–low bed CFB boiler

[1]  S. Ergun.  Fluid flow through packed columns , 1952 .

[2]  C. Wen.  Mechanics of Fluidization , 1966 .

[3]  B. Launder,et al.  Lectures in mathematical models of turbulence , 1972 .

[4]  R. D. Lanauze,et al.  A circulating fluidised bed , 1976 .

[5]  David J. Jeffrey,et al.  The stress tensor in a granular flow at high shear rates , 1981, Journal of Fluid Mechanics.

[6]  J. Jenkins,et al.  A theory for the rapid flow of identical, smooth, nearly elastic, spherical particles , 1983, Journal of Fluid Mechanics.

[7]  D. Jeffrey,et al.  Kinetic theories for granular flow: inelastic particles in Couette flow and slightly inelastic particles in a general flowfield , 1984, Journal of Fluid Mechanics.

[8]  David G. Schaeffer,et al.  Instability in the evolution equations describing incompressible granular flow , 1987 .

[9]  R. Jackson,et al.  Frictional–collisional constitutive relations for granular materials, with application to plane shearing , 1987, Journal of Fluid Mechanics.

[10]  D. Gidaspow,et al.  A bubbling fluidization model using kinetic theory of granular flow , 1990 .

[11]  M. Syamlal,et al.  MFIX documentation theory guide , 1993 .

[12]  John R. Grace,et al.  Circulating fluidized beds , 1996 .

[13]  Jc Jaap Schouten,et al.  A single radiotracer particle method for the determination of solids circulation rate in interconnected fluidized beds , 1997 .

[14]  S. D. Kim,et al.  Circulation of solids and gas bypassing in an internally circulating fluidized bed with a draft tube , 1997 .

[15]  Ananias G. Tomboulides,et al.  A Quasi-Two-Dimensional Benchmark Problem for Low Mach Number Compressible Codes , 1998 .

[16]  Xu Xiangdong.  Study on the mathematical model of the differential velocity fluidized bed , 1998 .

[17]  L. Mleczko,et al.  CFD modeling of an internally circulating fluidized-bed reactor , 1999 .

[18]  Won Namkung,et al.  Effect of temperature on gas bypassing and solids circulation rate in an internally circulating fluidized bed , 2000 .

[19]  He Yurong,et al.  Size segregation of binary mixture of solids in bubbling fluidized beds , 2003 .

[20]  Wei Ge,et al.  CFD simulation of concurrent-up gas-solid flow in circulating fluidized beds with structure-dependent drag coefficient , 2003 .

[21]  D. Gidaspow,et al.  Hydrodynamics of binary fluidization in a riser : CFD simulation using two granular temperatures , 2003 .

[22]  F. Taghipour,et al.  Experimental and computational study of gas¿solid fluidized bed hydrodynamics , 2005 .

[23]  Jam Hans Kuipers,et al.  Modelling of large-scale dense gas-solid bubbling fluidised beds using a novel discrete bubble model , 2006 .

[24]  Deng Yong.  The Internal Circulation Dynamic Flow Characteristic and Technical Characteristic of High-low Bed Boiler , 2007 .

[25]  Yu Geng-sun.  Brief Talk to the Design of 65 t/h Oil-shale-fired Circulating Fluidized Bed Boiler with High-low Bed , 2008 .

[26]  Yong Kang,et al.  Solid circulation and gas bypassing characteristics in a square internally circulating fluidized bed with draft tube , 2008 .

[27]  Joachim Werther,et al.  CFD-simulation of a circulating fluidized bed riser , 2009 .

[28]  Jinghai Li,et al.  3D CFD simulation of hydrodynamics of a 150 MWe circulating fluidized bed boiler , 2010 .

[29]  Kok-Seng Lim,et al.  EXPERIMENTAL QUANTIFICATION OF THE SOLIDS FLUX IN AN INTERNALLY CIRCULATING FLUIDIZED BED , 2010 .

[30]  Schalk Cloete,et al.  A fine resolution parametric study on the numerical simulation of gas–solid flows in a periodic riser section , 2011 .

[31]  Wei Ge,et al.  SPH method for two-fluid modeling of particle–fluid fluidization , 2011 .

[32]  Simone Melchionna,et al.  Incorporation of smooth spherical bodies in the Lattice Boltzmann method , 2011, J. Comput. Phys..

[33]  Teklay Weldeabzgi Asegehegn,et al.  Influence of two- and three-dimensional simulations on bubble behavior in gas–solid fluidized beds with and without immersed horizontal tubes , 2012 .

[34]  Christian Doblin,et al.  CFD modeling of gas–solid flow in an internally circulating fluidized bed , 2012 .

[35]  Wang Qing,et al.  APPLICATION OF HIGH-LOW BED CFB COMBUSTION TECHNOLOGY TO OIL SHALE COMBUSTION , 2013 .

[36]  S. Patankar.  Numerical Heat Transfer and Fluid Flow , 2018, Lecture Notes in Mechanical Engineering.