Multichannel EEG with novel Ti/TiN dry electrodes

Abstract Research using multichannel electroencephalographic recordings is increasingly characterized by greater numbers of electrodes. With up to 256 silver/silver chloride (Ag/AgCl) electrodes, preparation and electrode placement is time consuming and error prone. We propose a novel type of dry titanium/titanium nitride (Ti/TiN) electrode, integrated into a novel electroencephalography (EEG) cap based on pneumatic-driven mechanisms. The electrodes were characterized electrochemically and comparative biosignal measurements were carried out. In a NaCl solution, the impedance values were between 824 and 54 Ω and the phase values between –52 and –10° at frequencies between 5 Hz and 10 kHz for the Ti/TiN electrodes. For resting-state EEG, and with eye movements, alpha activity, and pattern reversal visual evoked potential (VEP), there were no significant differences between adjacent novel Ti/TiN and standard Ag/AgCl electrodes in 97.2% of the signal episodes investigated. The potential maps for pattern reversal VEP were similar with both types of electrodes. In conclusion, our novel cap system based on Ti/TiN electrodes and pneumatic-driven mechanisms enables completely dry EEG acquisition and can thus potentially replace conventional Ag/AgCl electrodes due to similar signal quality.

[1]  Richard J. Davidson,et al.  Effects of electrode density and electrolyte spreading in dense array electroencephalographic recording , 2004, Clinical Neurophysiology.

[2]  Michael Bach,et al.  ISCEV standard for clinical visual evoked potentials (2009 update) , 2010, Documenta Ophthalmologica.

[3]  Mariana S Fernandes,et al.  Hydrogel-based photonic sensor for a biopotential wearable recording system. , 2010, Biosensors & bioelectronics.

[4]  João M. Nóbrega,et al.  Development of a quasi-dry electrode for EEG recording , 2013 .

[5]  S. Lanceros‐Méndez,et al.  Influence of nitrogen content on the structural, mechanical and electrical properties of TiN thin films , 2005 .

[6]  Robert T. Knight,et al.  An active, microfabricated, scalp electrode array for EEG recording , 1996 .

[7]  Hongda Chen,et al.  Poly(3,4-ethylenedioxythiophene) (PEDOT) as interface material for improving electrochemical performance of microneedles array-based dry electrode , 2013 .

[8]  Tzyy-Ping Jung,et al.  Biosensor Technologies for Augmented Brain–Computer Interfaces in the Next Decades , 2012, Proceedings of the IEEE.

[9]  Orfeo Sbaizero,et al.  Bioactivity of TiN-coated titanium implants , 2004 .

[10]  C. Grozea,et al.  Bristle-sensors—low-cost flexible passive dry EEG electrodes for neurofeedback and BCI applications , 2011, Journal of neural engineering.

[11]  T. Jung,et al.  Dry and Noncontact EEG Sensors for Mobile Brain–Computer Interfaces , 2012, IEEE Transactions on Neural Systems and Rehabilitation Engineering.

[12]  L. Kirkup,et al.  A direct comparison of wet, dry and insulating bioelectric recording electrodes. , 2000, Physiological measurement.

[13]  L. Poole-Warren,et al.  Conducting polymer-hydrogels for medical electrode applications , 2010, Science and technology of advanced materials.

[14]  Göran Stemme,et al.  Characterization of micromachined spiked biopotential electrodes , 2002, IEEE Transactions on Biomedical Engineering.

[15]  R T Knight,et al.  A dry electrode for EEG recording. , 1994, Electroencephalography and clinical neurophysiology.

[16]  N. P. Barradas,et al.  TiNx coated polycarbonate for bio-electrode applications , 2012 .

[17]  Roberto Merletti,et al.  The electrode-skin interface and optimal detection of bioelectric signals. , 2010, Physiological measurement.

[18]  André van Schaik,et al.  A new EEG recording system for passive dry electrodes , 2010, Clinical Neurophysiology.

[19]  H. Jasper,et al.  The ten-twenty electrode system of the International Federation. The International Federation of Clinical Neurophysiology. , 1999, Electroencephalography and clinical neurophysiology. Supplement.

[20]  Alan H. Greenaway,et al.  Optical aperture synthesis , 1991 .

[21]  Giulio Ruffini,et al.  A dry electrophysiology electrode using CNT arrays , 2005, physics/0510145.

[22]  Lutz Trahms,et al.  Recent advances in modeling and analysis of bioelectric and biomagnetic sources , 2010, Biomedizinische Technik. Biomedical engineering.

[23]  Michiro Negishi,et al.  An EEG (electroencephalogram) recording system with carbon wire electrodes for simultaneous EEG-fMRI (functional magnetic resonance imaging) recording , 2008, Journal of Neuroscience Methods.

[24]  J. Haueisen,et al.  Electrochemical behaviour of nanocomposite Agx:TiN thin films for dry biopotential electrodes , 2014 .

[25]  Andrea Pollick,et al.  Photrode optical sensor for electrophysiological monitoring. , 2003, Aviation, space, and environmental medicine.

[26]  Meinhard Schilling,et al.  Capacitive ECG system with direct access to standard leads and body surface potential mapping / Kapazitives EKG-System zur Messung von Standardableitungen und Body-Surface-Potential-Maps , 2009, Biomedizinische Technik. Biomedical engineering.

[27]  Pietro Salvo,et al.  A 3D printed dry electrode for ECG/EEG recording , 2012 .

[28]  Dietrich Lehmann,et al.  Spatial analysis of evoked potentials in man—a review , 1984, Progress in Neurobiology.

[29]  F. Vaz,et al.  The role of composition, morphology and crystalline structure in the electrochemical behaviour of TiNx thin films for dry electrode sensor materials , 2009 .

[30]  José Higino Correia,et al.  New dry electrodes based on iridium oxide (IrO) for non-invasive biopotential recordings and stimulation , 2010 .

[31]  M. Teplan FUNDAMENTALS OF EEG MEASUREMENT , 2002 .

[32]  Jens Haueisen,et al.  Novel TiNx-based biosignal electrodes for electroencephalography , 2011 .

[33]  Sang-Hoon Lee,et al.  A capacitive, biocompatible and adhesive electrode for long-term and cap-free monitoring of EEG signals. , 2013, Journal of neural engineering.

[34]  Rui Escadas Martins,et al.  A Novel Dry Active Electrode for EEG Recording , 2007, IEEE Transactions on Biomedical Engineering.